01-232-9853
Sleeve Spacer
01-233-0025
Nonmetallic Bushing
0.500" overall length 0.450" center hole diameter countersunk feat. incl 0.120 in. dp 90.0 deg angle round
01-233-0182
Shim
Used on frame lug plate,canister peacekeeper. 9.750" overall length 1.000" overall width has one bolt hole located 3.163 in. from outside edge to bolt hole center along width rectangular
01-233-0183
Shim
Used on frame lug plate,canister. 9.750" overall length 1.700" overall width has 4 bolt holes located 0.500 in. from outside edge to bolt hole center along length with the following placement along length-1st 1.312 in., 2nd 4.062 in., 3rd 6.562 in., and 4th 8.312 in. rectangular
01-233-0184
Shim
Used on support annulus,weapon sys.b-1b. 4.530" outside diameter circular
01-233-0185
Shim
Used on support annulus,weapon sys b1b. 4.530" outside diameter circular
01-233-0189
Shim
Used on canister. 0.312" hole diameter 8.750" overall length 5.750" overall width 2 bolt hole quantity all surfaces have 250.0 microinch finish non-circular w/bolt holes
01-233-0190
Shim
Used on canister,peacekeeper. 0.311" hole diameter 3.500" overall length 0.250" overall width 4 bolt hole quantity 2 corners lgth side, beveled 0.250 in. by 0.380 in. non-circular w/bolt holes
01-233-0191
Shim
Used on switch,canister peacekeeper. 0.311" hole diameter 1.880" overall length 1.000" overall width non-circular w/beveled corners
01-233-0316
Ring Spacer
4.090" inside diameter
01-233-0559
Sleeve Spacer
01-233-0908
Sleeve Spacer
Used on holder-bevel gearshaft drive,fuel pump end. 1.1000" overall length 17c solid, plain, no outside flanges
01-233-0909
Sleeve Spacer
Used on holder-bevel gearshaft drive,fuel pump end. 0.5000" overall length 17c solid, plain, no outside flanges
01-233-0921
Machine Thread Plug
01-233-1314
Sleeve Spacer
0.6050" overall length 22c solid, external flange one end
01-233-1364
Sleeve Spacer
01-233-1365
Sleeve Spacer
01-233-1366
Sleeve Spacer
01-233-1383
Stepped Spacer
01-233-1449
Machine Thread Plug
Temper, T4
01-233-1463
Ring Spacer
2.870" inside diameter cadmium surface treated
01-233-1515
Machine Thread Bushing
Right-hand 1.000" overall length 12 thread quantity per inch unf thread series
01-233-1862
Sleeve Spacer
Used on uh-60 turbine engine, rotary wing aircraft.
01-233-1993
Sleeve Spacer
0.2880" overall length passivate surface treated 17c solid, plain, no outside flanges
01-233-2085
Sleeve Spacer
0.9400" overall length passivate surface treated 17c solid, plain, no outside flanges
01-233-2086
Sleeve Spacer
01-233-2828
Machine Thread Plug
01-233-2888
Plate Spacer
0.250" hole diameter 2.060" overall length 1.160" overall width 2 bolt hole quantity rectangular
01-233-2977
Plate Spacer
2.000" overall length 0.500" overall width rectangular
01-233-2996
Sleeve Spacer
17c solid, plain, no outside flanges
01-233-2997
Sleeve Spacer
17c solid, plain, no outside flanges
