And Spacers Shims Rings Bushings FSG 53 — FSC 5365

NSN
NIIN
Name
Details
01-210-1035
Machine Thread Bushing
Right-hand 1.312" overall length 12 thread quantity per inch 4 wrench hols 0.500 in. nom. deep, equally spaced on 6.000 in. nom. dia circle, both ends chamfered at 45.0 deg. angle, 0.062 in. nom. width un thread series
01-210-1513
Machine Thread Plug
01-210-1570
Plate Spacer
01-210-1584
Plate Spacer
Used on truck, vehicle system, 1 1/4 ton.
01-210-1614
Shim
01-210-1616
Shim
01-210-1617
Shim
01-210-1627
Ring Spacer
01-210-1628
Plate Spacer
0.530" hole diameter 5.620" overall length 2.700" overall width 4 bolt hole quantity zinc or cadmium surface treated non-circular w/bolt holes
01-210-1629
Plate Spacer
01-210-1630
Plate Spacer
1.000" overall length 0.710" overall width primer surface treated non-circular w/o bolt holes
01-210-1698
Shim
01-210-1699
Shim
01-210-1700
Shim
01-210-1701
Shim
2.000" outside diameter circular
01-210-1702
Shim
01-210-1703
Shim
01-210-1704
Shim
01-210-1705
Shim
01-210-1706
Shim
0.190" overall length passivate surface treated square
01-210-1707
Shim
01-210-1708
Shim
0.180" outside diameter passivate surface treated circular
01-210-1749
Sleeve Spacer
3.5030" overall length flanges located 0.1400 in. min, 0.2000 in. max from each end anodize surface treated
01-210-1750
Sleeve Spacer
0.7000" overall length 17c solid, plain, no outside flanges
01-210-1751
Sleeve Spacer
0.6560" overall length 17c solid, plain, no outside flanges
01-210-1752
Sleeve Spacer
01-210-1753
Sleeve Spacer
0.6850" overall length passivate surface treated 17c solid, plain, no outside flanges
01-210-1754
Sleeve Spacer
01-210-1755
Sleeve Spacer
01-210-1756
Sleeve Spacer
01-210-1803
Shim Set
01-210-1804
Shim Set
01-210-1843
Tapered Bushing
01-210-1848
Ring Spacer
01-210-1849
Ring Spacer
01-210-1850
Ring Spacer
1.185" inside diameter
01-210-1851
Ring Spacer
1.185" inside diameter
01-210-1852
Ring Spacer
1.185" inside diameter
01-210-1853
Ring Spacer
1.185" inside diameter
01-210-1903
Shim
01-210-2321
Shim
01-210-2334
Sleeve Spacer
1.5590" overall length flanges located 0.1400 in. min, 0.2000 in. max from each end anodize surface treated
01-210-2335
Sleeve Spacer
4.1950" overall length 17c solid, plain, no outside flanges
01-210-2336
Sleeve Spacer
0.3400" overall length 22c solid, external flange one end
01-210-2337
Sleeve Spacer
1.7500" overall length 17c solid, plain, no outside flanges
01-210-2347
Machine Thread Plug
Right-hand external 0.160" external thread length 0.500" overall length 20 external thread quantity per inch undercut below head 0.094 in. wide by 0.656 in. dia oxide surface treated plug, machine
01-210-2665
Shim
01-210-2868
Shim
01-210-2869
Ring Spacer
01-210-2890
Ring Spacer
Used on mhu-7/m. spacer, ring; material, steel, cadmium plated; round hole, dia, 2.375 in min