01-191-5862
Ring Spacer
0.575" inside diameter
01-191-6049
Machine Thread Plug
01-191-6156
Sleeve Spacer
01-191-7167
Externally Threaded Ring
01-191-7213
Machine Thread Plug
2a external thread class right-hand external 1.000" external thread length 1.875" overall length 8 external thread quantity per inch un external thread series
01-191-7314
Machine Thread Plug
01-191-7342
Externally Threaded Ring
01-191-7343
Externally Threaded Ring
01-191-7344
Nonmetallic Bushing
Bushing, rubber
01-191-7547
Sleeve Spacer
01-191-7548
Sleeve Spacer
3.9794" overall length gray anodize or blue chromate anodize or chromate surface treated 17c solid, plain, no outside flanges
01-191-7551
Sleeve Spacer
0.0700" overall length anodize surface treated 17c solid, plain, no outside flanges
01-191-7752
Externally Threaded Ring
01-191-7754
Externally Threaded Ring
01-191-7755
Externally Threaded Ring
2a thread class right-hand 0.280" overall length 0.094" bore diameter both end counterbored 0.116 in. dia passivate, qq-p-35, ty 2 surface treated
01-191-7780
Machine Thread Bushing
01-191-7781
Tapered Bushing
0.3750" inside diameter 1.790" overall length cadmium surface treated
01-191-7783
Shim
0.116" hole diameter 1.245" outside diameter 3 bolt hole quantity 3 flat top tabs 0.250 in. wide
01-191-7784
Shim
0.250" hole diameter 1.470" overall length 0.880" overall width 2 bolt hole quantity pressure sensitive adhesive bonding film one side of shim
01-191-8015
Machine Thread Plug
01-191-8016
Machine Thread Plug
01-191-8128
Sleeve Spacer
3.8070" overall length flanges are 0.156 in. from each end anodize surface treated 18c solid, external flanges both ends
01-191-8130
Sleeve Spacer
01-191-8276
Sleeve Spacer
0.3500" overall length 17c solid, plain, no outside flanges
01-191-8945
Nonmetallic Bushing
0.660" overall length 0.110" center hole diameter round
01-191-9576
Machine Thread Bushing
Right-hand 0.750" overall length 18 thread quantity per inch unf thread series
01-192-0757
Machine Thread Plug
2a internal thread class right-hand internal 0.280" internal thread length 1.080" overall length 28 internal thread quantity per inch plug, machine unf internal thread series
01-192-0974
Shim
Used on an/alr-56c radar rec. 0.108" hole diameter 1.200" overall length 1.000" overall width 4 bolt hole quantity non-circular w/bolt holes
01-192-1517
Sleeve Spacer
0.3750" overall length 17c solid, plain, no outside flanges
01-192-1518
Sleeve Spacer
0.9400" overall length anodize surface treated 17c solid, plain, no outside flanges
01-192-1831
Ring Spacer
2.890" inside diameter
01-192-1833
Ring Spacer
5.030" inside diameter chamfered, 0.060 in. by 45 degrees
01-192-1835
Plate Spacer
Used on f/a-18 aircraft. 0.356" hole diameter 71.500" overall length 0.486" overall width 52 bolt hole quantity navy) shim - gang channel non-circular w/square corners
01-192-2110
Machine Thread Plug
01-192-2140
Nonmetallic Bushing
Bushing, rubber
