5365014155263
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
5365-01-415-5263 Specification Set by the OEM (see RNCC code 3)
0.620in.
1.300in.
0.063in.
2
one bolt hole has diameter of 0.196 in.; second bolt hole has diameter of 0.125 in.; center to center distance between bolt holes along length is 0.790 in.; distance from bolt hole centerline to nearest edge along width is 0, 310 in.; distance from larger bolt hole centerline to nearest edge along length is 0.310 in.; distance from smaller bolt hole centerline to nearest edge along length is 0.200 in.; four corners are unequally beveled; outside corner bevel length along width is 0.120 in. for two corners located by larger bolt hole; outside corner bevel length along length is 0.120 in. for two corners located by larger bolt hole; outside corner bevel length along width is 0.250 in. for two corners located by smaller bolt hole; outside bevel length along length is 0.250 in. for two corners located by smaller bolt hole.
steel comp 304
QQ-S-766 fed spec single material response
passivate
QQ-P-35, ty 4 fed spec single treatment response
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "SPACER,SPECIAL SHAPED"
A metallic or nonmetallic item of various peripheral shapes and a solid cross-section. It is designed to maintain a predetermined distance between two surfaces. It may have flat parallel bearing surfaces. Do not use if a more specific name applies. See also spacer, ring; spacer, plate; spacer, sleeve; spacer, stepped; shim and washer, flat.
5365-01-415-5263 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Material Management Material categorization and source of supply
Northrop grumman is acs for depot storage only 6401 s. Air depot blvd oklahoma city, ok 73135-5911
B-2 aircraft, total system support partnership (tssp)
Material Codes
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
