01-617-1603
Knob
Used on nha: variable magic arm, p/n sa-a1 (05287); 4mm verif sys; 4mm orange tip assy; 6mm yellow tip. knob, magic arm fluted foils
01-617-3818
Knob Shank
Used on cradle,generator. knob, stud
01-617-4325
Knob
Used on 7360-01-579-1956. 2.000" outside diameter knob, skirted, with indicator arrow knob has an 8-32 x 3/8 inch hex socket head set screw skirted round with window
01-617-4393
Knob
Used on 7360015791956. knob, thermos skirted round with window
01-617-4513
Lock Dial-knob
Knob lock locking knob for xa swivel ball
01-617-4524
Knob
Knob, friction friction knob for xa ball swivel ball
01-618-1709
Knob
Used on 4320-01-507-0595. knob for cover
01-618-1816
Knob
Used on 6625-01-558-8041. 1.250" outside diameter knob, elevation adjust round concentric
01-618-3055
Knob
Used on an/usc-171.
01-618-3416
Knob
Used on transfer unit. knob
01-618-3419
Knob
Used on transfer unit. knob
01-618-4205
Knob
Used on 6625-01-558-8041. 0.750" outside diameter knob, elevation lock round
01-618-7936
Knob
Used on explorer gx1600, 25 watt vhf/fm marine tranceiver; radio transce. description: vol
01-618-8037
Knob
Used on explorer gx1600, 25 watt (vhf/fm) marine tranceiver; radio, trance. knob, mounting bracket; mounting bracket knob description: mounting bracket knob (black) ; note: GX1500s was discontinued direct replacement is GX1600
01-619-2175
Knob
0.620" outside diameter drive knob round
01-619-4161
Knob
Used on stryker. tilt, knob assembly bar
01-619-4163
Knob
Used on stryker. pivot, knob assembly bar
01-619-6302
Knob
0.925" outside diameter knob height: 1"
01-619-6562
Knob
Used on oj-741(p). knob
01-619-7246
Control Dial
Ecos-o elevation adjustment dial assembly. 0.1 mil adjustment increments. zero lock. matte black finish. repair part for ecos-o scope, 1240-01-619-6433
01-619-7283
Dial Cover
Ecos-o windage adjustment dial cap. matte black finish. repair part for ecos-o scope, 1240-01-619-6433
01-619-7288
Control Dial
Ecos-o windage adjusment dial assembly. 0.1 mil adjustment increments. matte black finish. repair part for ecos-o scope, 1240-01-619-6433
01-619-7291
Control Dial
Ecos-o side focus dial. matte black finish. repair part for ecos-o non-illuminated scope, 1240-01-619-6433. width: 1.48 in; weight: 0.03 lb
01-619-7830
Control Dial-knob Insert
Used on miscellaneous artillery.
01-620-0815
Knob
Used on SLICER. slice thickness control round with bar face
01-620-1394
Control Dial
Used on sentinel class fast response cutter b (frc-b). dial, thermostat source data id 3640 pccn SE0557 plisn A005; next higher assembly range/oven p/n EV36-s-4fp-12g-480 round w/knob
01-620-2724
Knob
Used on sentinel class fast response cutter b (frc-b). knob, switch cms data id 5147 pccn SE0406 plisn A011; next higher assembly 4540-01-615-0922 compactor, refuse
01-620-2770
Dial Cover
Ecos-o sight adjustment cap. protects windage
01-620-3968
Knob
Used on sentinel class fast response cutter b (frc-b). knob-electric (480v) cms data id 3640 pccn SE0557 plisn A011; next higher assembly range/oven p/n EV36-s-4fp-12g-480
01-620-6386
Knob
Used on cutmaster. control knob
01-620-9206
Knob
0.5" inside diameter 1.375" outside diameter 16 stud thread quantity per inch handle, rod pivet knob has a temperature range of -70 - 200 degrees f. shaft is black-oxide steel. ball unc stud thread series
01-621-0181
Knob
Used on 2320-01-540-2038. 2.00" outside diameter 16 stud thread quantity per inch round with fluted foils unc stud thread series
01-621-0445
Control Dial
Ecos-o elevation set screw. repair item for the ecos-o scope - non-illuminated, nsn 1240-01-619-6564,
