Commercial Hardware - Supply Class (FSC) 5340

5340-01-019-2973

01-019-2973

Solid Plain Disk

5340-01-019-2974

01-019-2974

Solid Plain Disk

5340-01-019-2976

01-019-2976

Retaining Strap

1.672" overall length 0.500" overall width 0.032" material thickness saddle arch

5340-01-019-2977

01-019-2977

Retaining Strap

1.938" overall length 0.500" overall width 0.040" material thickness saddle arch

5340-01-019-2978

01-019-2978

Mortise Lock Set

5340-01-019-2979

01-019-2979

Quick Release Plunger

0.562" thread length 18 thread quantity per inch unc thread series

5340-01-019-2981

01-019-2981

Spring Tension Clip

0.159" hole diameter 0.029" material thickness cadmium surface treated

5340-01-019-2984

01-019-2984

Loop Clamp

0.500" overall width 0.062" material thickness cushion tinted green passivate band surface treated

5340-01-019-2986

01-019-2986

Loop Clamp

0.500" overall width 0.032" material thickness cadmium band or zinc band surface treated multiple loop

5340-01-019-2987

01-019-2987

Loop Clamp

0.375" overall width 0.040" material thickness single loop

5340-01-019-3298

01-019-3298

Drawer Extension Slide Section

Operational, slide automatically, lock latch, cabinet mtd, 150.0 lb load, life cycles, 10, 000.0, total, 21.000 in.l, 0.750 in.w, 4.000 in.h, wt 1.7;

5340-01-019-3384

01-019-3384

Nut And Bolt Locking Plate

5340-01-019-3386

01-019-3386

Retaining Strap

2.000" overall length 0.760" overall width 0.090" material thickness curved arch

5340-01-019-3387

01-019-3387

Retaining Strap

5.840" overall length 0.760" overall width 0.090" material thickness two slots 0.380 in. lg 0.188 in. w tapered arch

5340-01-019-3388

01-019-3388

Webbing Strap

5340-01-019-3395

01-019-3395

Access Cover

3.000" outside diameter 1.005 in. by 0.980 in. hole in center; each corner of the center hole isrounded out with a 0.125 in. dia hole; optional construction has no corner holes on center hole phosphate zinc surface treated

5340-01-019-3397

01-019-3397

Mounting Bracket

Material:steel, corrosion resisting, class 302, 304 or 305, cond a; thickness 0.190"; length of 6"; width of 4.875"; has angle of 80 degrees; one slot 2.688" in length; slot width of 0.469"; two holes with diameter of 0.266"; one hole center to second hole center is 1.500"

5340-01-019-3895

01-019-3895

Bail Handle

0.199" hole diameter rectangular open

5340-01-019-3954

01-019-3954

Nut And Bolt Retainer

2.000" overall length 1.460" overall width 0.160" material thickness cadmium surface treated

5340-01-019-3956

01-019-3956

Nut And Bolt Retainer

0.568" overall length 0.440" overall width 0.007" material thickness barrel