01-014-8108
Bow Handle
4.940" overall length mounting holes counterbored from top end 0.680 in. deep by 0.281 in. dia
01-014-8109
Rod End Connector
3a rod connection thread class right-hand rod connection 0.749" rod connection thread length unjf rod connection thread series
01-014-8110
Rod End Clevis
3b rod connection thread class right-hand rod connection 0.250" rod connection thread length 0.250" hole diameter 0.496" overall width passivate surface treated clevis unf rod connection thread series
01-014-8155
Synchro Clamp
0.107" hole diameter
01-014-8182
Mounting Bracket
Used on 4931-00-121-8707 test set,fire control subsystem an/gsm-249. one bracket leg measures 2.000 in.l. x 0.625 in. dia; other leg is approximately 3.808 in.l. x 0.375
01-014-8247
Protective Dust And Moisture Cap
01-014-8302
Doorstop
Base width:0.500 in.nom; base diameter:0.688 in.nom; base length:0.400 in.nom; projection length:3.000 in.nom; base height:0.720 in.nom; hook/keeper:not included; surface treatment:brass;
01-014-8565
Threaded Spacing Standoff
0.200" right external thread length passivate surface treated left internal
01-014-8774
Manual Control Lever
Used on 2350004366635. steel, consisting of handle, tube
01-014-8805
Flush Catch
Used on w/s:aircraft, thunderbolt ii, a-10.
01-014-8887
Helical Compression Spring Seat
0.8750" bore diameter
01-014-9320
Spring Tension Clip
0.090" hole diameter 0.013" material thickness cadmium surface treated standoff
01-014-9775
Electronic Equipmen Hardware Kit
01-014-9776
Strapping Seal
01-014-9898
Angle Bracket
Angle
01-015-0438
Flush Catch
Body matl steel; body surface treat. passivated
01-015-0541
Rod End Clevis
01-015-0581
Retaining Strap
Anodize or chromate surface treated
01-015-0601
Rim Latch
Mtg holes are threaded 10/32 nf-2b; hole diameter:0.190 in.; case shape:rectangular; hole spacing:4.375 in. c to c anodize case surface treated
01-015-0709
Mending Plate
1.015" overall length 0.500" overall width 0.056" material thickness rectangular
01-015-0783
Spring Tension Clip
0.019" material thickness tin surface treated
01-015-0866
Flush Catch
Cadmium surface treated flush lever actuator
01-015-0867
Flush Catch
Cadmium surface treated flush lever actuator
01-015-0929
Retaining Strap
1.250" overall length 0.625" overall width 0.045" material thickness zinc surface treated curved arch
01-015-0978
Key Blank
Brass, nickel-silver plated; bow style, regular; 6 active pins
01-015-1036
Angle Bracket
Angle
01-015-1037
Angle Bracket
Angle
01-015-1183
Nut And Bolt Retainer
1.562" overall length 0.812" overall width
01-015-1254
Webbing Strap
01-015-1831
Loop Clamp
0.490" overall width 0.035" material thickness offset mount
01-015-2199
Threaded Spacing Standoff
Passivate surface treated internally threaded full length
01-015-2253
Loop Clamp
0.490" overall width 0.022" material thickness passivate band surface treated offset mount
01-015-2335
Access Cover
0.250" hole diameter anodize surface treated
01-015-2503
Rod End Clevis
1.125" hole diameter zinc surface treated
01-015-2615
Loop Clamp
0.480" overall width 0.057" material thickness single loop
01-015-2616
Loop Clamp
0.484" overall width 0.045" material thickness single loop
01-015-2942
Mounting Bracket
Steel material, fed qq-s-635, comp 1020-1025, 1.00 in. thk? enamel, olive drab finish, mil-p-14105? arc shaped? 2.250 in. inside radius? 4.000in. outside radius? 2 holes 0.530 in. dia on arc? item used on exhaust stack, deep water fording kit
01-015-2959
Bow Handle
4.313" overall length
01-015-2984
Protective Dust And Moistur Plug
01-015-3048
Angle Bracket
Angle
01-015-4053
Straight Headless Rod
Used on aileron trim tab hinge rod hc130 coast guard aircraft. one end of the item has a 90 deg. bend which is AA0.255 cadmium actuator arm surface treated
01-015-4073
Access Cover
Used on an/arc-167 radio set.
01-015-4138
Butt Hinge
Used on w/s:aircraft,tomcat f-14. butt
01-015-4777
Protective Dust And Moisture Cap
