00-105-2735
Mounting Plate
Used on pccn k394.
00-105-2748
Angle Bracket
Enamel surface treated angle
00-105-2751
Angle Bracket
Primer surface treated angle
00-105-2755
Double Angle Bracket
Double angle
00-105-2756
Double Angle Bracket
Double angle
00-105-2759
Manual Control Lever
Steel qq-s-681 class 65-35 or steel mil-c-10005 comp C1020 to C1030, irregular shape, 3.880 in. 0/a lg 0.720 in. 0/a w, 1.120 in. 0/a h, 1 pivot hole 0.320 in. dia
00-105-2762
Angle Bracket
Angle
00-105-2763
Double Angle Bracket
00-105-2766
Access Cover
0.440" hole diameter
00-105-2785
Butt Hinge Leaf
00-105-2798
Angle Bracket
Angle
00-105-3976
Threaded Spacing Standoff
Projection both ends
00-105-3977
Threaded Spacing Standoff
Left internal
00-105-3992
Helical Compression Spr Retainer
Parallel
00-105-4079
Threaded Spacing Standoff
00-105-4096
Loop Clamp
0.250" overall width 0.018" material thickness passivate band surface treated center mount
00-105-4111
Swivel Caster
Swivel offset
00-105-4210
Spring Tension Clip
0.031" material thickness
00-105-4479
Helical Compression Spring Seat
Bore 0.375 in. lg anodize surface treated seat
00-105-5111
Mounting Bracket
00-105-5715
Protective Dust And Moi Cap-plug
00-105-5961
Sliding Door Hanger
92.500" overall length
00-105-6069
Retaining Strap
0.875" overall length 0.370" overall width 0.080" material thickness non turn bent tab on mounting hole end cadmium surface treated curved arch
00-105-6127
Mounting Bracket
Used on tank,combat,105mm,m60. 4.380" overall length anodize surface treated
00-105-6130
Mounting Plate
00-105-6132
Access Cover
6.500" inside diameter
00-105-6136
Mounting Plate
00-105-6140
Surface Bolt
Matl steel qq-s-631 or qq-s-634 comp 1015 T01025, final protective finish chromium plate qq-c-320 class 2b, 125.0 micro-inch finish all over, 3.940 in.o/a lg, 1.378 in.min, 1.383 in.max o/a dia, bolt tapered 11.0 deg to (d) shape one end, 1.000 in.d, slot 0.530 in.w, 1.370 in.lg cut along cl in opposite end parrallel to taper, pivot hole drilled on center 0.560 in.from end
00-105-6146
Manual Control Lever
Cd plate, ty 2, cl 2, qq-p-416, finish. welded construction. irregu- lar shaped. 9.810 in. lg 1st leg, w/one 0.187-0192 in. dia hole, 5.190 in. lg of 2nd leg, w/one 0.378-0.380 in. dia hole, 1.000 in. thk matl. w/one 0.438-0.443 in. dia hole locatedoff ctr of lever, w/bushing 0.687 to 0.692 in. od, steel, 1015 to 1025, qq-s-631 or qq-s-634
00-105-6150
Mounting Bracket
Aluminum alloy, qq-a-250/8 alloy 5052, temper H34, 0.125 in. thick, l shaped with a protrusion 0.120 in. in length, with a 0.120 in. radius bend left, off side of first leg, 1.250 in. wide, 2.190 in. long with a 0.380 in. dia hole, 0.750 in. from bottom 0.620 in. from second leg, 2.120 in. wide, 2.190 in. long with a slot 1.000 in. long, 0.380 in. wide, 0.250 in. from end, 1.340 in. from the bottom
00-105-6151
Double Angle Bracket
Double angle
00-105-6152
Mounting Bracket
Aluminum, alloy 5052, temper H34, qq-a-250/8, 0.125 in.thk., 63.876 in.lg., 6.305 in.h, 15-slots 0.380 in.w, 1.000 in.lg, 9002A2
00-105-6156
Mounting Plate
00-105-6204
Manual Control Lever
Material is steel casting grade 80-50 spec qq-s-681; optional material is steel forging, composition, 1030-1050 condition normalized, spec mil-s-46172, quench
00-105-6268
Angle Bracket
Chromate surface treated
00-105-6269
Angle Bracket
Chromate surface treated
00-105-6757
Threaded Spacing Standoff
Projection one end left
00-105-6833
Loop Clamp
0.500" overall width 0.051" material thickness rectangular
00-105-6878
Threaded Spacing Standoff
Projection one end
00-105-6893
Grooved Clamp Coupling Ferrule
2.375" overall length
00-105-7274
Threaded Spacing Standoff
Projection one end left
