00-103-5794
Lock-release Lever
Matl-alum. alloy 5083, temper H111, qq-a-200/4 (3/8 dia) or alloy 5086, temper H111, qq-a-200/5 or 6061, temper t-6, qq-a-225/8 anodize surface treated
00-103-5799
Cushioning Pad
00-103-6516
Drawer Extension Slide Section
00-103-6661
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
00-103-6663
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
00-103-6709
Strapping Seal
00-103-6913
Access Door Hinge
00-103-6938
Retaining Clip
00-103-7169
Threaded Spacing Standoff
Flanged with left internal thread
00-103-7170
Threaded Spacing Standoff
Flanged with left internal thread
00-103-7227
Mounting Bracket
Used on an/alt-32.
00-103-7746
Loop Clamp
0.281" overall width 0.032" material thickness any acceptable band surface treated single loop
00-103-8100
Access Cover
Used on 2805-01-276-5946.
00-103-8324
Rod End Connector
2b rod connection thread class right-hand rod connection cadmium surface treated connector unf rod connection thread series
00-103-8335
Rod End Connector
2a rod connection thread class right-hand rod connection cadmium surface treated connector unf rod connection thread series
00-103-8565
Helical Compression Spring Seat
0.4650" bore diameter
00-103-8813
Loop Clamp
0.750" overall width 0.109" material thickness anodize band surface treated center mount
00-103-8844
Access Cover
0.270" hole diameter
00-103-8882
Retaining Strap
4.750" overall length 1.000" overall width 0.328" material thickness double arch
00-103-8902
Access Cover
Used on 3805-00-727-6719. 10.000" inside diameter 0.312" hole diameter 10.531" outside diameter
00-103-8927
Access Cover
0.120" hole diameter
00-103-8965
Access Cover
Used on 6115-00-475-6573 generator set,diesel engine. 0.219" hole diameter enamel semigloss surface treated
00-103-9129
Access General Purpose Door
00-103-9291
Compression Cup
1.063" overall length 4.000" center hole diameter
00-103-9507
Helical Compression Spring Seat
Not casehardened
00-103-9508
Bumper
1.060" hole diameter 3.500" overall length 3.380" overall width
00-103-9562
Manual Control Lever
00-104-0340
Threaded Spacing Standoff
00-104-0357
Threaded Spacing Standoff
00-104-0437
Angle Bracket
Angle
00-104-1667
Threaded Spacing Standoff
00-104-1678
Threaded Spacing Standoff
Passivate surface treated internally threaded full length
00-104-2074
Access Cover
0.312" hole diameter
00-104-2075
Access Cover
0.312" hole diameter
00-104-2205
Compression Cup
9.562" overall length
00-104-2457
Loop Clamp
0.500" overall width 0.036" material thickness 32 thread quantity per inch passivate band surface treated clamp & bracket
00-104-2470
Drawer Extension Slide
00-104-2476
Manual Control Lever
Cd plate, ty 2, cl 3, qq-p-416. coat w/plastisol ty 2, cl 2, 3 or 4, mil-p-20689. welded construction. bracket, fscm 19207, p/n 11588910; plate, fscm 19207, p/n 11588905; platefscm 19207, p/n 11588908; tube, fscm 19207, p/n 11588907
00-104-2590
Sliding Door Track
O/a hgt 1.50 in.
00-104-2591
Sliding Door Track
O/a hgt 1.50 in.
00-104-2592
Sliding Door Track
Chromate surface treated
00-104-2833
Loop Clamp
0.250" overall width 0.032" material thickness offset mount
00-104-2981
Butt Hinge Leaf
00-104-3217
Angle Bracket
00-104-3406
Air Inlet-outlet Frame
6.125" overall length 5.125" overall width rectangular
00-104-4297
Bumper
0.250" hole diameter
00-104-4566
Mounting Bracket
Consists of 1 bracket pn 10911354fscm 19207, 1 pin pn 10870693 fscm 19207, 1 brace pn 10863679 fscm 19207
