00-907-8793
Rod End Clevis
0.187" hole diameter 0.510" overall width heli-coil p/n MS21209F4-15 inserted in base of clevis opposite prongs clevis
00-907-8964
Detent Plunger
00-907-8992
Webbing Strap
00-907-8993
Webbing Strap
00-907-9030
Catch Strike
Used on M551. 1.250" overall width 0.500" material thickness primer surface treated
00-907-9038
Bumper
1.406" overall length 1.000" overall width item has 1 hole, 0.375" dia, 0.938" deep
00-907-9079
Retaining Clip
Eaa nsn 2350008735408, 2350001405151 pin
00-907-9317
Access Cover
0.190" hole diameter
00-907-9318
Access Cover
0.190" hole diameter
00-907-9327
Helical Compression Spring Seat
0.2570" bore diameter both ends of item are chamfered seat
00-907-9662
Elastic Strap
2350-00-873-5408
00-907-9879
Angle Bracket
00-907-9930
Manual Control Lever
Used on aircraft model c141. aluminum alloy, AMS4260
00-907-9931
Manual Control Lever
Used on aircraft model c141. aluminum alloy, AMS4260
00-908-0568
Double Angle Bracket
Adjacent angles
00-908-0569
Retaining Strap
3.080" overall length 0.600" overall width 0.057 mils material thickness curved arch
00-908-0641
Spring Holder
Used on teletypewritter set,an/ggc-15.
00-908-0652
Spring Holder
00-908-0653
Spring Holder
00-908-0654
Spring Holder
00-908-0655
Spring Holder
00-908-0724
Threaded Spacing Standoff
0.094 in. dia hole in ternally threaded passivate surface treated internally threaded full length
00-908-0855
Access Cover
1.736" outside diameter
00-908-0906
Loop Clamp
1.280" overall width stud turnlock passivate band surface treated
00-908-1374
Threaded Spacing Standoff
2b left internal (includes thru thread) 2a right external thread class right-hand left internal (includes thru thread) 0.188" left internal (includes thru thread) 1.000" right external thread length 40 left internal (includes thru thread) thread quantity per inch projection unc left internal (includes thru thread) thread series
00-908-1580
Handwheel
0.999" inside diameter 6.875" outside diameter
00-908-1631
Spring Holder
00-908-1802
Angle Bracket
Used on fwd support,afterburner shroud. items furnished as accessories: 2 rivet p/n MS20427M3-4; nutplate p/n NAS686C3 angle
00-908-1809
Angle Bracket
Angle
00-908-1814
Access Cover
0.195" hole diameter 1.170" outside diameter
00-908-1868
Mounting Bracket
00-908-2403
Cushioning Pad
00-908-2536
Helical Compression Spr Retainer
Irregular
00-908-2554
Spring Tension Clip
0.066" hole diameter 0.012" material thickness
00-908-2630
Helical Compression Spr Retainer
00-908-2652
Access Cover
Used on 2915-00-908-2686 fuel control,main,turbine engine.
00-908-2803
Manual Control Handle
Material:iron, malleable, pearlitccasting, grade 70003 or 60004, astm-A220; optional material:iron, modular graphitic (ductile iron) , grade 80-55-06; heat treatment:harden indicated surfaces iaw spec mil-s-12515, hardened depth 0.015 in.min.hardness ra 74.5 min; final protective finish:1.4.3.1 of mil-std-171, 0.0010 in.thick
00-908-2823
Access Cover
0.138" hole diameter
00-908-2828
Access Cover
0.176" hole diameter 4.000" outside diameter anodize surface treated
00-908-2831
Access Cover
0.231" hole diameter primer zinc chromate surface treated
00-908-2839
Access Cover
0.264" hole diameter oxide film surface treated
00-908-3220
Corner Brace
0.120" material thickness angle
00-908-3231
Angle Bracket
Counterbore inside leg a 0.438 in. dia. 0.040 in. deepradius ends 0.085 in. angle
00-908-3246
Synchro Clamp
0.187" hole diameter
00-908-3249
Mounting Bracket
Used on missile bullpup.
