00-007-4279
Retaining Clip
00-007-4832
Mounting Bracket
Msteel, qq-s-698, 10.000 in.formed lg, 1.000 in. w, 0.125 in. thk, 1 end with leg 3.000 in. lg, 2 holes 0.234 in. dia, with slot 0.250 in. w locate 7.880 in. from leg, opposite end with 15 deg angle located 1 in. from end
00-007-4835
Mounting Bracket
Aaluminum fed-qq-a-250/7 comp 5086 temper H32, enamel surface finish spec tt-e-529 class a, welded construction, 23.250 in.o/a lg approx, 14.000 in. o/a w, 10, 750 in. o/a h, 0.607 in. 4 mounting holes
00-007-4847
Retaining Strap
10.750" overall length 1.500" overall width 0.125" material thickness straight arch
00-007-4848
Double Angle Bracket
Used on m557 conf.
00-007-5515
Butt Hinge Leaf
00-007-5808
Protective Dust And Moisture Cap
00-007-5822
Mounting Bracket
00-007-5901
Access Cover
0.252" hole diameter anodize surface treated
00-007-5902
Access General Purpose Door
00-007-5912
Access Door Hinge
00-007-5931
Access Door Hinge
00-007-6040
Loop Clamp
0.375" overall width 0.050" material thickness single loop
00-007-6121
Drawer Extension Slide Section
Anodize surface treated
00-007-6122
Grooved Clamp Coupling Ferrule
0.750" overall length
00-007-6136
Drawer Extension Slide
Passivate surface treated
00-007-6195
Loop Clamp
0.750" overall width 0.042" material thickness cadmium band or zinc band surface treated single loop
00-007-6216
Loop Clamp
0.625" overall width 0.032" material thickness tightening device self-locking nut right hand clamp & bracket
00-007-6341
Angle Bracket
Passivate surface treated angle
00-007-6342
Door Handle
5.125" overall length integral shaft one flat on end only chromate shaft surface treated l
00-007-6343
Butt Hinge
0.060" material thickness butt
00-007-6548
Butt Hinge Leaf
00-007-7578
Dust And Moisture Seal Boot
2.625" overall length 1.375" overall width 0.050" material thickness thru-hole
00-007-7784
Angle Bracket
00-007-8124
Access Cover
Tin surface treated
00-007-8773
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
00-007-8781
Support Hook
0.0359" material thickness
00-007-8787
Protective Dust And Moisture Cap
00-007-8930
Retaining Strap
3.630" overall length 1.320" overall width 0.063" material thickness copper alloy surface treated half arch
00-007-9331
Blank Panel
2.687" overall width 0.188" material thickness anodize surface treated blank, w/access door
00-007-9361
Threaded Spacing Standoff
Countersink 79.0 deg min, 85.0 deg max to 0.140 in. dia both ends chromate surface treated internally threaded full length
00-007-9362
Threaded Spacing Standoff
Left internal
00-007-9363
Angle Bracket
00-007-9442
Angle Bracket
Primer surface treated angle
00-007-9793
Threaded Spacing Standoff
Steel, corrosion resisting, passivate, projection left internal
00-007-9805
Rim Latch
Used on w/s: aircraft, tomcat f-14. latch assembly, shear; load 15, 000 lb. max 0.498 in. dia.; pin 4.10 in. length cadmium surface treated
00-007-9809
Butt Hinge Leaf
5.875" overall length 0.250" material thickness butt blank
00-007-9854
Angle Bracket
Clinch nut located on inside of second leg of top hole chromate surface treated angle
00-007-9856
Angle Bracket
Clinch nut located on inside of second leg of bottom hole chromate surface treated angle
00-007-9870
Butt Hinge
0.134" material thickness leaf offset butt w/door leaf offset
00-008-0650
Threaded Spacing Standoff
Left internal
00-008-1676
Webbing Strap
00-008-2172
Synchro Clamp
2a thread class unc thread series
