00-863-4270
Angle Bracket
Offset angle
00-863-4303
Threaded Spacing Standoff
Stud, extension
00-863-4984
Butt Hinge
17.830" overall length
00-863-5248
Angle Bracket
Angle
00-863-5252
Manual Control Lever
Used on acft model c130. steel, o/a lg 10.500 in. w/two mtg holes
00-863-5753
Access Cover
Used on uh-1 series helicopters
00-863-5897
Spring Tension Clip
0.062" material thickness chromium surface treated
00-863-6533
Double Angle Bracket
Double angle
00-863-7178
Loop Clamp
1.270" overall width stud turnlock cadmium band surface treated
00-863-7334
Access Cover
20.080" inside diameter 23.860" outside diameter
00-863-7794
Rim Latch
Used on m110 howitzer family. 2.938 in.lg, 0.875 in.h, at mtg holes, 2.125 in.lg at mtg hole, bevel 0.875 in.lg, 0.375 in.deep; hole diameter:0.500 in.; hole spacing:0.813 in.from one end; MATT2AMDSTA000 cadmium case surface treated
00-863-8149
Spring Tension Clip
0.007" material thickness
00-863-8743
Threaded Spacing Standoff
Left internal
00-863-9327
Synchro Clamp
0.140" hole diameter passivate surface treated
00-863-9424
Access Cover
0.260" hole diameter
00-864-0324
Lock-release Lever
Used on m110 howitzer family. X0.375 dia x 4.500 lg rod; 0.375-2unf-2a x 1.000 lg one end; other end necked out to cylinder 1.750 lg x 0.750outside dia; 0.380 dia clinder bore; tongue 0.750 lg x 0.625 w x 0.188 thk centered on cylinder 60 deg from rod centerline phosphate surface treated
00-864-0332
Retaining Strap
2.740" overall length 1.000" overall width 0.120" material thickness phosphate surface treated curved arch
00-864-0652
Mounting Plate
Used on misc electronic parts.
00-864-0994
Detent Plunger
00-864-1943
Angle Bracket
Angle
00-864-1952
Angle Bracket
00-864-2912
Access Cover
0.280" hole diameter 1.250 dia hole in center
00-864-3121
Loop Clamp
0.625" overall width 0.031" material thickness cadmium band surface treated single loop
00-864-3416
Helical Compression Spring Seat
0.1855" bore diameter one hole 0.061/0.062 in. dia in 1st step, plugged w/straight pin 0.070 in. lg x 0.063 in. dia; matl-steel qq-w-461, comp 1010; not casehardened seat
00-864-3470
Helical Compression Spring Seat
0.2000" bore diameter both ends c/bored, 0.395/0.405 in. dia; not casehardened
00-864-3495
Synchro Clamp
2b thread class unc thread series
00-864-3866
Helical Compression Spr Retainer
Counterbored 0.658 in. by 0.360 in. parallel
00-864-4601
Threaded Spacing Standoff
Headless left internal
00-864-4674
Threaded Spacing Standoff
Headless left internal
00-864-4675
Threaded Spacing Standoff
Headless left internal
00-864-4685
Protective Dust And Moi Cap-plug
00-864-4686
Angle Bracket
Angle
00-864-4687
Angle Bracket
Angle
00-864-4708
Angle Bracket
Angle
00-864-4724
Loop Clamp
0.375" overall width 0.032" material thickness passivate band surface treated center mount
00-864-4752
Threaded Spacing Standoff
Headless left internal
00-864-5054
Spring Tension Clip
0.016" material thickness cadmium surface treated
00-864-5065
Spring Tension Clip
0.140" hole diameter 0.032" material thickness cadmium surface treated
00-864-5069
Catch Strike
0.500" overall length 0.312" overall width 0.063" material thickness passivate surface treated
00-864-5134
Threaded Spacing Standoff
2b left internal (includes thru thread) 2a right external thread class 0.312" right external thread length 32 right external thread quantity per inch nut end thd anodize standoff surface treated flanged with left internal thread unc left internal (includes thru thread) thread series
00-864-5135
Threaded Spacing Standoff
2b left internal (includes thru thread) 2a right external thread class 0.312" right external thread length 40 left internal (includes thru thread) thread quantity per inch passivate standoff surface treated projection unc left internal (includes thru thread) thread series
00-864-5157
Spring Tension Clip
0.012" material thickness cadmium surface treated
