00-856-5944
Electronic Equipmen Hardware Kit
Used on instalaltion kit/component.
00-856-5981
Lock-release Lever
For r.h. operation
00-856-6140
Manual Control Lever
00-856-6412
Angle Bracket
Angle
00-856-6417
Mounting Bracket
Used on aircraft engine.
00-856-6418
Angle Bracket
00-856-6420
Angle Bracket
Angle
00-856-6421
Angle Bracket
Angle
00-856-6609
Spring Tension Clip
0.090" hole diameter 0.012" material thickness color golden yellow cadmium surface treated
00-856-6680
Rod End Clevis
3a rod connection thread class right-hand rod connection 1.730" rod connection thread length 0.256" hole diameter 1.250" overall width cadmium surface treated clevis unf rod connection thread series
00-856-7298
Access Cover
0.186" hole diameter 675 electrical access nas 517-3-4 4 places
00-856-7529
Electronic Equipmen Hardware Kit
00-856-8009
Door Handle
2a thread class 6.688" overall length enamel surface treated u unf thread series
00-856-8991
Angle Bracket
00-856-9078
Angle Bracket
Used on w/s: engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); aircraft, c-18a, ec-18b; engine, aircraft, tf-33-p-7 (c-141a/b); engine, aircraft tf33-p-3/5/9 (c/ec-135, b52h); joint stars target radar system; aircraft, stratofortress b-52; aircraft, stratolifter c-135; aircraft, hercules c-130; aircraft, awacs, e-3a. passivate surface treated angle
00-856-9089
Double Angle Bracket
Oxide film surface treated
00-856-9505
Access Cover
0.187" hole diameter anodize surface treated
00-856-9868
Mounting Bracket
00-857-0533
Electronic Equipmen Hardware Kit
00-857-2213
Spring Tension Clip
0.071" hole diameter 0.010" material thickness silver surface treated
00-857-2351
Clamping Catch
0.156" hole diameter nickel surface treated lever
00-857-2683
Spring Tension Clip
0.162" hole diameter 0.028" material thickness cadmium surface treated
00-857-2684
Spring Tension Clip
0.093" hole diameter 0.016" material thickness cadmium surface treated
00-857-2685
Spring Tension Clip
0.093" hole diameter 0.012" material thickness cadmium surface treated
00-857-2712
Rigid Caster
Rigid
00-857-2771
Angle Bracket
00-857-2790
Angle Bracket
When viewing second leg, the hole to the right side is actually a slot witch extends to the lower edge of the bracket primer surface treated angle
00-857-2796
Threaded Spacing Standoff
Has longitudinal hole drilled through 0.250 in. dia left internal
00-857-2798
Angle Bracket
Enamel surface treated angle
00-857-2810
Retaining Window Plate
Matl hardness rating-not rated; raised surface feature-not included
00-857-2821
Mounting Bracket
Used on gun,anti-aircraft,sp,40mm m42/ m42a1.
00-857-2880
Nut And Bolt Locking Plate
Radius
00-857-2887
Nut And Bolt Locking Plate
Straight
00-857-3276
Leakproof Seal Plug
Used on oh-6 series helicopter.
00-857-3283
Access Cover
0.216" hole diameter
00-857-3297
Catch Strike
2.320" overall length 0.600" overall width 0.063" material thickness
00-857-3299
Protective Dust And Moistur Plug
Used on ship, ohio class ssn (trident); sturgeon class ssn (637); ventilation; submarine atmosphere control and compressed air/gas; hayes class t-ag 195; fans.
00-857-3613
Bail Handle
Used on w/s: iff aims mk xii; aircraft, stratofortress b-52. 0.193" hole diameter furnished w/8 screws zinc surface treated delta open
00-857-4412
Angle Bracket
Cadmium surface treated angle
00-857-4414
Angle Bracket
First leg angle in degrees 88.0 min. 92.0 max. cadmium surface treated angle
00-857-5525
Loop Clamp
0.500" overall width 0.030" material thickness passivate band surface treated single loop
00-857-5640
Protective Dust And Moistur Plug
1a thread class
00-857-5643
Protective Dust And Moistur Plug
1a thread class
00-857-5680
Loop Clamp
0.500" overall width 0.040" material thickness multiple loop
00-857-5907
Bumper
3.000" overall width steel plate insert 17.500 in. lg, 1.500 in. w, 0.150 in. thk
00-857-6104
Loop Clamp
0.375" overall width 0.028" material thickness passivate band surface treated offset mount
00-857-6175
Threaded Spacing Standoff
Left internal
00-857-6186
Angle Bracket
Cadmium surface treated angle
