00-799-0973
Loop Clamp
0.750" overall width 0.062" material thickness cadmium band or zinc band surface treated multiple loop
00-799-1121
Threaded Spacing Standoff
Projection one end left
00-799-1154
Access Door Hinge
Alum alloy, 7075-T6
00-799-1323
Clamping Catch
0.118" hole diameter one lightening hole 0.562 in. dia, one lightening hole 0.625 in. dia cadmium surface treated lever
00-799-1326
Rod End Clevis
0.503" hole diameter passivate surface treated
00-799-1408
Mounting Plate
00-799-1590
Access Cover
0.562" hole diameter 11.062" outside diameter
00-799-1827
Loop Clamp
0.505" overall width 0.095" material thickness single loop
00-799-2218
Detent Plunger
Spring length 2.083
00-799-2294
Angle Bracket
Angle
00-799-2373
Double Angle Bracket
00-799-2418
Spring Tension Clip
00-799-2421
Spring Tension Clip
00-799-2813
Turnbuckle Body
2b body thread class cadmium surface treated unf body thread series
00-799-3349
Rod End Connector
Shoulder on shaft 0.682 in. dia., 0.180 in. long, 0.970 in. from end of shaft phosphate surface treated connector
00-799-3772
Loop Clamp
0.360" overall width 0.032" material thickness phosphate band surface treated single loop
00-799-3777
Retaining Strap
5.076" overall length 0.530" overall width 0.057" material thickness cushioning material reinforced w/wire
00-799-3782
Turnbuckle Body
Used on j79, j85, t58, t64 engines. 2b rod connection thread class left-hand stud end 2.310" rod connection thread length end with letter l indicates left hand thread, see t.o. 00-25-113-J79 series for applications silver surface treated unef body thread series
00-799-5213
Catch Strike
2.750" overall length 0.937" overall width
00-799-5241
Angle Bracket
Second leg lower rh corner cut away 1.550 w x 2.400 deep enamel surface treated angle
00-799-5373
Bumper
1.500" overall length 0.880" overall width
00-799-5575
Bumper
0.344" hole diameter
00-799-5723
Retaining Strap
9.876" overall length 1.250" overall width 0.125" material thickness cadmium surface treated tapered arch
00-799-5801
Double Angle Bracket
Double angle
00-799-5897
Retaining Strap
5.250" overall length 1.750" overall width 0.1196" material thickness 29/32 in. dia hole located in center of ardh tapered arch
00-799-5927
Manual Control Handle
00-799-6142
Threaded Spacing Standoff
Left internal
00-799-6165
Synchro Clamp
00-799-6306
Clamping Catch
0.130" hole diameter special
00-799-6375
Access Cover
0.190" hole diameter
00-799-6388
Bumper
6.000" overall length 1.750" overall width
00-799-6467
Retaining Strap
Used on MHU-7M. anodized finish
00-799-6498
Retaining Band
Long leg overlapped 1.240 in. at end
00-799-6507
Retaining Band
00-799-6541
Retaining Strap
1.240" overall length 1.000" overall width 0.125" material thickness cadmium surface treated
00-799-6571
Access Cover
0.215" hole diameter
00-799-6574
Access Cover
0.220" hole diameter
00-799-6592
Access Cover
0.205" hole diameter
00-799-6633
Helical Compression Spring Seat
Not casehardened; 0.250-28 unf-3b thd bore seat
00-799-6664
Rod End Clevis
2a rod connection thread class right-hand rod connection 3.500" rod connection thread length 0.500" hole diameter 1.375" overall width cadmium surface treated clevis unc rod connection thread series
00-799-6750
Hand Crank
3.813" overall length
00-799-6778
Protective Dust And Moisture Cap
Chain attached cadmium surface treated
00-799-6806
Mounting Bracket
00-799-6953
Manual Control Lever
Used on aircraft model c141a. console flap control, spring loaded
00-799-6965
Synchro Clamp
0.128" hole diameter
00-799-6968
Bumper
0.750" overall length 0.120" overall width
00-799-7163
Nut And Bolt Retainer
1.280" overall length 0.560" overall width 0.040" material thickness chromate surface treated anchor
00-799-7686
Retaining Strap
2.500" overall length 0.500" overall width 0.060" material thickness small arch 0.120 in. radius multiple arch
