00-728-8255
Webbing Strap
00-728-8283
Straight Headless Rod
Pin, hinge cadmium surface treated
00-728-9395
Access Door Hinge
3.500" overall length left hand
00-728-9405
Loop Clamp
0.500" overall width 0.051" material thickness anodize band surface treated single loop
00-728-9748
Mounting Bracket
Used on spacer,reentry vehicle on lgm-30 missile. cres, qq-s-766, class 301 or 302, 1/4 hard, 0.094 in thk, 4.700 in. from center hole to center hole, two ends bent 8 degrees, 2 ea NAS1031C3 nut plates, 2 ea 0.440 hole lg, 0.200 in. wide
00-729-4419
Door Handle
7.156" overall length lock clamp cut from escutcheon plate cadmium surface treated u
00-729-6254
Cushioning Pad
00-729-6258
Cushioning Pad
00-729-6262
Cushioning Pad
00-729-6402
Door Handle
5.438" overall length w/sg head setscrew 0.250-20 unc in head cadmium surface treated straight
00-729-6763
Synchro Clamp
Used on w/s:support equipment, b-1 aircraft; stream (std. tensioned replenishment at sea method); missile, air-to-air, sparrow (aim 7); radio terminal set an/srq-4; radar set, an/tpn-18; missile, air intercept, sidewinder (aim-9); close in weapon system (ciws-phalanx); sonar signal processing sys, an/sqq-28(v); aircraft, (ac-130h, mc-130h, ec-130e, hhc-130). 0.125" hole diameter
00-729-7086
Cushioning Pad
00-729-8572
Protective Dust And Moisture Cap
00-729-8706
Dust And Moisture Seal Boot
0.062" material thickness thru-hole, expandable
00-729-9521
Loop Clamp
0.500" overall width 0.051" material thickness rectangular
00-729-9897
Loop Clamp
0.500" overall width 0.047" material thickness passivate band surface treated multiple loop
00-730-0895
Protective Dust And Moistur Plug
00-730-1029
Mounting Bracket
Contains 2 holes, irregularly-shaped bracket
00-730-2145
Access Cover
Used on w/s: helicopter, seahawk, h-60; helicopter, carrier based asw, sh-60f; fms-build frigates class ships; helicopter, search and rescue, hh-60h; helicopter, uscg search and rescue, hh-60j; helicopter, advance attack, ah-1w; aircraft (ac-130h, mc-130h, ec-130e, hc-130); helicopter, mh-53e; jet aircraft start unit; engine, aircraft t-700.
00-730-3955
Synchro Clamp
0.144" hole diameter phosphate surface treated
00-730-4049
Spring Tension Clip
Cushion:not included
00-730-4482
Access Cover
0.140" hole diameter color blue
00-730-4973
Angle Bracket
Angle
00-730-5140
Butt Hinge Leaf
29.600" overall length 0.064" material thickness butt parallel holes
00-730-5163
Loop Clamp
0.875" overall width single loop
00-730-5166
Rod End Clevis
0.687" hole diameter no.63 finish on fork arms phosphate surface treated clevis
00-730-5181
Rod End Clevis
0.687" hole diameter 1.312" overall width fork arms tapered to 80 deg incl angle point, no. 63 finish on fork arms phosphate surface treated
00-730-5183
Retaining Clip
Pin
00-730-5203
Access Door Hinge
00-730-5204
Access Door Hinge
00-730-5207
Access Door Hinge
00-730-5251
Butt Hinge Leaf
00-730-5254
Butt Hinge Leaf
00-730-5362
Manual Control Lever
Steel, mil-s-18728
00-730-5377
Manual Control Lever
Used on gun sp ft 40mm m42a1.
00-730-5378
Manual Control Lever
Used on 1015-00-322-9752.
00-730-5773
Retaining Strap
Nickel surface treated
00-730-5903
Helical Compression Spring Seat
Nickel surface treated
00-730-6197
Spring Tension Clip
0.068" hole diameter 0.010" material thickness oxide surface treated
00-730-6270
Bow Handle
9.375" overall length paint surface treated unf thread series
00-730-6633
Lock-release Lever
Used on pccn k742.
00-730-7019
Manual Control Lever
Used on uh-1 series helicopters. saluminum alloy, qq-AQ362, 0.469 in., 0.499 in. thickness, 2.500 in. w to pivot hole, 1.500 in. lg from pivot hole, to handle, 0.190 in. , 0.196 in. end hole, 0.3120 in. , 0.3130 in. pivothole
00-730-7047
Plug Button
Nickel surface treated standard
00-730-7468
Mounting Plate
Used on 20mm gun.
00-730-7517
Lever Bracket
00-730-7519
Lever Bracket
00-730-8051
Rigid Caster
Rigid
00-730-8330
Grooved Clamp Coupling Ferrule
0.060" overall length
