00-623-0431
Bumper
7.062" overall length 3.625" overall width
00-623-0587
Protective Dust And Moistur Plug
00-623-0635
Retaining Strap
Any acceptable overall length any acceptable overall width any acceptable material thickness straight arch
00-623-0675
Retaining Band
00-623-0676
Retaining Band
00-623-1014
Spring Tension Clip
00-623-1180
Threaded Spacing Standoff
Passivate surface treated internally threaded full length
00-623-1217
Retaining Band
00-623-1283
Spring Holder
00-623-1725
Expansion Plug
0.037" material thickness zinc surface treated err default
00-623-2637
Helical Compression Spr Retainer
00-623-2947
Rim Latch Set
Release bar, not included; strike keeper, not furnished; escutcheon, not furnished
00-623-3037
Spring Holder
00-623-3125
Protective Dust And Moisture Cap
00-623-3217
Key Blank
Brass or nickel silver
00-623-3289
Buckle
3.187" overall length 1.625" overall width cadmium surface treated
00-623-3313
Threaded Spacing Standoff
Silver surface treated
00-623-4043
Access Door Hinge
00-623-4725
Access General Purpose Door
00-623-4800
Strap Fastener Loop
Vinyl coated cadmium or cadmium surface treated hook
00-623-4808
Angle Bracket
00-623-4820
Angle Bracket
00-623-4821
Angle Bracket
00-623-5403
Protective Dust And Moisture Cap
00-623-5419
Butt Hinge Leaf
4.470" overall length 0.060" material thickness butt blank
00-623-5730
Angle Bracket
00-623-5732
Angle Bracket
00-623-5740
Angle Bracket
00-623-5781
Angle Bracket
00-623-6147
Angle Bracket
00-623-6235
Synchro Clamp
3b thread class 0.112" hole diameter lock leg 0.046 in. thk; lock leg concave curved w/outside radius 0.494 in. min 0.499 in. max; mtg leg chamfered both corners 0.188 in. by 38.0 deg unc thread series
00-623-6557
Manual Control Lever
Used on aircraft model c130. aluminum alloy, qq-a-601
00-623-6562
Butt Hinge Leaf
131.490" overall length 0.115" material thickness
00-623-6982
Resilient General Purpose Mount
Anodize surface treated round spring compression four-hole flange
00-623-7092
Strap Fastener Loop
0.265" hole diameter 1.500" overall length phosphate zinc surface treated flat
00-623-7180
Locking Stay
0.500" overall width 0.063" material thickness composed of 2 stays, 2 solid rivets, 2 flat washers, 1 helical extension spring, 1 catch strike, 1 pin friction type
00-623-7875
Retaining Band
0.264" hole diameter
00-623-7982
Synchro Clamp
0.812" hole diameter chromate surface treated
00-623-8151
Flush Catch
Matl:guide block alum. alloy, catch cres steel
00-623-8156
Flush Catch
Used on w/s: aircraft, t-2. passivate surface treated flush lever actuator
00-623-8209
Protective Dust And Moistur Plug
00-624-0081
Drawer Extension Slide Section
00-624-0674
Dust And Moisture Seal Boot
00-624-0697
Angle Bracket
Angle
00-624-0698
Angle Bracket
Angle
