00-613-7295
Angle Bracket
Angle
00-613-7300
Angle Bracket
00-613-7301
Angle Bracket
Offset angle
00-613-7302
Angle Bracket
Angle
00-613-7807
Spring Tension Clip
0.018" material thickness cadmium surface treated
00-613-7808
Spring Tension Clip
0.018" material thickness cadmium surface treated
00-613-8253
Threaded Spacing Standoff
Left internal
00-613-8295
Flush Catch
Matl:bracket steel, lever steel, pin steel, spring steel flush lever actuator
00-613-8360
Mounting Bracket
Used on j-57 aircraft engine.
00-613-8361
Mounting Bracket
Used on j-57 aircraft engine.
00-613-9024
Loop Clamp
0.375" overall width 0.032" material thickness cadmium band surface treated offset mount
00-613-9364
Protective Dust And Moistur Plug
2 rivets
00-613-9722
Helical Compression Spr Retainer
W/pin
00-613-9866
Protective Dust And Moisture Cap
2a thread class furnished w/gasket, used for @freon @12
00-614-0005
Retaining Strap
Used on an/alq-101 peculiar. 2.812" overall length 0.375" overall width 0.029" material thickness cadmium plated, qq-p-416 type 2 class 2 surface treated straight arch
00-614-0018
Double Angle Bracket
Cadmium surface treated double angle
00-614-0993
Mounting Bracket
Consists of 2 flat brackets
00-614-1061
Loop Clamp
1.872" overall width 0.352" material thickness four cadmium plated type u drive screws no. 4 0.188
00-614-1272
Spring Holder
00-614-1536
Handle Grip
1.000" inside diameter 5.000" overall length 1.625" outside diameter cylindrical
00-614-1543
Mounting Bracket
00-614-1695
Loop Clamp
0.625" overall width 0.020" material thickness t-bolt
00-614-2138
Mounting Plate
Used on e/i unknown. protective plate
00-614-2372
Clamp Bolt Assembly
00-614-2507
Mounting Bracket
Consists of 2 angle brackets attached to each other, contains 4 separate legs, 1 leg contains 1 mounting hole
00-614-2686
Mounting Bracket
Irregularly-shaped bracket used to mount an ignition exciter isolater, p/n 403508
00-614-2810
Spring Tension Clip
00-614-2917
Spring Tension Clip
0.020" material thickness
00-614-3012
Angle Bracket
Angle
00-614-3037
Angle Bracket
Angle
00-614-3058
Double Angle Bracket
Double angle
00-614-3690
Spring Tension Clip
0.128" hole diameter 0.016" material thickness cadmium surface treated
00-614-3697
Retaining Strap
00-614-5070
Solid Plain Disk
Passivate surface treated
00-614-5880
Rod End Connector
2b rod connection thread class right-hand rod connection 0.375" rod connection thread length anodize surface treated connector unf rod connection thread series
00-614-6083
Butt Hinge Leaf
40.480" overall length 0.095" material thickness butt parallel holes
00-614-6084
Butt Hinge Leaf
40.480" overall length butt parallel holes
00-614-6140
Butt Hinge Leaf
00-614-6696
Helical Compression Spring Seat
0.4380" bore diameter
00-614-6763
Expansion Plug
00-614-6820
Manual Control Handle
00-614-6977
Mounting Bracket
Used on model m88 series tanks. an assy welded per spec mil-std-1261 class 1; consists of one plate p/n 11671034-1, one plate p/n 11671033-1, one plate p/n 11671035-1, one plate p/n 11671036-1; length 10.480 ins min
00-614-6978
Mounting Bracket
Item consist of: plate p/n 11671033-2 1ea; plate p/n 11671036-1 1ea; length min 12.480 max 12.520; height min 10.350 max 10.410; use on end ITEM2350-00-122-6826for further information see drawing 19207-11671083
00-614-7006
Double Angle Bracket
00-614-7020
Mounting Bracket
Irregularly-shaped bracket, 1 leg contains 4 holes
00-614-7021
Double Angle Bracket
Cadmium surface treated
00-614-7032
Mounting Bracket
Multi-angled, irregularly-shaped bracket
