00-602-5042
Access Cover
0.396" hole diameter 1.638" outside diameter enamel surface treated
00-602-5044
Access Cover
0.205" hole diameter enamel surface treated
00-602-5045
Access Cover
5.250" outside diameter zinc surface treated
00-602-5160
Mounting Bracket
Used on ah-1 series helicopter. aluminum alloy, qq-a-25016, temper T351, composition 2024, 3.000 in. LG1.500 in. w, 1.369 in. min. 1.385 in. max
00-602-5520
Nut And Bolt Retainer
0.630" overall length 0.392" overall width 0.009" material thickness cadmium surface treated barrel
00-602-5521
Nut And Bolt Retainer
0.840" overall length 0.642" overall width 0.012" material thickness cadmium surface treated barrel
00-602-5522
Nut And Bolt Retainer
1.002" overall length 0.785" overall width 0.012" material thickness cadmium surface treated barrel
00-602-6976
Quick Release Plunger
1.000" thread length 18 thread quantity per inch unc thread series
00-602-8595
Mounting Bracket
Used on j-57 aircraft engine.
00-602-8640
Mounting Bracket
Used on j-57 aircraft engine.
00-602-8642
Angle Bracket
Angle
00-602-8644
Angle Bracket
Cadmium surface treated angle
00-602-8646
Mounting Bracket
Steel per ams 6350 or 6355, cadmium plated per ams 2400, bracket is flat, 0.046 in. min to 0.054 in. max material thickness, 0.670 in. min to 0.690 in. max width, 1.810 in. min to 1.850 in. max length, 0.406 in. min to 0.469 in. max end radius on both ends, contains 2 holes, 0.276 in. min to 0.286 in. max hole diameter, 0.330 in. min to 0.350 in. max distance from hole center to edge along length both ends, 0.340 in. between hole centers
00-602-8648
Mounting Bracket
Steel per ams 6350 or ams 6355, cadmium plate per ams 2400, bracket is flat, 0.047 in. min to 0.053 in. max material thickness, contains 1 hole with 0.214 in. min to 0.224 in. max diameter, contains 2 holes with 0.339 in. min to 0.349 in. max diameter, 0.952 in. between hole centers
00-602-8658
Angle Bracket
Second leg contains five irregularly sized cadmium surface treated angle
00-602-8659
Angle Bracket
Second leg two holes 0.276 in. min 0.286 in. max dia cadmium surface treated angle
00-602-8662
Double Angle Bracket
1st leg contains a self-locking nut double angle
00-602-8683
Mounting Bracket
00-602-8878
Protective Dust And Moisture Cap
00-602-9077
Bumper
Machine screw
00-602-9226
Protective Dust And Moisture Cap
1b thread class
00-603-0322
Solid Plain Disk
00-603-0323
Solid Plain Disk
00-603-0662
Protective Dust And Moisture Cap
00-603-0664
Protective Dust And Moisture Cap
3b thread class anodize surface treated
00-603-1229
Solid Plain Disk
00-603-1341
Retaining Strap
00-603-1360
Protective Dust And Moi Cap-plug
00-603-1533
Helical Compression Spring Seat
1.1870" bore diameter
00-603-1617
Angle Bracket
Angle
00-603-1630
Bail Handle
0.199" hole diameter rectangular open
00-603-1633
Bail Handle
0.199" hole diameter rectangular open
00-603-1721
Blank Panel
12.940" overall width blank, plain design
00-603-1725
Loop Clamp
0.500" overall width 0.032" material thickness cadmium band or zinc band surface treated multiple loop
00-603-2289
Grooved Headless Rod
Cres ty 440c, 33.960 in.porm 0.030 in.lg, chamfered both ends 0.030 in.lg, 45.0 deg angle, 0.094 in.undercut radius 0.274 in.undercut dia located 0.150 in.one end, 32 microinch finish outside dia;
00-603-2297
Protective Dust And Moistur Plug
00-603-2492
Access Cover
Used on misc gun parts.
00-603-3482
Resilient General Purpose Mount
Round int. threaded flanges
00-603-4092
Rod End Connector
3a rod connection thread class right-hand rod connection 0.640" rod connection thread length passivate surface treated unjf rod connection thread series
00-603-4560
Solid Plain Disk
Two holes 0.094 in. dia, one hole 0.250 in. dia
00-603-5884
Loop Clamp
Used on c-7a acft. matl 2024-T3
00-603-5909
Resilient General Purpose Mount
Round w/flange threaded stud
00-603-6042
Mounting Bracket
Stainless steel per ams 5504, flat bracket, 0.045 in. min to 0.055 in. max material thickness, 3.160 in. length at bottom, tapering up to 2.000 in. length at top, 1.950 in. width, contains 2 holes at top, 0.276 in. min to 0.286 in. max hole diameter, 1.400 in. between hole centers, contains 5 holes at bottom, 0.276 in. min to 0.286 in. max diameter for 2 holes, 0.339 in. min to 0.349 in. max diameter for 3 holes
00-603-6547
Threaded Spacing Standoff
Left internal
00-603-6753
Synchro Clamp
00-603-8375
Threaded Spacing Standoff
0.250" right external thread length 40 left internal (includes thru thread) thread quantity per inch drilled hole 0.113 in. dia. projection one end left internal thread unf left internal (includes thru thread) thread series
00-603-9111
Helical Compression Spring Seat
Passivate surface treated seat
00-603-9159
Loop Clamp
0.540" overall width 0.050" material thickness single loop
