00-536-8660
Cable Retractor
16.94 in. lg.
00-536-9085
Line Supporting Strap
Bolt type
00-536-9472
Double Angle Bracket
Adjacent angles
00-536-9549
Butt Hinge Leaf
50.578" overall length 0.050" material thickness
00-536-9556
Butt Hinge
54.860" overall length 0.080" material thickness
00-536-9560
Butt Hinge Leaf
41.170" overall length 0.217" material thickness cuts on lower legs seven places holes on pin 0.096 in. dia to 0.101 in.dia. holes in second
00-536-9636
Retaining Strap
3.356" overall length 0.406" overall width 0.047" material thickness cadmium surface treated curved arch
00-536-9933
Synchro Clamp
0.715" hole diameter zinc surface treated
00-536-9945
Loop Clamp
0.484" overall width 0.046" material thickness offset mount
00-537-1365
Access Cover
3.375" outside diameter
00-537-2102
Retaining Strap
2.931" overall length 0.064" overall width 0.064" material thickness wedge included saddle arch
00-537-2613
Hand Crank
Used on 5840-00-505-0921,radar set,an/fps-6. 1.750" inside diameter
00-537-2982
Threaded Spacing Standoff
Left internal thread
00-537-3041
Stand Base
Cadmium surface treated
00-537-3606
Snap Hook
0.750" inside diameter 3.000" overall length
00-537-4168
Loop Clamp
0.688" overall width 0.016" material thickness single loop
00-537-4768
Resilient General Purpose Mount
0.257" inside diameter additional surface treatment: golden iridite cadmium surface treated round w/bushing four-hole flange
00-537-7346
Door Closer
Holding angle in deg:120.0 degs
00-537-7356
Retaining Strap
5.656" overall length 1.625" overall width 0.250" material thickness zinc surface treated
00-537-8626
Threaded Spacing Standoff
Stud, extension
00-537-9364
Mounting Plate
00-538-0350
Access Cover
0.188" hole diameter w/two mtg holes each end, located in flange, bent 90.0 deg to surface of cover, two each mtg screws
00-538-0353
Access Cover
0.190" hole diameter with two each mtg screws
00-538-0464
Threaded Spacing Standoff
Left internal
00-538-0994
Threaded Spacing Standoff
2b left internal (includes thru thread) 2a right external thread class right-hand left internal (includes thru thread) 0.312" left internal (includes thru thread) 0.516" right external thread length 20 left internal (includes thru thread) thread quantity per inch flanged with left internal thread unf left internal (includes thru thread) thread series
00-538-1384
Access Cover
0.163" hole diameter furnished with gasket, mounting screws zinc surface treated
00-538-1403
Lock-release Lever
00-538-3908
Rod End Clevis
2b rod connection thread class right-hand rod connection 0.875" rod connection thread length 0.252" hole diameter 0.865" overall width clevis unf rod connection thread series
00-538-4315
Straight Headless Rod
W/groove both ends 1/4 in. w by 1/4 in. deep, w/thd hole both ends 3/4 in. 16 unf, 2b thd by 1 in. deep
00-538-4380
Synchro Clamp
0.169" hole diameter phosphate surface treated
00-538-5762
Dust And Moisture Seal Boot
Closed end
00-538-5802
Access Cover
0.218" hole diameter
00-538-5897
Rod End Clevis
00-538-6791
Glazier Point
00-538-6930
Spring Tension Clip
0.090" hole diameter 0.009" material thickness cadmium surface treated
00-538-7097
Bail Handle
2a thread class anodize handle surface treated unf thread series
00-538-7133
Drawer Extension Slide
00-538-7135
Drawer Extension Slide
00-538-7166
Threaded Spacing Standoff
Passivate surface treated internally threaded full length
00-538-7213
Loop Clamp
0.500" overall width 0.040" material thickness passivate band surface treated offset mount
00-538-7215
Loop Clamp
0.500" overall width 0.040" material thickness passivate band surface treated offset mount
00-538-7245
Loop Clamp
0.500" overall width 0.040" material thickness passivate band surface treated
00-538-7775
Angle Bracket
Angle
00-538-7804
Clamping Catch
Passivate surface treated
00-538-7805
Pawl Fastener
Cadmium surface treated t-handle
00-538-9162
Loop Clamp
0.484" overall width 0.026" material thickness offset mount
00-538-9201
Loop Clamp
0.484" overall width 0.046" material thickness offset mount
00-538-9202
Loop Clamp
0.484" overall width 0.046" material thickness offset mount
