01-644-4682
Angle Bracket
Used on 5895-01-592-8791. tray, dsu drawer first leg has (6) .192 inch diameter thru holes. chromate surface treated angle
01-644-4683
Mounting Bracket
Used on 5895-01-592-8791. assembly, dsu tray bracket assembly consists of: (4) clamp, dsu drawer p/n: 09024B5211; (2) prop, dsu drawer p/n: 09024B5214; (1) tray, dsu drawer p/n: 09024B5216; (1) catch hook, dsu drawer p/n: 09024B5217-01; (1) catch hook, dsu drawer p/n: 09024B5217-02; guide pin, dsu drawer p/n: 09024B5218; (2) delrin, dsu drawer p/n: 09024B5219; (16) screw, flat hd p/n: MS24693-C273; (2) washer, lock, cres p/n: MS35338-141; (6) nut, hex, self locking, cres p/n: MS17830-010f; (2) nut, hex cres, low height p/n: 91847A431; (as required) thread locker p/n: 242; (as required) adhesive, loctite, all-purpose p/n: 414; (as required) washer, flat, cres p/n: MS15795-814.
01-644-4686
Mounting Plate
Used on 5895-01-592-8791. angle, monitor, rear plate has (2) .266 inch thru diameter holes countersunk to .500 inch diameter at 82 degrees. center-to-center distance between mounting holes is 14.000". color chip number is 27040 per fed-std-595. chromate surface treated
01-644-4689
Double Angle Bracket
Used on 5895-01-592-8791. c-channel seal bracket has (4) .375 inch diameter thru holes in the center section. the center-to-center distance between mounting holes along the length is 32.468". the center-to-center distance between mounting holes along the width is 1.750". color is green, chip number 24533 per fed-std-595. chromate surface treated adjacent angles
01-644-4705
Mounting Plate
Plate
01-644-4706
Mounting Plate
Adjusting plate assembly
01-644-4712
Mounting Plate
Plate
01-644-4718
Plain Snap-in Standoff
01-644-4764
Mounting Plate
Used on 5895-01-592-8791. plate, vent cover, air transport chromate surface treated
01-644-4804
Catch Strike
Used on 5895-01-592-8791. 2.74" overall length 1.49" overall width catch hook, dsu drawer hook is to the right of the mounting plate.
01-644-4806
Catch Strike
Used on 5895-01-592-8791. 2.74" overall length 1.49" overall width catch hook, dsu drawer hook is to the left of the moungint plate.
01-644-4820
Angle Bracket
Used on 5895-01-592-8791. angle, equipment drawer first leg has (5) thru holes along the length. chromate surface treated angle
01-644-4830
Mounting Bracket
Used on an/aqs-2090. mount, ctd 1-mount, 4-inserts, 4-screw insert zinc surface treated
01-644-4900
Rigid Caster
Used on F-15SA.
01-644-4938
Access Cover
Cover
01-644-4960
Webbing Strap
Used on 5855-01-599-3055. M1A2 bulkhead strap
01-644-4974
Mounting Bracket
Used on 757 aipc aircraft. slider assembly
01-644-4986
Webbing Strap
Used on 5855-01-599-3055. M1A2 strap
01-644-5013
Mounting Bracket
01-644-5026
Line Supporting Strap
01-644-5052
Mounting Bracket
Bracket, mounting
01-644-5057
Angle Bracket
Bracket, clamping
01-644-5112
Multiple Angle Bracket
Used on 5895-01-592-8791. 17.66" overall length 21.79" overall width 0.125" material thickness bracket, 117 mount, lower bracket has (8) .391 inch diameter thru holes in the center section. chromate surface treated quadruple angle
01-644-5114
Mounting Plate
Used on 5895-01-592-8791. plate, rear chromate surface treated
01-644-5116
Mounting Plate
Used on 5895-01-592-8791. plate, front plate has (7) total holes, (5) with .298 inch thru diameter countersunk to .515 inch diameter at 82 degrees, chromate surface treated
01-644-5117
Mounting Bracket
Used on 5895-01-592-8791. 1.54" overall width end, blank, modified make from 79725-AL2010b. color is satin anodized finish. anodize surface treated
01-644-5118
Mounting Bracket
Used on 5895-01-592-8791. 2.30" overall length 0.875" overall width block, mounting, faceplate item is heat treated to -T6511. bracket has (3) total holes; (2) with .190-32 unf-2b threaded thru hole, chromate surface treated
01-644-5255
Drawer Extension Slide Section
01-644-5329
Mounting Bracket
01-644-5345
Mounting Bracket
01-644-5358
Synchro Clamp
Used on 5985-01-592-8791 communication system. clamp, shelf
01-644-5376
Angle Bracket
Used on 5895-01-592-8791 communication system. 26.000" overall length 0.090" material thickness mount, led light angle
01-644-5384
Access Cover
Used on 5895-01-592-8791 communication system. assembly, status board, door
01-644-5414
Protective Dust And Moi Cap-plug
Vinyl hanger cap used to hang tools; round
01-644-5444
Mounting Bracket
01-644-5457
Corrosion Preventive Anode
Used on sentinel class fast response cutter b (frc-b). 0.625" hole diameter
01-644-5472
Mounting Bracket
Used on communication system. 000-00-000-0000
01-644-5483
Corrosion Preventive Anode
Used on sentinel class fast response cutter b (frc-b). tanker type with strap core
