01-642-5931
Tie Down Adapter
Adapter
01-642-6057
Protective Dust And Moisture Cap
Max psi at 72 degrees farenheit 125; 3/4 in coupling
01-642-6059
Access Cover
Used on 3895-01-599-9380 mixing paint, asphalt. belt guard
01-642-6067
Protective Dust And Moistu Cover
01-642-6068
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 31.000" overall length 10.000" overall width cover, belt guard
01-642-6070
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 50.700" overall length 24.700" overall width cover, belt guard
01-642-6075
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 35.813" overall length 9.250" overall width guard cover
01-642-6078
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 29.500" overall length 10.000" overall width drive guard exp. metal
01-642-6081
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 26.600" overall length 10.000" overall width cover, belt guard
01-642-6082
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 61.700" overall length 15.900" overall width cover, belt guard, seb sheet exp 1/2 x 13/pga
01-642-6087
Protective Dust And Moistu Cover
Used on 3895-01-599-9380 mixing paint, asphalt. 34.500" overall length 10.000" overall width cover, sheet bgh universal drive guard
01-642-6094
Mounting Bracket
Bracket
01-642-6101
Flush Catch
Used on aircraft support. latch assembly
01-642-6102
Mounting Bracket
Bracket
01-642-6168
Straight Headless Rod
01-642-6203
Quick Release Plunger
Used on 2355-01-619-9288; medium mine protected vehicle - mmpv. right-hand 0.560" thread length 13 thread quantity per inch retractable spring plunger
01-642-6222
Grommet Assembly
Used on U-2. grommet assembly
01-642-6225
Mounting Plate
Used on multi-spectral targeting system. plate, mounting
01-642-6369
Threaded Spacing Standoff
Standoff, hex head thread info. 6-32, finish info 10
01-642-6370
Threaded Spacing Standoff
Standoff hex head thread info. 6-32, finish info. 10
01-642-6420
Retaining Bail
Bale, retaining, swivel locking device, 2 studs, washers
01-642-6555
Retaining Strap
Used on 5419-01-539-7177. 5.8125" overall length 1.2520" overall width 0.125" material thickness steel two-hole clamp zinc surface treated curved arch
01-642-6597
Loop Clamp
0.188" inside diameter 0.500" material thickness clamo, loop type, cushioned support
01-642-6600
Loop Clamp
0.313" inside diameter 0.500" material thickness clamp, loop type, cushioned support
01-642-6753
Mounting Bracket
Used on 5419-01-539-7182. 14.000" overall length 3.250" overall width mounting bracket, wall, sink/urinal
01-642-6815
Protective Dust And Moistur Plug
01-642-6874
Plug Button
Used on outboard motor. plug 2
01-642-6907
Mounting Bracket
01-642-6911
Sliding Door Track
01-642-7049
Mounting Plate
Plate, top
01-642-7066
Blank Panel
Panel, inner
01-642-7072
Access Cover
Used on b-2 bomber. faceplate, red/orange
01-642-7100
Swivel Caster
Light duty caster swivel offset
01-642-7103
Lock-release Lever
Used on an/spn-41. tool, extraction has a .125 inch thick adhesive backed neoprene rubber pad. item consists of: (1) handle, p/n: 43033-01477-3; (1) bar, p/n: 43033-01477-5; (as required) rubber pad, p/n: 43033-01477-7; (1) screw, cap hex, hd p/n: MS35308-312; (1) nut, self-lkg, hex, p/n: MS21083-C4.
01-642-7175
Blank Panel
Used on rmmv v6.0. aux panel manifold
01-642-7181
Dust And Moisture Seal Boot
Boot, circuit breaker, double switch handle
01-642-7196
Mounting Bracket
01-642-7303
Lock Bar
Stabilizer bar with lanyard item adds additional lateral stability by locking the bed side rails in place, while the lanyard prevents the stabilizer bar from being displaced once the bed is disassembled or in transit; outer dims (set of 4) are: 30.5 cm l x 1.5 cm w
01-642-7331
Manual Control Lever
01-642-7336
Protective Dust And Moistu Cover
01-642-7381
Stand Base
Used on 6625-01-597-0700 test set,telecommunication system. 229.0mm overall width paint surface treated
01-642-7447
Rod Retainer Clip
Clip, rod mtl. acetal celcon, purple, prong to fit 5.75 hole
01-642-7450
Catch Strike
36.0" overall length 16.0" overall width 2.0" material thickness guard, striker pin
