01-633-4142
Mounting Bracket
Used on ballistic door, cvn 78 class aircraft carrier. 3.750" overall length 2.500" overall width pad, hinge
01-633-4184
Double Angle Bracket
Used on an/tpn-31(v) 7. slide rail, jack plate, front (passenger side) adjacent angles
01-633-4185
Double Angle Bracket
Used on slide rail, jack plate, rear (driver side). an/tpn-31 (v) 7 finish is iridite coat, then prime adjacent angles
01-633-4187
Mounting Bracket
Used on an/tpn-31(v) 7. 31.97" overall length 8.97" overall width mount, generator chromate surface treated
01-633-4188
Mounting Bracket
Used on an/tpn-31(v) 7. 4.70" overall length strike-end, driving rod bracket, left chromate surface treated
01-633-4189
Mounting Bracket
Used on an/tpn-31(v) 7. 4.70" overall length strike-end, driving rod bracket, right chromate surface treated
01-633-4191
Mounting Bracket
Used on an/tpn-31(v) 7. 2.85" overall width skid stop (driver front/passenger rear) bracket has (2) mounting slots. chromate surface treated
01-633-4192
Mounting Bracket
Used on an/tpn-31(v) 7. 2.85" overall width skid top (driver rear/passenger front) bracket as (2) mounting slots. chromate surface treated
01-633-4193
Mounting Bracket
6.22" overall length 4.66" overall width stop, post reflector (driver side) an/tpn-31 (v) 7 chromate surface treated
01-633-4194
T Bracket
Used on an/tpn-31(v) 7. l-810 antler mount center projection
01-633-4205
Mounting Bracket
01-633-4224
Mounting Bracket
01-633-4250
Angle Bracket
01-633-4267
Drawer Extension Slide
Polymer ball bearings; load rating 100lbs
01-633-4269
Protective Dust And Moistur Plug
01-633-4291
Mounting Plate
Used on special aircraft and engine tool and support equipment/parts. plate, resistor mo---
01-633-4292
Mounting Plate
Used on 2355-01-481-8570. base plate
01-633-4294
Angle Bracket
Used on AH-64D. 6.0" overall length 4.0" overall width 2.0" material thickness bracket, lwr, aft, lh
01-633-4309
Double Angle Bracket
01-633-4311
Mounting Bracket
01-633-4312
Retaining Clip
Used on AH-64D. 2.000" overall length clip, retaining
01-633-4316
Retaining Clip
Used on AH-64D. 2.400" overall length clip, outbd
01-633-4329
Retaining Clip
Used on AH-64D. clip, lh-lwr, flare
01-633-4332
Mounting Bracket
Used on sentinel class fast response cutter b (frc-b). wall mount, indoor/outdoor pccn SE0551, plisn 3; next higher assembly 5835-01-613-5867 camera, television; color light gray
01-633-4336
Lock-release Lever
Lock
01-633-4350
Lock-release Lever
Lock
01-633-4354
Lock-release Lever
Lock
01-633-4359
Protective Dust And Moistu Cover
01-633-4361
Protective Dust And Moistu Cover
01-633-4362
Protective Dust And Moistu Cover
01-633-4363
Protective Dust And Moistu Cover
Used on 3805-01-560-2384. cover
01-633-4364
Resilient General Purpose Mount
Used on 2410-01-565-2599. mount, resilient, general purpose
01-633-4376
Spring Tension Clip
0.020" material thickness cadmium surface treated
01-633-4380
Retaining Clip
Used on AH-64D. 2.20" overall length clip, lh-flare dispenser
01-633-4393
Retaining Clip
Used on AH-64D. 2.300" overall length clip, lh, hiews-satco
01-633-4398
Retaining Clip
Used on AH-64D. 6.0" overall length clip, lh, hidas balla
01-633-4405
Mounting Bracket
Used on lcca an/bqs-2. 9.370" overall length 2.130" overall width fairing, bottom, aft-center (port)
01-633-4443
Webbing Strap
01-633-4446
Mounting Bracket
01-633-4452
Drawer Extension Slide Section
Used on an/spn-41. slide assembly (left)
01-633-4454
Angle Bracket
Used on boat, inflatable. vavle, bracket, 3-way swagelock material is cres 316. finish is electropolish. angle
01-633-4520
Spring Tension Clip
Used on ballistic door, cvn 78 class aircraft carrier. 0.220" hole diameter 0.060" material thickness spring clip u-shaped
01-633-4611
Mechanical Stop
Used on saw,cut off,m. stop assembly
01-633-4625
Mounting Bracket
Used on shallow water tilt kit. bracket
01-633-4629
Retaining Clip
Used on tiller handle kit (jet 40). clip
01-633-4641
Handle Grip
Used on steering systems and components; tiller handle kit (jet 40). grip
01-633-4642
Dust And Moisture Seal Boot
Used on oil, injection components. boot
01-633-4648
Lock-release Lever
Used on swivel bracket. lever-reverse lock (red)
01-633-4649
Angle Bracket
01-633-4650
Protective Dust And Moisture Cap
Used on clamp bracket. cap, tilt stop pin
