01-630-5806
Access Cover
Used on bf225ak2xa outboard motor. cover assembly, upper crankcase
01-630-5816
Mounting Bracket
01-630-5818
Helical Compression Spring Seat
Used on bf225ak2xa outboard motor. spring, motor
01-630-5832
Mounting Bracket
Bracket
01-630-5868
Access Cover
Used on ttk-356/e37t-24. panel-trough support
01-630-5982
Blank Panel
Used on elcs pao service unit. rear panel assembly
01-630-6010
Loop Clamp
Used on 1680-01-629-2005.
01-630-6059
Leakproof Seal Plug
Used on turning gear assembly. plug thread size is 0.500 in (nom)
01-630-6070
Threaded Spacing Standoff
2b right internal thread class right-hand right internal 40 right internal thread quantity per inch stud nut left end (in flange/head) has internal hex drive with 0.094 in (nom) across flats; grip range in" is 0.376 (min) passivate surface treated flanged left internal thread unc right internal thread series
01-630-6187
Mounting Bracket
Used on 2350-01-458-7318. 8.63" overall length 5.75" overall width ecau control mount
01-630-6211
Protection Bellows
Bellows, protection
01-630-6223
Rod End Clevis
Clevis (twisted) pin hole diameter: 0.9375". pin diameter: 0.875". usable length: 4.25". opening width: 1.25". working load limit: 20, 000 lbs. weight: 4.30 lbs. zinc plated. black painted finish. paint surface treated
01-630-6324
Rod End Clevis
Used on 210 wmec ssdg governor; support mpc m-c-11553. engine diesel; bdt 429; hp 1800 r
01-630-6348
Access Cover
Used on a/e37t-24. door, right hand
01-630-6398
Access Cover
Used on dragospear. cover cover includes 2 nylon acorn nuts
01-630-6424
Threaded Spacing Standoff
Used on e-2d advanced hawkeye. standoff, threaded, s
01-630-6433
Threaded Rod End
Used on 1520-01-457-5179. 3a thread class right-hand 24 thread quantity per inch rod end assembly thread size is 0.3125" thread length is 1.156" unjf thread series
01-630-6502
Access Cover
Used on a/e37t-24. door, right hand
01-630-6504
Access Cover
Used on a/e37t-24. door, left hand
01-630-6509
Access Cover
Used on a/e37t-24. door, left hand
01-630-6562
Mounting Plate
01-630-6581
Mounting Bracket
01-630-6606
Mounting Bracket
Used on beechcraft hawker aircraft. bracket assy-label attachment
01-630-6625
Retaining Clip
01-630-6680
Mounting Plate
01-630-6690
Mounting Plate
01-630-6772
Access Cover
Used on uci274 to h one bearing machine. p.m.g. cover
01-630-6773
Mounting Plate
Dataplate
01-630-6775
Access Cover
A.v.r. cover plate
01-630-6812
Mounting Bracket
01-630-6814
Retaining Clip
01-630-6816
Threaded Snap-in Standoff
01-630-6818
Retaining Clip
01-630-6824
Angle Bracket
Used on 4910-01-627-0524. generator slide angle bracket has (7) holes on the first leg (6) with .26 inch diameter angle
01-630-6849
Double Angle Bracket
Used on 4910-01-627-0524. bracket, ladder double angle
01-630-6853
Double Angle Bracket
Used on 4910-01-627-0524. drain mount bracket has a centrally located hole along the middle leg with .33 inch diameter. adjacent angles
01-630-6855
Angle Bracket
Used on 4910-01-627-0524. air compressor slide angle bracket has (7) mounting holes on first leg (6) with .26 inch diameter, angle
01-630-6873
Threaded Spacing Standoff
Male round knurled standoff flanged right external threads
01-630-6939
Threaded Spacing Standoff
2a left external thread class right-hand left external 0.375" left external thread length 32 left external thread quantity per inch passivate surface treated left internal unc left external thread series
01-630-6954
Mounting Bracket
Used on cargo doors. serrated plate 0.10X2.5X2.2;
01-630-6957
Elastic Strap
Strap, elastic
01-630-6993
Mounting Bracket
Used on 6115015617788. 109.2mm overall length bracket, mounting
01-630-7007
Mounting Bracket
Used on 4940016011928. bracket, mounting
01-630-7013
Loop Clamp
0.500" overall width 0.050" material thickness offset mount
01-630-7033
Access Cover
Used on 4120-01-597-5423. barrier, single port short, 5mm hole w/ washer assy
01-630-7082
Resilient General Purpose Mount
Used on 5m eng trail. mount, resilient, gen material is rubber
