01-626-0998
Multiple Angle Bracket
01-626-1009
Filler Opening Cap
Used on caterpillar equipment-sweeping group. tank, cap
01-626-1010
Access Cover
Cover, access expansion joint assembly
01-626-1012
Electronic Equipmen Hardware Kit
Dve an/vas -5b space-cable pass through armor ready hemt
01-626-1029
Mounting Plate
01-626-1030
Mounting Plate
01-626-1057
Mounting Plate
Used on mrap buffalo mk2a2. air valve panel 5ea slotted holes 0.594" x 0.344"; 4ea slotted holes 0.531" x 0.281"
01-626-1086
Protective Dust And Moisture Cap
Used on P-8.
01-626-1132
Mounting Plate
01-626-1135
Access Cover
Cover, access expansion joint assembly
01-626-1166
Sliding Door Hanger
01-626-1176
Mounting Bracket
Transfer case mounting bracket drawing 200906001 indicated on drawing 4088885
01-626-1181
Manual Control Lever
01-626-1184
Nut And Bolt Retainer
01-626-1186
Assembled Nut Retainer
Used on C-5M. retainer, assembled
01-626-1203
Angle Bracket
Used on 4940-01-601-1930. switch bracket x-axis
01-626-1214
Mounting Bracket
01-626-1218
Mounting Bracket
01-626-1235
Angle Bracket
4.125" overall length 3.50" overall width
01-626-1237
Mounting Bracket
Angle-swing limit mounting
01-626-1240
Threaded Spacing Standoff
01-626-1243
Mounting Bracket
01-626-1254
Mounting Bracket
01-626-1283
Loop Clamp
Used on 1015-01-598-4568. 0.47" overall width 0.051" material thickness clamp, loop, cushioned, elongated the cushion temperature range is -40 - 212 degrees f. the strap temperature range is -320 - 600 degrees f. clamp loop comes with a wedge. passivate band surface treated multiple loop
01-626-1284
Retaining Strap
Used on 2330-01-580-7654. 2.375" overall width 0.040" material thickness cladding end strap
01-626-1296
Loop Clamp
0.271" overall width 0.015" material thickness clamp, loop, nylon clamp loop is natural color. single loop
01-626-1344
Mounting Bracket
Used on 4940-01-601-1930.
01-626-1359
Angle Bracket
01-626-1385
Mounting Plate
Used on 2320-01-564-6882. plate, mounting, shipping
01-626-1404
Mending Plate
01-626-1453
Mounting Bracket
Bracket, polyester, black
01-626-1465
Mounting Plate
01-626-1483
Snap Hook
Used on 32 ft tpsb outfit equipment, p/n 32tpsb-601-002. snap hook clip used to hold the latch gate of lsc 367 & 667 snap hooks; attached to a pole it can be used to reach out & snap the hook onto mooring buoys, bow cleats, deck rings etc; once the hook is engaged, a simple pull back on the pole releases the hook & latch gate simultaneously; constructed of 1/8 inch type 304 stainless steel; mounting screws included; snap hooks sold seperately; pole not included
01-626-1698
Mounting Bracket
01-626-1724
Protective Dust And Moisture Cap
Used on dust cover. dust caps 2.50 mm
01-626-1758
Access Cover
Used on ec-130j. 3.63" inside diameter 0.196" hole diameter 4.75" outside diameter plate, blanking primer surface treated
01-626-1759
Mounting Bracket
01-626-1762
Mounting Bracket
Used on nsn 2320-01-549-8611; mrap - m-atv. 9.5" overall length 8.7" overall width bracket
01-626-1767
Mounting Plate
01-626-1786
Mounting Plate
01-626-1791
Angle Bracket
4.0" overall length 3.0" overall width 0.25" material thickness
01-626-1792
Rod End Connector
