01-619-2128
Filler Opening Cap
Cap generator set; 33.0 ede
01-619-2179
Protective Dust And Moisture Cap
Osp pop up vent cap
01-619-2181
Lock-release Lever
01-619-2201
Retaining Clip
01-619-2206
Loop Clamp
0.50" overall width 0.032" material thickness clamp, loop, cushioned, rectangular cushion temperature range is -40deg f to +212deg f; strap temperature range is -320deg f to +600deg f passivate band surface treated rectangular
01-619-2244
Mounting Bracket
01-619-2246
Access Cover
Used on 3810-01-550-3454. plate, cover
01-619-2254
Mounting Bracket
Used on 2355-22-622-7966. 321.0mm overall length 270.0mm overall width bracket, welded
01-619-2260
Tie Down Adapter
Used on nsn 4940-01-591-0265. 3.312" overall length 2.500" overall width dee ring style tie-down ring base plate 1.625 w by 1.312 l, single mounting hole zinc surface treated
01-619-2266
Access Cover
Used on multi-mode digital radio (mdr). faceplate, receiver
01-619-2267
Protective Dust And Moisture Cap
01-619-2268
Access Cover
Used on multi-mode digital radio (mdr). faceplate, transmit
01-619-2275
Access Door Hinge
Used on 4940-01-601-1928. 7.450" overall length door hinge assembly with mounting hardware
01-619-2291
Mounting Bracket
Bracket, luminaire, for wood pole ship weight is 20.0 lbs
01-619-2413
Retaining Clip
Used on h-53-aft fuselage.
01-619-2462
Protective Dust And Moisture Cap
Used on nsn:5865-01-515-0444. cap, proctive, dust
01-619-2472
Hinged Threaded Standoff
Used on B-1. right-hand right external 0.250" right internal thread length 32 right external thread quantity per inch hinged standoff, male/female use with standoff 1888 zinc surface treated hinged, threaded un right external thread series
01-619-2492
Permanent Magnet
01-619-2497
Threaded Spacing Standoff
Used on B-1. 2b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) 0.620" thread length 32 left internal (includes thru thread) thread quantity per inch aluminum female threaded hex standoff internally threaded full length unf left internal (includes thru thread) thread series
01-619-2516
Buckle
Used on 5980-01-558-1080. 4.37" overall length 2.05" overall width ratchet fastener material is cold rolled steel
01-619-2552
Protective Dust And Moisture Cap
Used on B1B SE. protective cap for bulkhead connector
01-619-2555
Loop Clamp
Used on mrap rg-33 auv. 2.00" inside diameter torca torctite (with gasket) band clamp t-bolt
01-619-2575
Loop Clamp
Used on mrap rg-33 auv. clamp assembly compressor
01-619-2592
Angle Bracket
01-619-2594
Retaining Strap
Used on mrap rg-33 auv. strap cable
01-619-2602
Clamp Bolt Assembly
01-619-2608
Angle Bracket
01-619-2615
Butt Hinge
0.025" material thickness unfinished steel piano hinges without holes butt
01-619-2799
Mounting Bracket
Magnetic mounts
01-619-2812
Protective Dust And Moisture Cap
Cap assembly calibration cap calibration assembly pump mulitrae series pack of 3
01-619-2820
Access Cover
Used on 5840015784119. cover, access 18AR7 2.5 inch x 0.1875 inch aluminum riveted grating
01-619-2888
Loop Clamp
Used on 2355015901660. 0.625" overall width 0.060" material thickness clamp, loop-cushioned cushion color: red/orange zinc surface treated single loop
01-619-3012
Mounting Bracket
01-619-3062
Mounting Bracket
01-619-3070
Angle Bracket
01-619-3071
Mounting Bracket
01-619-3072
Mounting Bracket
01-619-3076
Mounting Bracket
01-619-3077
Angle Bracket
01-619-3080
Mounting Bracket
01-619-3081
Mounting Bracket
01-619-3082
Mounting Bracket
01-619-3083
Mounting Bracket
01-619-3084
Mounting Bracket
01-619-3086
Mounting Bracket
01-619-3087
Mounting Bracket
01-619-3097
Loop Clamp
Used on boat, personne. clamp, loop
01-619-3106
Protective Dust And Moisture Cap
Cap, protection
01-619-3108
Protective Dust And Moisture Cap
Cap, protective cap is straight line knurled along the outside edge.
