01-594-5486
Mounting Bracket
01-594-5487
Mounting Bracket
01-594-5488
Mounting Bracket
01-594-5489
Mounting Bracket
01-594-5490
Mounting Bracket
01-594-5491
Mounting Bracket
01-594-5492
Mounting Bracket
01-594-5493
Mounting Bracket
01-594-5494
Mounting Bracket
01-594-5495
Mounting Bracket
01-594-5496
Mounting Bracket
01-594-5497
Mounting Bracket
01-594-5498
Mounting Bracket
01-594-5499
Mounting Bracket
01-594-5500
Mounting Bracket
01-594-5501
Mounting Bracket
01-594-5502
Mounting Bracket
01-594-5503
Mounting Bracket
01-594-5505
Mounting Bracket
01-594-5506
Mounting Bracket
01-594-5507
Mounting Bracket
Standoff support
01-594-5508
Mounting Bracket
Standoff support
01-594-5509
Mounting Bracket
01-594-5510
Mounting Bracket
01-594-5511
Mounting Bracket
01-594-5512
Mounting Bracket
Block, pivot shaft
01-594-5514
Mounting Bracket
01-594-5515
Mounting Bracket
6.50" overall length 3.50" overall width bracket assembly, clamp T6 heat treat anodize surface treated
01-594-5516
Multiple Angle Bracket
Bracket assy, stowage strut, aft each leg has two threaded holes. quadruple angle
01-594-5517
Mounting Bracket
01-594-5518
Mounting Bracket
01-594-5519
Mounting Bracket
3.125" overall length 1.250" overall width bracket pipe anodize surface treated
01-594-5520
Mounting Bracket
3.625" overall length 2.750" overall width bracket, latch type ii, class 2, black anodize surface treated
01-594-5521
Mounting Bracket
11.0" overall length 3.875" overall width bracket, transmission T6 heat treat anodize surface treated
01-594-5522
Mounting Bracket
1.750" overall length 1.000" overall width bracket, switch aluminum 6061-T6
01-594-5523
Mounting Bracket
6.000" overall length bracket, latch, door mat: al aly sand cstg 11-a-601, 356-T6 uns A03560
01-594-5524
Mounting Bracket
5.000" overall length 4.000" overall width bracket, infrared light T6 heat treat
01-594-5525
Mounting Bracket
5.500" overall length 1.000" overall width bracket, mounting aluminum 6061-T6 anodize surface treated
01-594-5526
Mounting Bracket
2.750" overall length 2.500" overall width block, hatch T6 heat treat anodize surface treated
01-594-5527
Mounting Bracket
11.750" overall length bracket paint light gray per mil-a-1303 phosphate manganese surface treated
01-594-5528
Double Angle Bracket
01-594-5529
Mounting Bracket
5.625" overall length 2.150" overall width bracket, infrared light mat: al aly sand cstg 11-a-601, 356-T6 uns A03560 anodize surface treated
01-594-5530
Mounting Bracket
2.750" overall length 0.750" overall width bracket, infrared light T6 heat treat anodize surface treated
01-594-5531
Mounting Bracket
10.625" overall length 3.313" overall width bracket, shelf storage also has 4 mounting holes, 0.344 in, c'bored 0.56 in.
01-594-5532
Mounting Bracket
01-594-5533
Mounting Bracket
3.00" overall length 1.562" overall width bracket, strap two holes drilled thru
01-594-5534
Mounting Bracket
Used on 10001-lm2527203. 2.750" overall length 1.015" overall width bracket, switch all surface roughness designations apply before protective coat; all dimensions apply before protective coat except as noted; temper T6; bore indicated; 4 possible mounting holes: two at 0.343"; once at 0.625"; one at 0.156"; surface finish; complete details refer to drawing anodize surface treated
01-594-5535
Mounting Bracket
Used on 2527010. 1.000" overall width bracket, strap all dimension apply before protective coat; surface as rolled & fabricated; 2 holes 0.375"; slot 0.187"; 13 guage (0.0897) ; complete details refer to drawing zinc surface treated
01-594-5536
Mounting Bracket
1.875" overall length 1.750" overall width bracket, spring seat inspect entire item per mil-i-6866 type 2, thod c, cracks seems, laps not acceptable; material continued carbon steel aisi 1015-1025 or stainless steel investment casting mil-s-81591, 1c 17-4 qual: per ws 13585 class 2b, grade c; surface finish; complete details refere to drawing
01-594-5537
Mounting Bracket
Used on 257198. 1.875" overall length 0.500" overall width bracket, pistion actuating arm all surfaces roughness desingations apply before protective coat; all dimension s apply before protective coat except as noted; possible 4 mounting holes; surface finish; complete details refer to drawing
