01-528-1941
Spring Tension Clip
Used on bulkhead assembly. clip has one unthreaded mounting hole with a 0.128 inch diameter. has two unthreaded mounting holes with a 0.062 inch diameter. width is 2.625". lacquer acrylic surface treated
01-528-1971
Access Cover
Used on holding fixture. cover assembly
01-528-2015
Mounting Plate
Used on install kit. slide
01-528-2029
Spring Tension Clip
0.103" hole diameter 0.016" material thickness tin surface treated standoff
01-528-2038
Retaining Clip
Used on 2430-01-423-2819.
01-528-2040
Mounting Bracket
Used on 2350-01-513-8431.
01-528-2061
Mounting Plate
01-528-2068
Mounting Bracket
Used on 2430-01-423-2819 deployable, universal, combat earthmover. plate as
01-528-2075
Loop Clamp
Used on aircraft, eagle f-15. 0.046" material thickness drawing name - clamp, loop, plain, support aircraft anodize surface treated single loop
01-528-2077
Mounting Bracket
01-528-2091
Mounting Plate
01-528-2146
Protective Dust And Moisture Cap
Used on acog, riffle scope. protective cap, windage
01-528-2154
Mounting Bracket
01-528-2291
Mounting Plate
01-528-2298
Retaining Strap
01-528-2302
Protective Dust And Moisture Cap
01-528-2303
Compression Cup
01-528-2312
Loop Clamp
Used on f/a-22 raptor.
01-528-2319
Manual Control Lever
01-528-2340
Webbing Strap
01-528-2360
Multiple Angle Bracket
Used on 2430-01-423-2819 deployable universal combat earthmover. right hand bracket assembly
01-528-2365
Locking Access Door Ring
01-528-2377
Threaded Rod End
Used on 2430-01-423-2819 deployable universal combat earthmover. rod end
01-528-2385
Mounting Plate
Plate, side 4 additional unthreaded holes thru thickness of mount 0.272 diameter. mount holes are 5 on side
01-528-2417
Mounting Plate
Support, front
01-528-2421
Spring Tension Clip
01-528-2432
Nut And Bolt Retainer
Used on nsn 1520-01-355-8250, helicopter attack. next higher assy: day sensor subassembly oip, p/n: 79763244-009
01-528-2447
Mounting Bracket
Used on 2430-01-423-2819 deployable universal combat earthmover. eye
01-528-2450
Mounting Plate
Plate, rear 8 holes are counterbored
01-528-2470
Mounting Plate
Plate, center all holes are countersunk
01-528-2485
Mounting Plate
Plate, side 5 holes on side
01-528-2559
Mounting Plate
Plate, side C5 holes countersunk
01-528-2575
Drawer Extension Slide
01-528-2603
Angle Bracket
Used on vcc1 armored combat vehicle. bracket intercom box length in" 6.750; next higher assembly K10866200 angle
01-528-2610
Mounting Plate
01-528-2611
Mounting Plate
01-528-2634
Access Cover
Cover canister
01-528-2685
Manual Control Handle
01-528-2686
Manual Control Handle
01-528-2702
Mounting Bracket
Used on tank vcc1. 11.500" overall length 0.109" overall width bracket mounting, periscope
01-528-2737
Mounting Bracket
Used on F-119.
01-528-2742
Nut And Bolt Retainer
01-528-2771
Detent Plunger
01-528-2787
Mounting Plate
01-528-2857
Runner
14.500" overall length 0.420" overall width runner, slide
01-528-2891
Rim Latch Set
Push to close latches this is a round latch with a round pull tab to release it from the pawl; the diameter is 2.410" passivate pin surface treated
01-528-2915
Angle Bracket
Used on 2350-01-513-8431; knight with fs3. bracket, breaker offset angle
