01-486-3367
Bumper
2.450" hole diameter
01-486-3410
Cushioning Pad
01-486-3470
Threaded Spacing Standoff
Internally threaded full length
01-486-3481
Angle Bracket
Angle
01-486-3501
Threaded Spacing Standoff
Internally threaded full length
01-486-3710
Helical Compression Spring Seat
1.5250" bore diameter spring base plate seat
01-486-3722
Helical Compression Spring Seat
01-486-3748
Plain Snap-in Standoff
01-486-3776
Expansion Plug
Used on valve ball 2. 0.620" material thickness err default
01-486-3794
Rod End Clevis
Used on nssn class sub,wpns hoist hinge. 2b rod connection thread class right-hand rod connection 2.380" rod connection thread length 1.500" hole diameter 7.100" overall width 12 rod connection thread quantity per inch clevis unf rod connection thread series
01-486-3852
Strap Fastener Loop
01-486-3897
Threaded Spacing Standoff
Grooved w/ left internal
01-486-3920
Threaded Spacing Standoff
01-486-3931
Hinged Threaded Standoff
Used on tornado.
01-486-3947
Pawl Fastener
01-486-3948
Pawl Fastener
01-486-3950
Pawl Fastener
01-486-3961
Mounting Bracket
Used on eplss enhanced precision land survey inertial guidance system control coordinate data unit. cdu adapter bracket assy
01-486-3967
Protective Dust And Moisture Cap
Used to protect aircraft pump drive shaft during shipment
01-486-3968
Retaining Clip
Clip, mirror, exit
01-486-4039
Mounting Bracket
Used on c-17a aircraft. retainer, seal fan thrust rev
01-486-4047
Mounting Plate
Used on c-17a aircraft. retainer
01-486-4048
Mounting Plate
Used on c-17a aircraft. retainer
01-486-4105
Detent Plunger
01-486-4113
Lock Bolt
Diameter size is 4.000"
01-486-4115
Resilient General Purpose Mount
Round w/flange threaded stud
01-486-4120
Access Cover
Used on smoke generator. 7.000" outside diameter
01-486-4136
Resilient General Purpose Mount
01-486-4222
Cushioning Pad
Ready for transfer; J6r; 08-10-2009.
01-486-4229
Cushioning Pad
Ready for transfer; J6r; 08-11-2009.
01-486-4245
Plain Snap-in Standoff
01-486-4277
Spring Tension Clip
Used on engine ej200. 5.5mm hole diameter 0.9mm material thickness passivate surface treated standoff
01-486-4292
Spring Tension Clip
Used on engine ej200. 5.5mm hole diameter 0.9mm material thickness passivate surface treated standoff
01-486-4301
Spring Tension Clip
Used on engine ej200. 5.5mm hole diameter 0.7mm material thickness passivate surface treated standoff
01-486-4303
Spring Tension Clip
Used on engine ej200. 5.5mm hole diameter 0.7mm material thickness passivate surface treated standoff
01-486-4315
Mounting Bracket
Used on early warning system. ico; -6 cone, 2.000 by 4.000,
01-486-4318
Bumper
2.000" overall length 1.500" overall width
01-486-4345
Plain Snap-in Standoff
01-486-4352
Clamping Catch
01-486-4369
Mounting Bracket
10.49mm overall length includes screws
01-486-4763
Manual Control Handle
01-486-4765
Mounting Plate
Used on F119. application
01-486-4768
Threaded Spacing Standoff
Plain finish, thread 6/32, tapped thru internally threaded full length
01-486-4800
Protective Dust And Moisture Cap
01-486-4812
Straight Headless Rod
Used on fairing cover-escape hatch. hinge, pin
01-486-4817
Threaded Spacing Standoff
Used on control panel. right-hand left internal (includes thru thread) 3.000" left internal (includes thru thread) thread length passivate surface treated internally threaded full length unc left internal (includes thru thread) thread series
01-486-4870
Angle Bracket
Used on 2350-01-369-6083. bracket, smoke control panel angle
