00-370-0507
Angle Bracket
Second leg has teeth on both sides angle
00-370-0558
Angle Bracket
3 threaded holes on second leg; second leg has u-shaped cut at center angle
00-370-0559
Angle Bracket
00-370-0560
Recess Handle
00-370-0590
Roller Holder
Approx 0.219 in. lg; 0.188 in. od; 0.094 in. id; mounts by id
00-370-0606
Retaining Strap
1.500" overall length 1.250" overall width furnished with one round pin 0.500 in. lg, 0.188 in. dia
00-370-0629
Threaded Spacing Standoff
00-370-0642
Drawer Extension Slide Section
00-370-0686
Threaded Spacing Standoff
0.2185" right external thread length nickel surface treated
00-370-0689
Compression Cup
Used on w/s: kidd class ddg; airborne mobile dir air spt ctl (2id),(02mjul83)(an/uyq-3a); los angeles class ssn (688); forrestal class cv; spruance class dd (963); close in weapon system (ciwx-phalanx); nimitz class cvn; sturgeon class ssn (637); teletype, model 28. 2 bolt hole quantity
00-370-0709
Synchro Clamp
0.125" hole diameter
00-370-0710
Angle Bracket
00-370-0711
Angle Bracket
Furnished with foot on second leg; spring accomodating hole on foot 0.064 in. dia
00-370-0713
Synchro Clamp
00-370-0717
Angle Bracket
00-370-0768
Retaining Strap
1.250" overall length 0.937" overall width any acceptable material thickness straight arch
00-370-0771
Angle Bracket
00-370-0814
Angle Bracket
First leg has open slot at end, 0.188 in. lg; 0.125 in w; second leg has open slot, 0.343 in. lg; 0.125 in. w; 2 slots, each 0.188 in. lg; 0.125 in. w; center-to-center distance between slots 1.625 in.;
00-370-0824
Double Angle Bracket
Center section has 2 threaded holes, each 0.110 in. dia; center-to-center distance between holes 0.658 in.
00-370-0864
Threaded Spacing Standoff
2a right external thread class right-hand right external 0.468" right external thread length 32 right external thread quantity per inch projection one end left internal thread unc right external thread series
00-370-0871
Threaded Spacing Standoff
0.219" right external thread length projection both ends right external thread
00-370-0875
Threaded Spacing Standoff
0.218" right external thread length seven indentations across shaft
00-370-0911
Threaded Spacing Standoff
00-370-0943
Lock-release Lever
Matl-metal
00-370-0949
Angle Bracket
00-370-0957
Threaded Spacing Standoff
00-370-0975
Angle Bracket
00-370-0996
Synchro Clamp
0.093" hole diameter 2 mounting holes, center-to-center distance between holes 0.437 in.
00-370-1021
Split Tubular Clip
1.250" overall length
00-370-1043
Angle Bracket
00-370-1044
Threaded Spacing Standoff
00-370-1211
Angle Bracket
00-370-1251
Threaded Spacing Standoff
0.049" hole diameter 40 right external thread quantity per inch projection one end w/ right external thread
00-370-1413
Drawer Extension Slide Section
6.750 in.lg; 0.688 in.h; 0.035 in.w;
00-370-1461
Transom Chain
Material:steel; 1.460 in.lg;
00-370-1462
Threaded Spacing Standoff
9 rings around shaft, spaced 0.055 in. apart each
00-370-1503
Retaining Clip
00-370-1517
Drawer Extension Slide Section
Passivate surface treated
00-370-1536
Manual Control Lever
Material, nickel chrome steel; 0.041 in. thick
00-370-1549
Spring Holder
00-370-1722
Access Cover
Nickel surface treated
00-370-1732
Drawer Extension Slide Section
00-370-1734
Synchro Clamp
0.090" hole diameter material thickness 0.031 in.
00-370-1748
Access Hole Frame
Used on tty equipment.
00-370-1759
Angle Bracket
00-370-1791
Access Hole Frame
00-370-1808
Angle Bracket
00-370-1941
Clamping Catch
0.094" hole diameter passivate surface treated
