01-485-7633
Cushioning Pad
Pad set, damping, tailcone fwd perforated damped rubber sheet, bonded with bostic 1142
01-485-7636
Cushioning Pad
Pad set, damping, tailcone fwd perforated, damped rubber sheet, bonded with bostic 1142
01-485-7657
Loop Clamp
Used on 4610-01-366-4640.
01-485-7664
Mounting Bracket
Used on recovery vehicle,full tracked nsn 2350-01-390-4683. 5.000" overall length 16.280" overall width
01-485-7695
Synchro Clamp
0.186" hole diameter 0.110" material thickness original drawing name-clamp, relay; item may require rubber pad, chloroprene sheet iaw ams 3240 anodize surface treated mounting
01-485-7730
Resilient General Purpose Mount
Used in mated pairs with same s/n on both pieces stud
01-485-7768
Cushioning Pad
01-485-7769
Cushioning Pad
Pad set, damping, tailcone aft perforated damped rubber sheet, bonded with bostic 1142
01-485-7772
Cushioning Pad
Pad set, damping, tailcone aft perforateddamped rubber sheet, bonded with bostic 1142
01-485-7778
Cushioning Pad
Pad set, damping, tailcone aft perforated damped rubber sheet, bonded with bostic 1142
01-485-7784
Protective Dust And Moisture Cap
01-485-7787
Spring Tension Clip
0.090" hole diameter 0.010" material thickness standoff
01-485-7833
Cushioning Pad
Pad set damping perforated damp bonded sheet
01-485-7837
Cushioning Pad
Pad set damping tail cone aft perforated damp bonded sheet
01-485-7841
Loop Clamp
Used on torpedo, consu. 0.500" overall width 0.032" material thickness cushion color yellow; make from MS21919CF10 passivate band surface treated offset mount
01-485-7844
Cushioning Pad
01-485-7848
Cushioning Pad
Pad set damping perforated damp bonded sheet
01-485-7895
Threaded Spacing Standoff
Used on interconnection. 1/4 hex male-female standoff, thread: 6-32 chromate surface treated left internal
01-485-7975
Mechanical Stop
2.370" overall length 1.370" overall width marked "53711-6314791" in lower right corner of face passivate surface treated
01-485-7976
Manual Control Handle
Used on remote operating gear for hyd control vlv hs-1661. 2a thread class right-hand 0.812" thread length 15.250" overall length 1.000" outside diameter 10 thread quantity per inch handle, lower, stl hsg light diamond knurl for 5 inch outside diameter; 5/8 inch c'bore dia by 11.62 inch tubular unc thread series
01-485-7992
Mounting Bracket
4.500" overall length 3.000" overall width marked "53711-6314785" in lower left corner of face anodize surface treated
01-485-8119
Access General Purpose Door
Used on door assy, battery. item has 17 cam locks paint epoxy surface treated
01-485-8149
Access Door Hinge
Used on door assy, battery. 1.500" material thickness butt
01-485-8265
Protective Dust And Moisture Cap
Anodize surface treated
01-485-8282
Manual Control Handle
Used on torpedo, consu. 20.500" overall length 1.310" outside diameter glide handle has a 5 in. long, 0.800 in raised diamond knurl starting 1 in. from end without the pin hole; has an outer coat of paint, gray (color no. 36375, fed-std-595) plastic epoxy surface treated tubular
01-485-8288
Manual Control Handle
Used on 4610-01-366-4640. handle, valve no.3
01-485-8291
Access General Purpose Door
Used on torpedo, consu. access door, hinged generator cover material: aluminum alloy C355; additional surface treatment: primer, epoxy-polyamide anodize surface treated
01-485-8323
Angle Bracket
Used on f-119 engine.
01-485-8345
Access General Purpose Door
01-485-8357
Permanent Magnet
Named magnet assembly
01-485-8361
Access Door Hinge
Used on door access hinged, generator cover. 13.250" overall length 0.060" material thickness make from p/n a-a-55592-10-c butt
01-485-8365
Strap Hinge
Used on torpedo, consu. 72.000" overall length 0.050" material thickness this is a 72 in. strip that can be cut to size; there are 2 knuckles per in. butt
01-485-8383
Retaining Strap
0.980" overall length 0.480" overall width 0.022" material thickness mount, strap anodize surface treated tapered arch
01-485-8394
Loop Clamp
Used on clamp, piston rod. plain slotted head screw single loop
01-485-8400
Loop Clamp
Used on torpedo, consu. 0.485" overall width 0.050" material thickness single loop
01-485-8401
Loop Clamp
Used on clamp, piston rod. plain slotted head screw single loop
01-485-8415
Protective Dust And Moisture Cap
01-485-8421
Protective Dust And Moisture Cap
Used on 4610-01-366-4640.
01-485-8422
Mounting Bracket
Used on m-1 abrams tank chassis and launcher for heavy assault bridge; 5420-01-430-5403. bracket on charge pump; up assembly LSCP270215-2
01-485-8426
Access Door Hinge
Used on 2350-01-432-1526. this item consists of 3 parts 1 bar
01-485-8430
Protective Dust And Moistur Plug
Used on 4610-01-366-4640.
01-485-8441
Protective Dust And Moisture Cap
Used on m-1 abrams tank chassis and launcher for heavy assault bridge; 5420-01-430-5403. cap plug on charge pump; up assembly LSCP270215-2
01-485-8442
Access Door Hinge
Used on 2350-01-436-0005. 0.250" material thickness strap w/jamb leaf offset
01-485-8444
Lock-release Lever
Used on 4610-01-366-4640. nickel active case surface treated
01-485-8463
Protective Dust And Moistur Plug
Used on 4610-01-366-4640.
01-485-8481
Access Cover
Used on 4610-01-366-4640. lid, storage box per company - the material is fabric;
01-485-8484
Rod End Clevis
01-485-8490
Webbing Strap
Used on 4610-01-366-4640.
