01-475-3124
Mounting Bracket
Used on 2350-01-432-1526. 9.160" overall length 8.090" overall width bracket, mountng belt reel
01-475-3130
Angle Bracket
Used on HMMWV. bracket, reat winch clamp angle
01-475-3139
Helical Compression Spring Seat
Used on navy equipment,hatch ballistic flt deck. seat
01-475-3140
Helical Compression Spring Seat
Used on navy equip. 0.9375" bore diameter part may be zinc plated in accordance with fed spec qq-z-325, ty ii, cl 2, in lieu of galve seat
01-475-3147
Retaining Strap
Used on HMMWV. 4.000" overall length 1.000" overall width 0.060" material thickness one hole is 0.344 in diameter curved arch
01-475-3151
Helical Compression Spring Seat
Used on navy equip. 0.8125" bore diameter seat
01-475-3164
Loop Clamp
Used on HMMWV. 39-42 mm id t-bolt
01-475-3171
Retaining Strap
Used on HMMWV. mounting clamp curved arch
01-475-3225
Swivel Caster
01-475-3251
Friction Catch
Lever cadmium surface treated angle
01-475-3252
Mounting Bracket
Primer surface treated
01-475-3264
Vent Plug
Used on tank assy, ansul automan regulated release shipping assy for 1.5 gal mechanical, 3.0 gal mechanical or 3.0 gal electrical r102 fire suppression system.
01-475-3351
Butt Hinge
17.390" overall length 0.050" material thickness butt
01-475-3352
Butt Hinge
12.000" overall length 0.050" material thickness butt
01-475-3354
Butt Hinge
5.000" overall length 0.062" material thickness butt
01-475-3380
Protective Dust And Moistu Cover
Used on cw-21248-spq radome; an/spq9b antenna mk86 mods 13t15 gun tire control system;weapons system ticoneroga class cg. air vent which screws on to radome unit
01-475-3450
Door Handle
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3452
Mounting Bracket
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3456
Metal Grille
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3461
Mounting Bracket
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3464
Spring Tension Clip
0.281" hole diameter 0.035" material thickness hardness rockwell c 37-45 zinc surface treated single grip
01-475-3465
Retaining Strap
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3477
Dust And Moisture Seal Boot
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3480
Mounting Bracket
6.000" overall length 0.700" overall width left hand triple cooler reatainer bracket 2 slots 1.500 x 0.820" centered 1 inch in from each end
01-475-3482
Mounting Bracket
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3485
Mounting Bracket
6.000" overall length 0.700" overall width right hand triple cooler reatainer bracket 2 slots 1.500 x 0.820" centered 1 inch in from each end
01-475-3490
Access Cover
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23; 2420-66-148-7692, hmee (high mobility engineer excavator).
01-475-3493
Door Handle
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. handle assy apply finish 7.3.1 of mil-std-171, then paint iaw mil-c-53072 using fin sh 20.24 of mil-std-171: RIA148947-1 (pad) , color 686a tan, color chip 33446 of fed-std-595, RIA148947-2 (handle) , color 383 green, color chip 34094 of mil-std-595
01-475-3494
Mounting Plate
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. plate apply finish 5.3.2.3 of mil-std-171, then paint iaw mil-c-53702 using finish 20.24 of mil-std-171: RIA148889-1, color 686a tan, color chip 33446 of mil-std-595, RIA148889-2, color 383 green, color chip 34094 of mil-std-595
01-475-3497
Mounting Bracket
Used on nsn 2320-01-097-0260 hemtt (heavy expanded mobility tactical trucks), 2320-01-304-2277 and 2320-01-304-2278 pls (palletized loading system)..
01-475-3504
Bumper
0.157" hole diameter
01-475-3515
Access Cover
Used on assembly,control and display unit (cadu). drive door assembly assembled from p/n: 7245548-18/door, drive, one each; 7245548-56/lock door, one each; 7245548-59/latch door, two each
01-475-3522
Access Cover
Used on AAWS-M. cover, etm
01-475-3523
Angle Bracket
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. bracket apply finish 5.3.2.3 of mil-std-171, then paint iaw mil-c-53072 using finish 20.24 of mil-std-171: RIA148997-1, color 686a tan, color chip 33446 of fed-std-595, RIA148997-2, color 383 green, color chip 34094 of fed-std-595
01-475-3524
Rim Latch
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. door latch replace existing hook rod with hook rod RIA148993
01-475-3526
Access General Purpose Door
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. door assembly splash guards on each side end
01-475-3527
Access Door Hinge
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23.
01-475-3528
Mounting Bracket
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. pad paint iaw mil-c-53072 using finish 20.24 of mil-std-171: RIA148935-1, color 686a tan, color chip 33446 of fed-std-595
01-475-3534
Double Angle Bracket
Used on 2350-01-432-1526; armored reconnaissance-airborne assault vehicle; fighting vehicle systems,bradley. double angle
01-475-3582
Mounting Bracket
Used on 2350-01-432-1526; armored reconnaissance-airborne assault vehicle; fighting vehicle systems,bradley. 27.750" overall length 14.620" overall width bracket, mounting, sincgars radio
01-475-3588
Mounting Bracket
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. deck plate, 4 inch diameter, threaded apply finish 5.3.2.3 of mil-std-171, then paint iaw mil-c-53072 using finish 20.24 of mil-std-171. do not paint threads. color as follows: RIA148748-1, color 686a tan, color chip 33446 of fed-std-595, RIA148748-2, color 383 green, color chip 34094 of fed-std-595
01-475-3603
Retaining Bail
Used on forward repair system (frs) model m7 nsn: 4940-01-463-7940, tm 9-4940-361-23. clamp, bail guard apply finish 5.2.3.2 of mil-std-171, then paint iaw mil-std-c-54072 using finish 20.24 of mil-std-171, inject primer into unwelded/intermittent welded seams, before applying top coat: RIA148765-1, color 686a tan, color chip 33446 of fed-std-595, RIA148765-2, color 383 green, color chip 34094 of fed-std-595 rectangular
01-475-3619
Mounting Plate
Used on contractor logistics lifetime support (crls), hydraulic excavator type 1 (hyex) (model 230 lcr hx1), nsn 3805-01-463-0804, tm5-3805-280-24-p.
01-475-3622
Loop Clamp
Used on HMMWV. t-bolt
01-475-3650
Webbing Strap
Used on HMMWV. tree saver 2-ply
01-475-3659
Mounting Bracket
Used on 2350-01-432-1526; armored reconnaissance-airborne assault vehicle; fighting vehicle systems,bradley. 13.500" overall length 9.750" overall width bracket, mounting, ration heater assembly made from p/n: 12466061-1/plate, one each; 12466061-2/plate, one each; 12466061-3/support, two each; 12466061-4/plate, one each; 12466061-5/plate, one each; 12466061-6/plate, one each; 12466061-7/cushion, one each; 12385303/marker, one each
01-475-3669
Angle Bracket
Used on contractor logistics lifetime support (crls), hydraulic excavator type 3 (hyex) (model 330 lcr hx3), nsn 3805-01-463-0805.
01-475-3670
Resilient General Purpose Mount
Used on contractor logistics lifetime support (crls), hydraulic excavator type 3 (hyex) (model 330 lcr hx3), nsn 3805-01-463-0805.
01-475-3677
Mounting Bracket
Used on contractor logistics lifetime support (crls), hydraulic excavator type 3 (hyex) (model 330 lcr hx3), nsn 3805-01-463-0805.
