00-038-2485
Threaded Spacing Standoff
Left internal
00-038-2570
Threaded Spacing Standoff
Anodize surface treated left internal
00-038-3972
Synchro Clamp
0.120" hole diameter passivate surface treated
00-038-4016
Angle Bracket
Angle
00-038-4021
Angle Bracket
Angle
00-038-4044
Angle Bracket
00-038-4094
Rod End Clevis
2a rod connection thread class left-hand rod connection 2.625" rod connection thread length 0.500" hole diameter 1.000" overall width passivate surface treated clevis unc rod connection thread series
00-038-4097
Turnbuckle
Zinc surface treated unc body thread series
00-038-4099
Turnbuckle
1b body thread class zinc surface treated unc body thread series
00-038-4118
Retaining Strap
Passivate surface treated
00-038-4308
Compression Cup
0.255" overall length 0.190" center hole diameter
00-038-4311
Spring Holder
00-038-5801
Turnbuckle
2b body thread class unc body thread series
00-038-5804
Turnbuckle Body
2b body thread class 60 deg. v groove located 0.438 in. on left hand thd end cadmium surface treated unc body thread series
00-038-5828
Rod End Clevis
00-038-6654
Loop Clamp
0.380" overall width 0.032" material thickness anodize band surface treated offset mount
00-038-6657
Loop Clamp
0.380" overall width 0.032" material thickness anodize band surface treated offset mount
00-038-7239
Turnbuckle
2b body thread class cadmium or zinc surface treated unc body thread series
00-038-7240
Turnbuckle
2b body thread class cadmium or zinc surface treated unc body thread series
00-038-7297
Butt Hinge
30.820" overall length butt
00-038-7669
Spring Tension Clip
0.128" hole diameter 0.016" material thickness cadmium surface treated
00-038-7675
Loop Clamp
0.375" overall width 0.062" material thickness anodize surface treated center mount
00-038-7790
Helical Compression Spring Seat
Anodize surface treated
00-038-7913
Rod End Connector
2a rod connection thread class right-hand rod connection 0.164" rod connection thread length insert no. MS21208-C0810 in rod end anodize surface treated unc rod connection thread series
00-038-8537
Protective Dust And Moisture Cap
00-038-8568
Retaining Band
00-038-9206
Rod End Connector
00-038-9661
Loop Clamp
0.360" overall width 0.029" material thickness offset mount
00-039-0397
Solid Plain Disk
00-039-0909
Angle Bracket
Oxide film surface treated angle
00-039-4996
Solid Plain Disk
00-039-6180
Angle Bracket
Second end hole 3/8 in. 16 thds per in. angle
00-039-6189
Webbing Strap
00-039-6454
Resilient General Purpose Mount
Cadmium holder surface treated round spring compression four-hole flange
00-039-6768
Mounting Bracket
Steel, 12.625 in.approx lg, 3.250 in.approx h, 8.250 in.w welded construction
00-039-6883
Access Cover
0.406" hole diameter 4.000" outside diameter
00-039-7201
Access Cover
4.000" inside diameter 0.312" hole diameter 4.625" outside diameter
00-039-7278
Helical Compression Spring Seat
1.7460" bore diameter not casehardened seat
00-039-7336
Angle Bracket
Angle
00-039-8409
Access Cover
0.154" hole diameter
00-039-8419
Synchro Clamp
Zinc or zinc surface treated
00-039-8487
Angle Bracket
Angle
00-039-8762
Access Cover
0.344" hole diameter
00-039-8914
Access Cover
0.406" hole diameter 3.375" outside diameter
00-039-8925
Manual Control Lever
Jused on parking brakes as a fastening device, set consists of body assembly 19207-7419538, insert 19207-7419526, roller 19207-7419524, sleeve 19207-7419525, trigger assembly 19207-7984184, and a rivet 19207-7419521,
00-039-8942
Mounting Bracket
Consist of:plate, mounting, fscm 19207, p/n 7358209; clamp, left hand, fscm 19207, p/n 7358207; clamp, right hand, fscm 19207, p/n 7358249; four (4) brackets, fscm 19207, p/n 7358208; four (4) screws, fscm 96906, p/n MS35291-034; four (4) washers, fscm 96906, p/n MS27183-13
00-039-8982
Loop Clamp
3.000" overall width 0.125" material thickness enamel surface treated center mount
00-039-8989
Lock-release Lever
Used on 2350-00-582-5595. 2 drilled holes, 1 oval hole 0.531 in. lf; 0.406 in. w, 1 hole 0.250/0.252 in dia, csk 0.312 in. lg phosphate manganese or phosphate zinc surface treated
