00-346-7694
Mending Plate
2.984" overall length 2.109" overall width 0.059" material thickness tin surface treated rectangular
00-346-7695
Threaded Spacing Standoff
0.562" left internal (includes thru thread) thread length opposite end also internally threaded 0.159 (no. 2) drill 0.406 in.deep to 0.190 (no.10) -32 nf-2b 0.312 in.deep left internal thread
00-346-8074
Sealing Plug Assembly
Used on 105mm,m60; m60a1 w/o aos; 105mm m60a1 w/aos; 105mm,m48a5; range finderm17a1; m60a1r w/o p; m60a1r w/p. item consists of boot 8585531; ring 8201653; ring 8585525
00-346-8128
Access Cover
0.156" hole diameter optional material: copper alloy 170 primer surface treated
00-346-8157
Lock-release Lever
Item is 1.218 in.lg; 0.250 in.h; 0.187 in.w at first end; 0.624 in.dia at second end; one hole 0.1875 in.dia, 0.210 in.deep-no.51 (0.067) drill, spot to depth of drill point for 0.078 (no.610) , taper pin when assembling; hole center located 0.312 in.from second end anodize surface treated
00-346-8171
Access Cover
Used on 1290-00-614-0008 m2a2 aim circle. c/o cover, pn 8211735; keeper (2) , pn 8211742; rivet, pn (8) MS20470-DD3-5
00-346-8176
Retaining Strap
3.062" overall length 0.875" overall width 0.032" material thickness enamel surface treated saddle arch
00-346-8177
Access Cover
C/o plate, pn 8211758; stud, pns 8211685 anodize surface treated
00-346-8178
Mounting Bracket
Material: brass alloy 836; dimensions: length 0.844 inch, heigth 0.562 inch, width 0.500 inch; dovetailed on bottom; hole drilled 0.563 inch lengthwise
00-346-8180
Retaining Strap
7.000" overall length
00-346-8314
Test Adapter
12.000" overall length 10.000" overall width
00-346-8625
Access Cover
Irregular shaped
00-346-8726
Synchro Clamp
0.096" hole diameter two mounting holes 0.625 in. center to center
00-346-8957
Spring Holder
00-346-9036
Access Cover
0.2090" hole diameter 4.000" outside diameter two holes 0.344 in. dia
00-346-9105
Threaded Spacing Standoff
0.625" left internal (includes thru thread) thread length knurled full length left internal thread
00-347-0367
Angle Bracket
Nickel surface treated angle
00-347-1110
Rod End Clevis
3a rod connection thread class right-hand rod connection 0.940" overall width clevis unf rod connection thread series
00-347-2312
Friction Catch Stud Receptacle
0.438" overall width 0.022" material thickness holw dia 0.908/0.108 in, ; o/a hgt 0.230/0.250 in.; lgth 0.969 in. nom zinc surface treated
00-347-2627
Spring Tension Clip
0.022" material thickness cadmium surface treated
00-347-4630
Radio Receiver Support
00-347-4946
Helical Compression Spring Seat
First step flatted 0.600 in. across flats; id 0.250 in.; 2 holes 0.050 to 0.070 in. to dp of 0.080 to 0.100 in. seat
00-347-6531
Retaining Strap
3.380" overall length 0.440" overall width 0.250" material thickness matl thk on mounting tabs only; inside arch both edges chamfered 45 deg; clamps thermostat, stabilizer trim mechanism curved arch
00-347-6560
Manual Control Lever
Used on aircraft model c135.
00-347-6561
Manual Control Lever
Used on aircraft model c135.
00-347-6562
Manual Control Lever
Used on aircraft model c135.
00-347-7476
Mounting Plate
Test
00-347-8167
Helical Compression Spring Seat
00-347-8332
Spring Tension Clip
0.137" hole diameter 0.020" material thickness cadmium surface treated
00-347-8576
Loop Clamp
0.500" overall width 0.020" material thickness offset mount
00-347-8847
Rod End Clevis
2a rod connection thread class right-hand rod connection 1.000" rod connection thread length clevis unf rod connection thread series
00-347-9101
Angle Bracket
00-348-0181
Bow Handle
3b thread class 4.657" overall length oval crosssection 0.281 in. thick by 0.625 in. w anodize surface treated unc thread series
00-348-0348
Access Cover
0.210" hole diameter
00-348-0387
Spring Holder
Passivate surface treated
00-348-0467
Spring Holder
00-348-1650
Helical Compression Spring Seat
00-348-2279
Bridge Clamp
0.406" hole diameter 4.125" overall length 0.750" overall width
00-348-2295
Helical Compression Spr Retainer
Passivate surface treated parallel
00-348-3028
Shimmy Damper
00-348-3132
Loop Clamp
0.750" overall width 0.032" material thickness cadmium band surface treated rectangular
00-348-3197
Helical Compression Spring Seat
0.3750" bore diameter seat
00-348-4405
Threaded Spacing Standoff
Internally threaded full length
00-348-4407
Threaded Spacing Standoff
Left internal
00-348-4414
Helical Compression Spring Seat
Passivate surface treated
00-348-4636
Threaded Spacing Standoff
0.052" right external thread length 48 right external thread quantity per inch projection both ends right external thread unf right external thread series
