01-467-3774
Mounting Bracket
Used on mech copm ass. 3.380" overall length 0.750" overall width
01-467-3808
Bumper
Used on apache ah 64d helicopter.
01-467-3856
Threaded Rod End
Used on KDC-10. use on ASH0011-503; controls-pwr plant throttle
01-467-3873
Retaining Clip
01-467-3875
Retaining Clip
01-467-3893
Expansion Plug
01-467-4130
Angle Bracket
Atm isolator mount, left side finish gold alodine gold surface treated angle
01-467-4152
Helical Compression Spr Retainer
01-467-4153
Angle Bracket
01-467-4157
Mounting Bracket
Used on an/aar-445im. 2.750" overall length 0.220" overall width
01-467-4170
Drawer Extension Slide Section
Used on F16. 1 - piece
01-467-4262
Drawer Extension Slide Section
Used on F16. 1 - piece
01-467-4265
Angle Bracket
Used on winch assy,po.
01-467-4271
Retaining Strap
01-467-4385
Mounting Bracket
Used on positioner,va-logix 1400.
01-467-4413
Retaining Clamp Assembly
Used on bell helicopter model 412. clamp
01-467-4434
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4435
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4436
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4437
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4438
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4439
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4440
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4441
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4442
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4443
Flush Catch
Used on aircraft, mcdonnell douglas corp, model kdc-10.
01-467-4457
Bow Handle
2.914" overall length threads to be free of paint after finishing, 2 additional drilled holes, each 0.136 in. dia, center to center distance between holes 2.594 enamel surface treated unf thread series
01-467-4527
Access Cover
Used on ch-53gs helicopter.
01-467-4528
Access Cover
Used on ch-53gs helicopter.
01-467-4534
Access Cover
Used on ch-53gs helicopter.
01-467-4561
Protective Dust And Moisture Cap
01-467-4657
Mounting Bracket
Used on striker,xm707. 8.500" overall length 3.750" overall width bracket assy-plgr 2 holes in center diameter 0.293
01-467-4669
Spring Tension Clip
0.221" hole diameter 0.420" material thickness clip, retaining, lock handle flat concave
01-467-4714
Protective Dust And Moisture Cap
Molded of type 6/6 nylon. astm d-4066-82, item is black, mounting hole diameter .500 in, thickness .125 inch, head diameter .578 in., height .406 in., head thickness .062 in.
01-467-4717
Angle Bracket
Used on striker. support, bracket, vms angle
01-467-4870
Loop Clamp
Used on C-17. 1.000" overall width 0.063" material thickness the material for the band is ST0631, steel composition two piece
01-467-4948
Access Cover
Used on 2320011231610, light armored vehicle.
01-467-4998
Nut And Bolt Retainer
Used on filters, submarine engineering and diesel systems, seawolf.
01-467-4999
Loop Clamp
Mounting bar included with dimensions 0.25X0.5X2.5 offset mount
01-467-5015
Manual Control Handle
Used on filters, submarine engineering and diesel systems, seawolf.
01-467-5024
Bridge Clamp
0.343" hole diameter 4.500" overall length 0.625" overall width 0.438" material thickness 4 sides chamfered at 45 degrees flat
01-467-5057
Mounting Bracket
Used on 2320011231610, light armored vehicle.
01-467-5170
Manual Control Handle
Used on 1134 mission crew seat; 31218 ami industries.
01-467-5191
Butt Hinge Leaf
Used on B1B. 2.250" overall length knuckle to knuckle distance 0.380 to 0.383 in.; original dwg name-hinge assy access doors fuslage XF84375, YF899.500 to YF932.000 butt blank
01-467-5241
Mounting Bracket
01-467-5249
Mounting Bracket
01-467-5257
Mounting Bracket
01-467-5258
Mounting Bracket
Used on f414-400 engine. bracket, main manifold - ab
