00-321-6431
Retaining Strap
6.093" overall length 0.875" overall width 0.119" material thickness paint surface treated irregular arch
00-321-6432
Retaining Strap
6.094" overall length 0.875" overall width 0.1196" material thickness enamel gloss surface treated irregular arch
00-321-6433
Butt Hinge Leaf
5.737" overall length 0.179" material thickness butt staggered holes
00-321-6437
Webbing Strap
00-321-6481
Loop Clamp
1.250" overall width 0.500" material thickness 18 thread quantity per inch single loop
00-321-9003
Rod End Clevis
00-321-9004
Threaded Rod End
3b thread class right-hand 0.560" rod connection thread length 1.930" overall length one drilled hole thd end 0.069 in. min 0.074 in. max dia 0.460 in. from thd end to drilled hole center cadmium surface treated external thread, flanged, tubular end unjf rod connection thread series
00-321-9072
Bow Handle
2a thread class 4.671" overall length folding handle furnished w/2 nuts nickel surface treated unf thread series
00-321-9119
Threaded Spacing Standoff
00-321-9159
Expansion Plug
0.0598" material thickness err default
00-321-9289
Turnbuckle Body
3b body thread class 5/16 in. h by 5/8 in. w of wrenching facility centrally located; 9/16 in. dia of round sleeve unf body thread series
00-321-9303
Turnbuckle Body
2b body thread class 1-1/4 in. w across hex flats, 1/2 in. lg by 7/8 in. dia internally relieved between right hand unc body thread series
00-321-9772
Swivel Caster
Swivel offset
00-322-0117
Retaining Strap
0.820" overall length 0.150" overall width 0.100" material thickness passivated mil-f-14072 finish E300 surface treated
00-322-0136
Retaining Strap
4.440" overall length 0.500" overall width 0.064" material thickness passivate surface treated saddle arch
00-322-0629
Shimmy Damper
Used on 4310-00-878-1905. emalleable iron housing, cast iron ring, 10.860 in.min, 10.875 in.max od, 6.031 in.min, 6.046 in.max id, 2.078 in.o/a lg, 3.750 in.min, 3.752 in.max internal flange id, 6 holes 0.531 in.min, 0.541 in.max dia;
00-322-2156
Flush Catch
Cadmium surface treated flush lever actuator
00-322-2197
Solid Plain Disk
00-322-2217
Rod End Connector
Used on eng j-57.
00-322-2777
Loop Clamp
0.375" overall width 0.219" material thickness 32 thread quantity per inch single loop
00-322-3969
Rod End Clevis
00-322-4170
Angle Bracket
00-322-4328
Threaded Spacing Standoff
Projection both ends right external thread
00-322-4554
Threaded Spacing Standoff
2b left internal (includes thru thread) 2a right external thread class right-hand left internal (includes thru thread) 0.344" right external thread length 48 left internal (includes thru thread) thread quantity per inch unf left internal (includes thru thread) thread series
00-322-4629
Spring Tension Clip
0.112" hole diameter 0.032" material thickness
00-322-5497
Strap Fastener Loop
Footmans loop
00-322-5634
Double Angle Bracket
Center section has one 0.169 in. min, 0.173 in. ax dia hole enamel semigloss surface treated double angle
00-322-8471
Bumper
0.156" hole diameter
00-322-8760
Access Cover
Anodize surface treated
00-322-8810
Threaded Spacing Standoff
00-322-9488
Spring Tension Clip
0.264" hole diameter 0.0209" material thickness phosphate surface treated
00-322-9527
Threaded Spacing Standoff
0.469" left internal (includes thru thread) thread length knurled outer surface zinc surface treated left internal thread
00-322-9656
Drawer Extension Slide
00-323-0961
Spring Holder
00-323-1368
Loop Clamp
0.625" overall width 0.062" material thickness chromate band surface treated right hand clamp & bracket
00-323-1540
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
00-323-1638
Vent Plug
Color blue anodize surface treated
00-323-1969
Loop Clamp
0.500" overall width 0.020" material thickness single loop
00-323-2301
Bridge Clamp
0.500" hole diameter chamfer corners 0.031 in. by 45 degrees flat
00-323-2308
Spring Tension Clip
0.166" hole diameter enamel surface treated
00-323-2313
Door Handle
3.360" overall length 0.720" overall width
00-323-2426
Spring Tension Clip
Clip, u phosphate surface treated
00-323-2439
Loop Clamp
0.500" overall width 0.051" material thickness rectangular
00-323-4926
Rod End Clevis
0.374" hole diameter 1.250" overall width clevis
00-323-5905
Angle Bracket
Cadmium surface treated angle
00-323-6087
Double Angle Bracket
0.219 in. dia hole in center section, 0.219 in. distance from edge to hole ctr along w, 0.312 in. distance from hole ctr to edge of second leg along lg double angle
