01-436-2609
Manual Control Lever
01-436-2630
Butt Hinge
19.0000" overall length 0.0550" material thickness there is a second set of 11 holes with a min. 0.2040 in. butt
01-436-2642
Catch Strike
0.7000" overall length 0.7200" overall width 0.0650" material thickness passivate surface treated mortise
01-436-2702
Double Angle Bracket
Anodize surface treated adjacent angles
01-436-2729
Mounting Bracket
8.8800" overall length 0.9600" overall width passivate surface treated
01-436-2738
Mounting Bracket
1.0000" overall length 0.9600" overall width passivate surface treated
01-436-2857
Protective Dust And Moi Cap-plug
Used on hydraulic pump and motor.
01-436-2858
Protective Dust And Moi Cap-plug
Used on hydraulic pump and motor.
01-436-2863
Synchro Clamp
0.099" hole diameter 0.245" outside diameter 0.052" material thickness passivate surface treated round
01-436-2886
Helical Compression Spr Retainer
Used on pacer dawn. submitted name was retainer, s/a 1st st
01-436-3192
Self-locking Insert
0.875" overall length
01-436-3193
Swivel Caster
Swivel offset
01-436-3194
Swivel Caster
Swivel offset
01-436-3207
Loop Clamp
0.375" overall width 0.050" material thickness single loop
01-436-3208
Loop Clamp
0.375" overall width 0.050" material thickness single loop
01-436-3266
Access Door Hinge
8.0000" overall length 0.3000" material thickness
01-436-3275
Access Door Hinge
8.0000" overall length
01-436-3287
Access Door Hinge
5.0000" overall length
01-436-3296
Access Cover
Chromate surface treated
01-436-3304
Access Door Hinge
5.0000" overall length 0.2500" material thickness
01-436-3341
Access Cover
5.9000" outside diameter anodize surface treated
01-436-3384
Angle Bracket
Anodize surface treated angle
01-436-3409
Angle Bracket
The item is opposite of part number 3141AS425-1 anodize surface treated angle
01-436-3429
Mounting Plate
Anodize surface treated
01-436-3479
Engine Plate
Used on cfm-56 aircraft engine.
01-436-3525
Mounting Plate
Anodize surface treated
01-436-3531
Door Handle
4.2080" overall length anodize surface treated
01-436-3535
Lock-release Lever
01-436-3536
Mounting Plate
Anodize surface treated
01-436-3537
Mounting Plate
There is a second set of 8 holes with dia. 0f 0.203 in. min. anodize surface treated
01-436-3715
Angle Bracket
Angle
01-436-3720
Door Handle
2b thread class right-hand 3.000" overall length paint surface treated unf thread series
01-436-3723
Block Section Clamp
01-436-3739
Mounting Bracket
9.440" overall length 4.380" overall width
01-436-3740
Mounting Bracket
01-436-3763
Loop Clamp
0.625" overall width 0.051" material thickness passivate band surface treated offset mount
01-436-3922
Protective Dust And Moistur Plug
01-436-4137
Plain Snap-in Standoff
Used on preprovisioning support navicp is poe.
01-436-4161
Retaining Clip
Used on special tool and support equip. rope clip
01-436-4294
Cushioning Pad
01-436-4340
T Bracket
2.320" overall length 2.320" overall width center projection
01-436-4341
Turnbuckle Body
2b attachment thread class right-hand body unf body thread series
01-436-4346
Manual Control Handle
Used on w/s: aircraft, hornet f/a-18. 7.500" overall length
01-436-4347
Drawer Extension Slide Section
01-436-4348
Drawer Extension Slide Section
Anodize slide surface treated 2 - piece pivoting
01-436-4350
Mounting Plate
Used on 2320-01-371-9583 1 1/4 ton truck vehicale system. lower front ramp block
