00-030-0217
Bow Handle
4.375" overall length unc thread series
00-030-0478
Threaded Spacing Standoff
Groove located on unthreaded projection 0.640 in. min 0.641 in. max from end to groove center line projection both ends right external thread
00-030-0990
Helical Compression Spring Seat
0.3750" bore diameter seat
00-030-2101
Threaded Spacing Standoff
3b left internal (includes thru thread) 3a right external thread class right-hand left internal (includes thru thread) 32 left internal (includes thru thread) thread quantity per inch shoulder length 0.724-0.728 in., shoulder width 0.668-0.678 in., nut end shank dia 0.185-0.187 in. cadmium standoff surface treated unjf right external thread series
00-030-7044
Protective Dust And Moisture Cap
00-030-7390
Dirt And Liquid Deflector
0.594" inside diameter 0.750" outside diameter 0.031" material thickness
00-030-8372
Threaded Spacing Standoff
0.026 in. min 0.036 in. max dia hole through pin axial center, 0.094 in. tap drill to depth shown left internal
00-030-8374
Threaded Spacing Standoff
0.314 in. min 0.324 in. max dia hole through pin axial unthreaded portion left internal thread
00-030-8475
Leather Strap
Screw attached, 1/4-20 nc thd size
00-030-8482
Hand Crank
Mtg facility unthd mtg holes; handle mtg method bolt
00-030-8692
Spring Holder
00-030-9131
Dust And Moisture Seal Boot
1.000" material thickness thru-hole, expandable
00-030-9585
Retaining Strap
2.380" overall length 0.480" overall width 0.045" material thickness curved arch
00-030-9787
Protective Dust And Moisture Cap
2b thread class
00-031-0416
Loop Clamp
0.500" overall width 0.0285" material thickness cadmium band surface treated single loop
00-031-0489
Spring Tension Clip
0.009" material thickness cadmium surface treated
00-031-0521
Loop Clamp
0.490" overall width 0.045" material thickness color natural single loop
00-031-0523
Protective Dust And Moisture Cap
Yellow color
00-031-0601
Protective Dust And Moistur Plug
Color gold anodize surface treated
00-031-0658
Straight Headless Rod
00-031-0862
Threaded Spacing Standoff
Left internal
00-031-0897
Bumper
0.168" hole diameter
00-031-0898
Bumper
0.168" hole diameter
00-031-1040
Solid Plain Disk
00-031-1305
Loop Clamp
2.000" overall width double t-bolt
00-031-1583
Retaining Clip
00-031-1672
Angle Bracket
Angle
00-031-2276
Hand Crank
0.250" inside diameter
00-031-3115
Loop Clamp
1.390" overall width 0.040" material thickness anodize band surface treated
00-031-3117
Loop Clamp
1.390" overall width 0.040" material thickness anodize band surface treated hinged & center mtd
00-031-3493
Rod End Clevis
2b rod connection thread class right-hand rod connection 0.380" rod connection thread length 0.125" hole diameter 0.310" overall width oxide surface treated clevis unf rod connection thread series
00-031-3497
Mounting Bracket
Steel per qq-s-766 type 301, 1/2 hard, passivate per mil-std-171 finish no. 5.4.1, 0.014 in. to 0.018 in. material thickness
00-031-4070
Electronic Equipmen Hardware Kit
00-031-4183
Rod End Connector
Used on w/s: ta-4j aircraft. 3b rod connection thread class right-hand rod connection 0.781" rod connection thread length connector unf rod connection thread series
00-031-5412
Helical Compression Spr Retainer
00-031-5490
Spring Tension Clip
0.143" hole diameter 0.024" material thickness cadmium surface treated
00-031-6307
Protective Dust And Moisture Cap
3b thread class cadmium surface treated
00-031-6363
Angle Bracket
Angle
00-031-6425
Corner Brace
Used on bracket-inlet pressure to fuel control tube. 0.087" material thickness cadmium surface treated triangle
00-031-6444
Double Angle Bracket
Adjacent angles
00-031-6462
Double Angle Bracket
Hardness rockwell C32 to C38 cadmium surface treated double angle
00-031-7720
Spring Tension Clip
00-031-9036
Retaining Clip
Oxide surface treated pin
00-032-0087
Retaining Strap
0.453" overall length 0.188" overall width 0.020" material thickness curved arch
