01-385-5931
Lock-release Lever
Used on an/psq-7.
01-385-6027
Angle Bracket
1st leg bent 30 deg passivate surface treated angle
01-385-6029
Rod End Clevis
01-385-6059
Mounting Plate
01-385-6062
Mechanic Equipment Hardware Kit
01-385-6079
Double Angle Bracket
Used on s85-avu-8c/a. length is 0.500, width 0.155, slot is 0.036, hole 0.0160
01-385-6089
Nut And Bolt Retainer
Spline wrench per MS33787-10 0.250 size pacer dawn cadmium surface treated
01-385-6091
Mechanical Stop
Used on pacer dawn.
01-385-6098
Access Cover
Used on pacer dawn.
01-385-6154
Clamping Catch
01-385-6163
Threaded Spacing Standoff
2b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) 0.375" left internal (includes thru thread) thread length 0.150" hole diameter 40 left internal (includes thru thread) thread quantity per inch nickel surface treated projection one end left internal thread unc left internal (includes thru thread) thread series
01-385-6170
Retaining Strap
48.220" overall length 1.000" overall width 0.059" material thickness 2this strap assembly consist of 2 angles (12386958-1) , located on each end with a mounting slot centrally located on the leg, the is 0.438 in. wide by 1.000 in. long, these legs have a thickness of 0.179; welded between the two legs is a plate zinc surface treated u
01-385-6178
Access Cover
0.3600" hole diameter
01-385-6215
Spring Holder
Used on gy4000 aircraft multiple disc brakes;pacer dawn.
01-385-6228
Protective Dust And Moisture Cap
01-385-6235
Mounting Plate
01-385-6287
Access Cover
Used on pacer dawn.
01-385-6292
Access Cover
Used on pacer dawn.
01-385-6318
Mounting Plate
3.9950" outside diameter
01-385-6334
Angle Bracket
Includes three clip, spring tensions on second leg angle
01-385-6374
Mounting Plate
01-385-6383
Manual Control Handle
01-385-6465
Angle Bracket
Used on boeing chinook, d model, mk2.
01-385-6476
Mounting Plate
Used on joint tactial information distrubition system.
01-385-6524
Mounting Plate
Used on joint tactial information distrubition system.
01-385-6558
Bow Handle
Used on joint tactial information distrubition system.
01-385-6577
Instrument Mounting Clamp
Used on boeing chinook, d model, mk2.
01-385-6695
Mounting Plate
Chromate surface treated
01-385-6713
Helical Compression Spring Seat
01-385-6715
Mounting Plate
3.250" outside diameter chromate surface treated
01-385-6723
Protective Dust And Moistur Plug
01-385-6755
Mounting Bracket
2.750" overall length 2.130" overall width 2 additional holes 0.203 in. dia
01-385-6765
Loop Clamp
1.500" inside diameter 1.000" overall width
01-385-6772
Angle Bracket
1st leg mtg holes thd 0.112-40 unc-2b; 2nd leg slots on angle of 38 deg anodize surface treated angle
01-385-6787
Angle Bracket
Edge cutout 6.900 in lg by 1.350 in wd anodize surface treated angle
01-385-6793
Double Angle Bracket
01-385-6813
Mounting Plate
01-385-6858
Access Cover
Mounting: two 0.740 in. wide slots spaced on 16.630 in. centers; source of supply is limited to hewlett-packard co due to design control; groove along width are where the slots are, one on each end; vent holes on top on item chromate surface treated
01-385-6865
Block Section Clamp
3.340" overall length 0.870" overall width thd insert right end 0.312-24-unf anodize surface treated rectangular
01-385-6891
Double Angle Bracket
