01-385-4511
Threaded Spacing Standoff
3a right external thread class right-hand right external 1.400" right external thread length 16 right external thread quantity per inch unjf right external thread series
01-385-4550
Double Angle Bracket
2 mtg holes ctr section 0.406 in. nom dia paint surface treated adjacent angles
01-385-4557
Synchro Clamp
01-385-4565
Mechanical Stop
Used on pacer dawn. original item name sleeve-mech stop
01-385-4571
Threaded Spacing Standoff
3a left external thread class right-hand left external 1.400" left external thread length 16 left external thread quantity per inch unjf left external thread series
01-385-4596
Angle Bracket
2 nut plates 2st leg; 3 holes 0.204 in. dia anodize surface treated angle
01-385-4623
Bumper
Wedge shaped; length 1.550"; width .245"; height .280"; unthreaded thru hole .185 inch min dia. anodize surface treated
01-385-4628
Mounting Plate
Chromate surface treated
01-385-4629
Mounting Plate
Cadmium surface treated
01-385-4644
Mounting Plate
Chromate zinc surface treated
01-385-4674
Angle Bracket
Angle
01-385-4675
Synchro Clamp
2 mounting holes 0.203 thru 0.420 by 82 degrees; 1.045 in. TO1.049 in. center to center distance between mounting holes
01-385-4680
Synchro Clamp
01-385-4787
Protective Dust And Moisture Cap
Used on a MK2 helicopter
01-385-4850
Protective Dust And Moisture Cap
01-385-4946
Expansion Plug
Used on a MK2 helicopter
01-385-4963
Lock-release Lever
01-385-5006
Retaining Strap
01-385-5105
Mounting Bracket
01-385-5167
Plain Snap-in Standoff
Snap-in
01-385-5184
Mounting Plate
Used on s70b-2 seahawk helicopter.
01-385-5190
Expansion Plug
Used on a MK2 helicopter
01-385-5207
Expansion Shield
1.56 in (3.96 cm) long; size 3/8 in (0.95 cm) ; 1/2 in ( (1.27 cm) hilti drill bit diameter, allowable working loads, 4000 psi concrete, tension 1240 lbs (562.5 kg) , shear 1060 lbs (480.8 kg) straight
01-385-5316
Access Door Hinge
Used on pacer special.
01-385-5372
Access Cover
Used on f-14 aircraft.
01-385-5373
Mechanical Stop
Used on pacer dawn. original item name cap-mech stop
01-385-5532
Threaded Spacing Standoff
32 left internal (includes thru thread) thread quantity per inch flanged with left internal thread unc left internal (includes thru thread) thread series
01-385-5548
Multiple Angle Bracket
01-385-5577
Mounting Plate
Spring clip tension attached at top end by rivets
01-385-5584
Mounting Plate
3.9950" outside diameter
01-385-5587
Block Clamp
0.500" overall width anodize surface treated rectangular
01-385-5597
Access Cover
3.9950" outside diameter
01-385-5603
Angle Bracket
Anodize surface treated angle
01-385-5608
Spring Holder
01-385-5616
Clamping Catch
01-385-5645
Quick Release Plunger
2a thread class right-hand 0.875" thread length 13 thread quantity per inch nylon thd lock patch incl unc thread series
01-385-5653
Access Cover
Used on p-3b aircraft. used on ky-58 electronics rack
01-385-5654
Angle Bracket
Used on pacer dawn. hole size 0.555 to 0.561 angle
01-385-5721
Mounting Plate
10 mounting holes are 0.220 to 0.227 in. w/nine holes csk 0.625 in. deep; 1 hole w/dia 0.256 to 0.258 in., 2 holes w/dia 0.252 to 0.253 in. anodize surface treated
01-385-5725
Angle Bracket
01-385-5779
Double Angle Bracket
Nut plate MS21062L3 double angle
01-385-5787
Mounting Plate
3.9950" outside diameter
01-385-5830
Mounting Bracket
