01-379-9581
Support Hook
3-mounting holes have a 0.182 in. dia passivate or passivate surface treated
01-379-9633
Support Hook
This item consist of four mounting holes, 3-0.182 in. dia passivate or passivate surface treated
01-379-9675
Access Cover
Two ears with holes along width
01-379-9699
Retaining Strap
01-379-9751
Mounting Bracket
01-379-9762
Access Cover
Mounting holes 15 with a dia of 0.104 in.
01-379-9805
Access Cover
Total mounting holes = 18, 15 are 0.104 in. dia
01-379-9854
Swivel Caster
Swivel offset
01-379-9855
Mounting Bracket
Two clinch nuts (p/n MS3214-4) with 0.112-40 unc-2b; dwg name-bracket, handle pressed
01-379-9889
Manual Control Handle
01-379-9911
Spring Tension Clip
01-379-9915
Strap Fastener Loop
0.880" overall length rectangle
01-379-9964
Protective Dust And Moisture Cap
01-380-0009
Double Angle Bracket
01-380-0013
Angle Bracket
2 holes 1st leg 0.124 in. min chromate surface treated angle
01-380-0058
Retaining Strap
4.800" overall length 1.400" overall width 0.063" material thickness curved arch
01-380-0071
Mounting Bracket
01-380-0097
Mounting Bracket
01-380-0105
Access Cover
0.088" hole diameter
01-380-0126
Bumper
0.250" hole diameter honeycone sheet attached
01-380-0133
Double Angle Bracket
13 holes both legs anodize surface treated adjacent angles
01-380-0141
Double Angle Bracket
5 mounting holes spaced 3 in. apart centered along c/l line with center of hole .310 in. from each end adjacent angles
01-380-0142
Double Angle Bracket
1 hole both legs 0.360 in. dia anodize surface treated adjacent angles
01-380-0187
Swivel Caster
01-380-0207
Angle Bracket
01-380-0213
Access Cover
Used on f14 acft.
01-380-0224
Retaining Strap
Used on h3 acft. saddle arch
01-380-0245
Access Cover
Used on f14 acft.
01-380-0253
Swivel Caster
01-380-0270
Dust And Moisture Seal Boot
01-380-0301
Swivel Caster
01-380-0621
Mounting Plate
Used on beamformer.
01-380-0667
Strapping
Used on pacer dawn.
01-380-0709
Mounting Bracket
1.250" overall length
01-380-0711
Loop Clamp
0.271" overall width 0.015" material thickness single loop
01-380-0743
Retaining Strap
4.295" overall length 0.685" overall width 0.125" material thickness passivate surface treated straight arch
01-380-0813
Expansion Plug
01-380-0841
Mounting Plate
01-380-1318
Mounting Bracket
Used on 1315-01-216-7071. 5.400" overall length
01-380-1327
Protective Dust And Moisture Cap
01-380-1339
Mounting Bracket
Used on 1315-01-216-7071. 5.400" overall length 1.000" overall width
01-380-1354
Mounting Plate
