01-371-0785
Manual Control Handle
01-371-0802
Solid Metallic Wheel
01-371-0803
Mounting Bracket
Used on dbrite equipment.
01-371-0804
Mounting Bracket
01-371-0805
Mounting Bracket
01-371-0806
Mounting Bracket
01-371-0812
Mounting Plate
01-371-0818
Retaining Clamp Assembly
01-371-0832
Detent Plunger
01-371-0921
Mending Plate
9.000" overall length 1.500" overall width 0.250" material thickness this bar only has one slot rectangular
01-371-0922
Locking Stay
22.000" overall length 5.400" overall width 1.660" material thickness
01-371-0923
Angle Bracket
Trangular aperature 1.500 in. from each side of 2nd leg on radius of 0.380 on each corner angle
01-371-0924
Mounting Bracket
18.000" overall length 1.500" overall width two of the four holes are 0.312 in. min plastic polyamide surface treated
01-371-0925
Mounting Bracket
4.810" overall length 2.540" overall width
01-371-0943
Access Cover
Rubber gasket
01-371-0944
Access Cover
5.250" outside diameter 6the flange consist of four notches 0.650 in. wide equally spaced around the diameter; continuous groove below the flange with a dia. of 4.255 in. anodize surface treated
01-371-0945
Access Cover
5.875" inside diameter 0.105" hole diameter 7.500" outside diameter anodize surface treated
01-371-0946
Access Cover
0.129" hole diameter paint polyurethane surface treated
01-371-0981
Threaded Spacing Standoff
2b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) 1.000" left internal (includes thru thread) thread length 32 left internal (includes thru thread) thread quantity per inch zinc surface treated internally threaded full length unc left internal (includes thru thread) thread series
01-371-1011
Bow Handle
5.750" overall length
01-371-1012
Strap Hinge Leaf
0.125" material thickness 0.160 - 0.165 dia. pin holes (2) in line; 200 lbs min load; mat w/-1, -2, -8, -9, -10 latch assy... strap
01-371-1013
Strap Hinge Leaf
1.500" material thickness altered item strap w/door leaf offset
01-371-1050
Stand Base
4.600" overall length 4.220" overall width
01-371-1077
Helical Compression Spring Seat
01-371-1078
Solid Plain Disk
Chromate surface treated
01-371-1079
Retaining Strap
4.039" overall length 0.750" overall width 0.051" material thickness passivate surface treated saddle arch
01-371-1080
Retaining Strap
9.000" overall length 1.000" overall width 0.075" material thickness this strap weldment also includes 2-nuts-MS51967-5 curved arch
01-371-1087
Retaining Band
01-371-1088
Retaining Band
01-371-1089
Mounting Plate
01-371-1090
Mounting Plate
Chromate surface treated
01-371-1091
Mechanical Stop
3b thread class 1.530" overall length 1.119" overall width 24 thread quantity per inch unc thread series
01-371-1092
Mechanical Stop
308.0mm overall length 129.0mm overall width one mounting hole plate 13mm dia., two mounting holes on bracket 17.5mm dia. plastic surface treated
01-371-1093
Bumper
54.000" overall length 0.125" overall width machine screw additional fastening devices: 2 lug floating anchors, 12 lock nuts, vinyl tape
01-371-1130
Protective Dust And Moisture Cap
01-371-1498
Expansion Plug
01-371-1499
Expansion Plug
01-371-1500
Expansion Plug
01-371-1501
Expansion Plug
01-371-1502
Expansion Plug
01-371-1503
Expansion Plug
01-371-1504
Expansion Plug
01-371-1505
Expansion Plug
01-371-1506
Expansion Plug
01-371-1507
Expansion Plug
01-371-1648
Rod End Clevis
01-371-1659
Mending Plate
01-371-1660
Mending Plate
