01-353-8726
Angle Bracket
01-353-8731
Mounting Plate
01-353-8895
Rod End Clevis
01-353-8914
Retaining Strap
01-353-8915
Retaining Strap
01-353-8916
Retaining Strap
01-353-8917
Retaining Strap
01-353-8918
Retaining Strap
01-353-8955
Protective Dust And Moisture Cap
01-353-8958
Nut And Bolt Retainer
01-353-8959
Angle Bracket
01-353-8960
Angle Bracket
01-353-8961
Angle Bracket
01-353-8964
Nut And Bolt Locking Plate
01-353-8967
Clamping Catch
01-353-8974
Mounting Bracket
01-353-8975
Mounting Bracket
01-353-8976
Mounting Bracket
01-353-8977
Mounting Bracket
01-353-8978
Mounting Bracket
01-353-8979
Mounting Bracket
01-353-8980
Mounting Bracket
01-353-8981
Mounting Plate
01-353-9006
Angle Bracket
Angle
01-353-9007
Double Angle Bracket
Adjacent angles
01-353-9008
Double Angle Bracket
0.7485-0.7505 in. dia hole with 1.50-1.56 in. dia cbore surrounding the hole which is centrally located between the two mounting holes in the second leg; optional material: investment casting, ic-1020 or ic-1030, nomalized, mil-s-22141; apply solid film lubricant per mil-l-46010 as final surface treatment; 0.752-0.762 in.dia hole located in center section cadmium surface treated adjacent angles
01-353-9024
Access Cover
Used on b-2 bomber (atb). 125 microinch finish ; critical fit
01-353-9056
Loop Clamp
0.500" overall width 0.064" material thickness
01-353-9057
Loop Clamp
0.490" overall width 0.032" material thickness chromate band surface treated offset mount
01-353-9058
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-353-9094
Protective Dust And Moistur Plug
01-353-9096
Spring Tension Clip
01-353-9097
Mounting Plate
01-353-9142
Mounting Bracket
Used on pacer dawn. 10.940" overall length 4.940" overall width material thickness 0.125 in.; item requires 1 nut p/n MS51971-5, nut is centered over hole w/dia 0.580 in.; there is a welded piece that has 2 holes, 1 hole has dia of 1.090 to 1.150 in., other hole has dia of 1.350 to 1.410 in., cntr to cntr dist of holes is 1.350 to 1.410 in. passivate surface treated
01-353-9143
Mounting Bracket
Used on pacer dawn. 10.940" overall length 4.970" overall width item requires 2 nuts p/n MS35650-304 passivate surface treated
01-353-9144
Mounting Bracket
Used on pacer dawn. 1.230" overall width
01-353-9145
Mounting Bracket
Used on f-15a/b/e/d. 6.600" overall length 5.250" overall width item is 0.090 in. thk
01-353-9146
Mounting Bracket
Used on an/alq-184(v) ecm pod. 9.000" overall length 4.000" overall width item mounted next to forged ways s on the umbelica assy cadmium surface treated
01-353-9156
Access Cover
Used on an-alq184ecmpod. torque requirements (25-30 in lbs) deleted
