01-340-8922
Assembled Nut Retainer
Used on 2350-01-061-2445 tank,combat,full tr. consisting of: p/N12274643 strap; p/N12274644 strap; p/NMS51967-15 nut
01-340-8977
Spring Holder
01-340-8978
Spring Holder
01-340-8979
Spring Holder
01-340-8987
Retaining Strap
01-340-9114
Angle Bracket
01-340-9115
Angle Bracket
01-340-9116
Angle Bracket
Chromate surface treated angle
01-340-9118
T Bracket
2.000" overall length 13.260" overall width center projection
01-340-9227
Loop Clamp
2.000" overall length 0.750" overall width 0.250" material thickness passivate band surface treated single loop
01-340-9277
Mounting Bracket
Consists of material, steel, comp 1009 per astm A366-85; 18.200 in. long; 0.0598 in. thick; 6.000 in. high left side, 9.600 in. high right side; 2 flanges along length turned in 90.0 deg angle, 1.500 in. high, 2 holes on each flange, 0.310 in. min
01-340-9491
Protective Dust And Moistur Plug
Used on 1550-01-283-9327.
01-340-9492
Protective Dust And Moistur Plug
01-340-9494
Lock-release Lever
Used on release assy,h-53 acft. 0.090 in. thk; slotted hole at one end 0.202 in. w, 0.612 in.lg; one round hole at opposte end 0.105 in. dia; one hole at 1.765 in. from slotted hole on side of lever measures 0.192 in. dia oxide surface treated
01-340-9495
Mounting Plate
Paint surface treated
01-340-9496
Mounting Plate
Paint surface treated
01-340-9497
Synchro Clamp
Used on 1680-01-257-2717 acft seat,ch-53a/d/e acft. 0.178" hole diameter leg to start of clamp radius 0.090 in., inside clamp circumference 0.390 in., matl per qq-a-250/11, 6061-T4, surf treatment per mil-a-8625, type iii, cl 2 anodize surface treated
01-340-9498
Synchro Clamp
0.089" hole diameter oxide surface treated
01-340-9500
Drawer Extension Slide Section
2 mtg holes 0.190 in. dia csk to 0.342 in. min
01-340-9501
Drawer Extension Slide Section
Chromate surface treated
01-340-9502
Drawer Extension Slide Section
01-340-9503
Drawer Extension Slide Section
01-340-9756
Threaded Spacing Standoff
Internally threaded full length
01-340-9757
Threaded Spacing Standoff
Both ends countersunk to 0.020 in.dia left internal
01-340-9924
Angle Bracket
Used on m119a1 howitzer. first leg has two additional holes 0.156 in.dia angle
01-341-0159
Mounting Bracket
Used on pacer special.
01-341-0161
Mounting Bracket
Used on m119a1 howitzer. material:steel; 6.558 in.lg; 5.00 in.w; 2.66 in.h; rockwell hardened to rc 24-31
01-341-0163
Mounting Bracket
Used on m119a1 howitzer. material:steel; 3.39 in.lg; 2.51 in.w; one slot 0.520 in. by 0.780 in.; 2 holes 0.337 in dia; finish:125 microinches
01-341-0204
Access Door Hinge
Used on pacer special.
01-341-0206
Rod End Connector
Hardness critical item, pacer special
01-341-0417
Threaded Spacing Standoff
Nickel surface treated internally threaded full length
01-341-0418
Threaded Spacing Standoff
Passivate surface treated internally threaded full length
01-341-0460
Nut And Bolt Retainer
1.296" overall length 0.670" overall width 0.040" material thickness passivate surface treated
01-341-0461
Helical Compression Spring Seat
01-341-0471
Retaining Strap
4.760" overall length 0.750" overall width 0.190" material thickness two hole single arch
01-341-0473
Catch Strike
Used on pacer special.
01-341-0474
Catch Strike
Used on pacer special.
01-341-0475
Catch Strike
Used on pacer special.
01-341-0477
Friction Catch
Plunger diameter 0.312 in. pressure
01-341-0479
Mechanical Stop
Used on common tank. item c/o bracket-12916833; plate-12916834
01-341-0480
Drawer Extension Slide Section
2 holes 0.190 in. dia csk to 0.342 in. min
01-341-0542
Access Cover
Right hand side; used on navy models f-14a
01-341-0744
Angle Bracket
6 holes angle
01-341-0824
Bow Handle
2a thread class passivate surface treated unf thread series
01-341-0825
Manual Control Handle
2a thread class 1.240" overall length oxide surface treated unf thread series
