01-337-2263
Mounting Bracket
01-337-2447
Access Cover
Used on engine mod series 132200-132299.
01-337-2449
Access General Purpose Door
Right hand door
01-337-2450
Access General Purpose Door
Left hand door
01-337-2562
Loop Clamp
Neoprene liner; temp to 212 deg f; 5/16 nom clamp size passivate surface treated rigid w/threaded bolt hole
01-337-2588
Mounting Bracket
Cognizant service - french air force
01-337-2589
Mounting Bracket
Cognizant service - french air force
01-337-2590
Mounting Bracket
Cognizant service - french air force
01-337-2591
Mounting Bracket
Cognizant service - french air force
01-337-2592
Mounting Bracket
01-337-2593
Mounting Bracket
Used on 7.62mm armament subsy. matl steel, cre, qq-s-766 cl 304 or 304l condtn a, finish no. 2b or 4; or astm-A167, type 304 or 304l cold rolled, finish no. 2b or 4, surf finish passivating 5.4.1 of mil-std-171, matl thk 0.063 in.; item consists of 3 slfkg nut plates p/n MS21076L08, plate hole dia 0.207 in. porm 0.007 in., 6 blind rivets 0.094 in. dia, p/n MS20605ML3W2; item also has 9 slotted openings, width 0.208 in. porm 0.005 in.
01-337-2594
Mounting Bracket
Used on f-15 aircraft. matl aluminum alloy qq-a-367 cond T73, surface treatment anodized per PS13201 type 2 CL1; oa lg 1.135 in., oa width 1.650 in.; item has 2 holes dia 0.1635 to 0.1637 in. that mates w/68A327105
01-337-2595
Mounting Bracket
Used on f-15 acft. 3.000" overall length 2.040" overall width kmatl thickness 0.063 in.; 1st leg mates w/68A113003 (no mtg holes) , 2nd has unthreaded mtg holes, 1 hole mating w/68A113026, 68A113027 & 68A113014 & 1 hole mating w/68A113014 & 68A113026; item is the rt hnd brkt
01-337-2596
Mounting Bracket
Used on 7.62 armament subsy. matl al alloy qq-a-250/11, 6061 T6, surf finish chemical film 7.3.3 of mil-std-171; item has 4 holes for 0.093 dia rivets (cskh) , p/n MS20426AD3, 2 holes dia 0.225 in. porm 0.008 in.; oa lg of item 2.468 in., oa width 0.540 in. porm 0.030 in.; item has 2 selflkg plates p/n MS21076L3, that has c to c dist of 2.468 in. btwn holes, item is 0.063 in. thk
01-337-2597
Mounting Bracket
Steel, astm A108 comp 1015 to 1025 or steel, astm A576 comp 1015 to 1025 or steel qq-s-698; consists of one block p/n 12285296-1; one tab p/n 12285296-2
01-337-2770
Threaded Spacing Standoff
Item has id of 0.115 to 0.148 in. chromate surface treated internally threaded full length
01-337-2828
Catch Strike
2.150" overall length cadmium or zinc surface treated
01-337-2829
Cylinder Spring Loaded Fastener
Rubber handle; carbon steel latch w/reverse mtg keeper; latch size medium; painted feature-not included
01-337-2831
Mechanical Stop
Used on 7.62mm armament subsy. 0.220" overall width matl is astm-A322 hot rolled or astm-A331, cold finished, 4130, 4140, or 4142 or 172A1659, heat treatment mil-h-6875, quenched & tempered to 33-38 rockwell 'c'; item has 3 holes, 2 having dia 0.225 in. porm 0.007 in. & cbored 0.440 in. porm 0.020 in. fs, these holes have a c to c dist of 0.755 in., the 3rd hole has dia of 0.385 in. porm 0.002 in. phosphate surface treated
01-337-3170
Retaining Clip
01-337-3174
Rod End Connector
01-337-3184
Expansion Shield
01-337-3189
Protective Dust And Moisture Cap
01-337-3190
Protective Dust And Moistur Plug
01-337-3191
Protective Dust And Moistur Plug
01-337-3208
Drawer Extension Slide
01-337-3223
Mounting Bracket
01-337-3224
Mounting Bracket
01-337-3225
Mounting Bracket
01-337-3226
Mounting Bracket
01-337-3377
Mending Plate
Nutplate NAS1791C3-3 cageg 80205 atch to plate; opposite p/n 510-14507-502 cagec 82918
01-337-3378
Mending Plate
Nutplate NAS1791C3-3 cagec 80205 atch to plate; opposite p/n 510-14507-501 cagec 82918
01-337-3379
Angle Bracket
3 holes on 2nd leg; nutplate NAS1791C3-3 cagec 80205 attached to right side; opposite p/n 510-14502-502, cagec 82918 angle
01-337-3380
Angle Bracket
Used on F-15.
01-337-3381
Angle Bracket
Used on F-15. item is rt hnd bracket anodize surface treated
01-337-3392
Access Cover
Used on an/alq 184 ecm pod.
01-337-3394
Access Cover
Used on lantirn targeting pod. item requires 10 solid rivets p/n MS20426AD3-6, csk 100 deg, 1 dbl cover p/n 717511197-019
01-337-3483
Mounting Bracket
Used on F-15. matl aluminum alloy qq-a-250/5 cond 0, oa dims 5.600 x 2.600 x 0.050 in.; item has 5 holes dia 0.191 in., 1 of these holes mate w/68A111128, 68A112110 & 68A112101
01-337-3600
Nut And Bolt Retainer
1.825" overall length 1.215" overall width 0.067" material thickness passivate surface treated anchor
01-337-3601
Nut And Bolt Retainer
1.800" overall length 1.215" overall width 0.067" material thickness passivate surface treated anchor
01-337-3602
Nut And Bolt Retainer
1.300" overall length 0.800" overall width 0.047" material thickness passivate surface treated anchor
