01-319-9266
Protective Dust And Moisture Cap
01-319-9273
Threaded Spacing Standoff
Post, electrical-mechanical equipment
01-319-9387
Mounting Bracket
Furnished with one riser, one pad, two plates, aluminum alloy, qq-a-250/11, alloy 6061, T6; one spacer
01-319-9426
Retaining Strap
3.000" overall length 1.000" overall width 0.0598" material thickness curved arch
01-319-9455
Access Cover
Used on f-16c and f-16d. cover p/o: cover, access-ammo unit, bl 19, lh side
01-319-9621
Mounting Bracket
Used on csrl a/a 48k; aft ejector bracket; b-52
01-319-9679
Angle Bracket
Used on sh-60b acft.
01-319-9687
Access Cover
Used on c11-1 catapult. 11.031" outside diameter
01-319-9731
Dirt And Liquid Deflector
Used on c11-1 catapult. rectangular
01-319-9868
Drawer Extension Slide Section
01-320-0072
Mounting Bracket
01-320-0177
Double Angle Bracket
01-320-0203
Angle Bracket
Used on 2350-01-061-2445. angle
01-320-0205
Manual Control Handle
Used on 2350-01-061-2445.
01-320-0206
Mounting Bracket
Used on 2350-01-061-2445. steel carbon; 5.740 in wide, 4.060 in high, 6.560 deep; to be mounted to bracket-12346200-1 0.19 in thick
01-320-0207
Mounting Plate
Used on 2350-01-061-2445;m1a1.
01-320-0473
Mounting Bracket
7.7500" overall length 1.2500" overall width chromate surface treated
01-320-0496
Access Cover
Cover is bent; 1.421 in. l. one side of bend; 1.760 in. l second side 0f bend
01-320-0532
Butt Hinge
3.250" overall length 0.050" material thickness butt
01-320-0594
Protective Dust And Moisture Cap
01-320-0595
Retaining Strap
01-320-0707
Access Cover
Used on f100pw0229 engine. has one hole, not centered
01-320-0709
Access Cover
Used on pacer special.
01-320-0748
Loop Clamp
Pacer special
01-320-0791
Mounting Bracket
Used on f100pwo229 engine. ni alloy, ams 5544; 3.375 in. o/a lg; 0.750 in. wide one end; 0.450 in. wide other end; 0.033 in. thk; 0.118 in. nom dia mtg holes - 2; hardness 34-44 hrc
01-320-0792
Mounting Bracket
Used on f100pw0229 engine. consists of p/ns 4069434
01-320-0793
Mounting Bracket
Used on f100pw0229 eng.
01-320-0802
Access Door Hinge
Pacer special
01-320-0848
Spring Holder
01-320-0874
Helical Compression Spring Seat
01-320-0882
Retaining Strap
Pacer special
01-320-0949
Angle Bracket
Second corner radius on second leg 0.620 in.; first leg, two inline holes 0.250 in. min 0.256 in. max dia spaced 1.625 in. from flat end; harden passivate surface treated angle
01-320-1078
Mending Plate
01-320-1079
Angle Bracket
Plastic polyurethane surface treated angle
01-320-1080
Angle Bracket
Cut out in second leg 0.513 in. w, 0.300 in. lg chromate surface treated angle
01-320-1081
Angle Bracket
Cut out in second leg 0.450 in. w, 0.220 in. lg chromate surface treated angle
01-320-1084
Angle Bracket
Paint surface treated angle
01-320-1085
Angle Bracket
Two slots on second leg, 0.100 in. lg by 0.060 in. w anodize surface treated angle
01-320-1086
T Bracket
0.380" overall length 5.500" overall width three cres studs, cl-11310, carr lane mfg co installed in center leg edge to an height 1.000 in. oxide film surface treated center projection
01-320-1096
Access Cover
0.265" hole diameter
01-320-1102
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-320-1105
Loop Clamp
6.310" overall length 2.000" overall width 0.250" material thickness self-locking hexagon nut item has two screws zinc band surface treated saddle mount
01-320-1106
Loop Clamp
9.000" overall length 2.000" overall width 0.380" material thickness self-locking hexagon nut zinc band surface treated saddle mount
01-320-1120
Bow Handle
Unf thread series
01-320-1123
Threaded Spacing Standoff
Nickel surface treated internally threaded full length
01-320-1124
Threaded Spacing Standoff
Chromate surface treated internally threaded full length
01-320-1125
Threaded Spacing Standoff
Projection one end left internal thread
01-320-1126
Permanent Magnet
0.890" overall length 0.382" overall width
