01-305-9556
Access Door Hinge
4.810" overall length
01-305-9562
Threaded Spacing Standoff
Left internal
01-305-9566
Strap Fastener Loop
0.260" hole diameter 1.610" overall length 0.119 in. thk stock; mtg hole spaced 1.040 in. from center of hole to forward edge of strap aperture; mtg hole end 0.940 in. w; 1000 lb strength rating; for use w/one inch wide strap cadmium surface treated
01-306-0330
Bow Handle
6.280" overall length anodize handle surface treated unf thread series
01-306-0331
Rod End Clevis
3a rod connection thread class right-hand rod connection 0.516" rod connection thread length 0.190" hole diameter 0.376" overall width cadmium surface treated clevis unf rod connection thread series
01-306-0458
Double Angle Bracket
Pacer special
01-306-0483
Mounting Bracket
Used on f-108 engine.
01-306-0484
Mounting Bracket
Used on f-108 engine.
01-306-0485
Mounting Bracket
Used on e-3 acft. aluminum alloy plate per qq-a-250/4, 2024-T351, 41.600 in. length, 11.900 in. width
01-306-0487
Access Door Hinge
F-16 acft
01-306-0567
Access Cover
Used on hh-2d/sh-2f helicopters. map case cover
01-306-0667
Manual Control Lever
01-306-0724
Lock-release Lever
01-306-0833
Access Cover
Used on aircraft model mh-53e.
01-306-0834
Access Cover
Used on aircraft model mh-53e. cover, race track access amcm sponson end item is mh-53e
01-306-0835
Access Cover
Used on aircraft model mh-53e. cover, race track access amcm sponson
01-306-0908
Webbing Strap
01-306-0982
Helical Compression Spring Seat
01-306-0985
Drawer Extension Slide
01-306-0986
Drawer Extension Slide
01-306-1181
Double Angle Bracket
Used on ah-64a. adjacent angles
01-306-1198
Access Cover
Used on target acquisition designation sight assembly.
01-306-1368
Protective Dust And Moistur Plug
01-306-1386
Manual Control Handle
01-306-1456
Manual Control Handle
Used on aim 7 pylon instn. t-shaped handle, aluminum cast per ams 4218 or qq-a-591, finish is chemical film per mil-c-5541, 1.876 in.min to 2.000 in.max handle lg, 0.600 in.handle width;
01-306-1546
Threaded Spacing Standoff
2b left internal (includes thru thread) thread class right-hand left internal (includes thru thread) 0.4380" left internal (includes thru thread) thread length 32 left internal (includes thru thread) thread quantity per inch cadmium standoff surface treated left internal unc left internal (includes thru thread) thread series
01-306-1547
Threaded Spacing Standoff
Left internal
01-306-1550
Bow Handle
3.180" overall length passivate surface treated unc thread series
01-306-1551
Protective Dust And Moistur Plug
01-306-1608
Protective Dust And Moisture Cap
01-306-1619
Mounting Bracket
01-306-1660
Manual Control Handle
Steel, sae 4130 thru sae 4142; black oxide finish, mil-std-808, finish D210; ess shpaed handle; 8.300 in.lg; 2.700 in.h; 0.500 in.w by 0.360 in.min 0.380 in.max thk stock; plastic pvc plastisol grip applied to one end for 3.500 in.lg, hardness shore a durometer 85-95; pivot pin hole 0.2656 in.dia located 5.459 in.from end w/grip; two steel pins, sae 4130 thru sae 4142; one pin 0.124 in.min 0.126 in.dia by 1.000 in.lg, other pin 0.124 in.min 0.126 in.max dia by 0.940 in.lg; pins welded into moment arm 2.841 in.lg; pins spaced 1.120 in.apart
01-306-1694
Clamping Catch
01-306-1869
Retaining Clip
01-306-1902
Angle Bracket
01-306-1903
Angle Bracket
01-306-1904
Angle Bracket
01-306-1905
Angle Bracket
01-306-1911
Double Angle Bracket
01-306-1923
Nut And Bolt Locking Plate
01-306-1959
Mounting Bracket
01-306-1960
Mounting Bracket
01-306-1961
Mounting Bracket
01-306-2014
Shimmy Damper
Used on uh-60a helicopter.
