01-305-0389
Loop Clamp
1.000" overall width 0.020" material thickness self-locking hexagon nut cadmium bolt surface treated t-bolt
01-305-0427
Manual Control Handle
Alum alloy, alloy 6061-T6; 1.005 in.lg; 1.000 in.w; 0.625 in.h; wedge shaped handle welded to hub; 0.438 in.bore dia by 0.750 in.lg; hub 0.625 in.od; two set screw holes 0.164-32unc-2b spaced 90.0 deg apart; hub chamfered 0.060 in.by 45.0 deg on one end w/second chamfer other end 0.250 in.lg to 0.500 in.minor dia; handle 1.000 in.lg by 0.620 in.w by 0.250 in.major thk tapering to 0.060 in.minor thk; thicker end rounded to 0.310 in.radius; incl two set screws AN565D8H2; iridite finish w/beige colored krylon paint 2504 w/two coats clear krylon paint 1301; do not paint thds; handle welded along length w/thk end flush to hub od;
01-305-0429
Retaining Seal Plate
Circular periphery w/rectangular cross section; one axial through hole
01-305-0435
Mounting Bracket
Corrosion resisting steel, AMS5355, comp 17-4ph; h shaped w/two mtg feet; each leg has a locating dowel pin, MS16555-640 located on base surface
01-305-0437
Mounting Bracket
Consists of one bracket p/n 10866619; one support p/n 10866620; one bracket p/n 10866613
01-305-0445
Manual Control Lever
Used on ct2 mc130h a/c mods. oa lg 2.750 in., has steel locking collar, qq-s-763, cl 304 w/eye on 1 end, eye dia 0.193 in., shank dia 0.235 in., item is passivated oa, qq-p-35, oa dia 0.625 in.; item has knob with knurled gripping surface, knob has a circumference of 1.470 to 1.500 in., and identification marking as well as instructions: "pull to unlock"
01-305-0448
Sealing Plug Assembly
Used on f-101 engine. steel ty 416, qq-s-763; passivate, mil-c-5002; plug dia 0.2903/0.2912 in.; plug lg 0.248/0.262 in.; plug dia opening 0.2394/0.2402 in.; pin lg 0.188/0.197 in.
01-305-0452
Bow Handle
3.400" overall length unc thread series
01-305-0453
Bow Handle
2.188" overall length anodize surface treated unc thread series
01-305-0455
Rod End Connector
Used on C-141. connector rod is chamfered 0.050 x 45 deg porm 5 deg; matl spec is mil-s-6758 cond f-4; item is part of crew door locking system connector
01-305-0502
Threaded Spacing Standoff
Left internal
01-305-0527
Helical Compression Spr Retainer
01-305-0532
Protective Dust And Moistur Plug
Used on cl3 loader. item is used to prevent trash from entering the high pressure quick-disconnect coupling
01-305-0533
Protective Dust And Moistur Plug
Used on cl3 loader.
01-305-0534
Protective Dust And Moi Cap-plug
Used on cl3 loader.
01-305-0535
Protective Dust And Moi Cap-plug
Used on cl3 loader.
01-305-0536
Retaining Strap
1.764" overall length 0.500" overall width 0.032" material thickness cushion color yellow passivate surface treated saddle arch
01-305-0537
Retaining Strap
1.961" overall length 0.500" overall width 0.040" material thickness cushion color yellow passivate surface treated saddle arch
01-305-0547
Spring Tension Clip
0.170" hole diameter 0.010" material thickness
01-305-0548
Spring Tension Clip
0.141" hole diameter 0.020" material thickness cadmium or cadmium surface treated
01-305-0708
Protective Dust And Moisture Cap
01-305-0714
Angle Bracket
01-305-0834
Access Cover
Used on acft model b-1b. 2024-T3511 al aly extr bar per ST0170LB0052; 2.69 in lg, 2.25 in wd, 0.50 in thk; nha L3226900; opposite -006; used on movable lip access upper hinge pin cover.
01-305-0835
Access Cover
Used on acft model b-1b. 2024-T3511 al aly extr bar per ST0170LB0052; 2.69 in lg, 2.25 in wd, 0.50 in thk; nha L3226900; opposite -005; used on movable lip access upper hinge pin cover
01-305-0836
Access Cover
Used on acft model b-1b.
01-305-0837
Access Cover
Used on c-2a aircraft.
01-305-1011
Butt Hinge Leaf
2.750" overall length 0.060" material thickness hinge, right hand butt blank
01-305-1226
Helical Compression Spr Retainer
Used on sentry f22 aircraft. parallel
01-305-1313
Resilient General Purpose Mount
01-305-1503
Protective Dust And Moisture Cap
01-305-1504
Protective Dust And Moisture Cap
01-305-1520
Angle Bracket
01-305-1536
Instrument Mounting Clamp
01-305-1537
Instrument Mounting Clamp
01-305-1611
Mounting Bracket
01-305-1685
Threaded Spacing Standoff
Projection one end w/ right external thread
01-305-1776
Quick Release Plunger
01-305-1912
Mending Plate
01-305-2634
Angle Bracket
01-305-2639
Double Angle Bracket
Plastic polyamide surface treated adjacent angles
01-305-2640
Double Angle Bracket
Three mtg holes in center leg 0.098 in. dia adjacent angles
01-305-2665
Access Cover
0.280" hole diameter two mtg hole located on same centerline along the width on mtg flanges; two rolled over end 0.500 in. w by 14.750 in. lg; two corner notches on flange
01-305-2666
Access Cover
0.280" hole diameter two mtg hole located on same centerline along the width on mtg flanges; one rolled over end 0.500 in. w by 14.750 in. lg; two corner notches on flange
01-305-2667
Access Cover
Color forest green; furnished w/one eye, p/n 7525285, one strap, p/n 7525284, one retainer, p/n 11671448, two pads, p/n 11671479-1; welded plastic surface treated
01-305-2682
Loop Clamp
0.625" overall width 0.031" material thickness cadmium surface treated offset mount
