01-297-6406
Synchro Clamp
0.266" hole diameter
01-297-6440
Mending Plate
20.5600" overall length 4.0600" overall width 1.0500" material thickness rectangular
01-297-6462
Access Cover
Used on lantirn targeting pod. item has multiple holes, is rectangular w/2 lobes; oa lg 4.093 in. porm 0.005 in., oa width 3.218 in. porm 0.005 in.; there are 10 holes w/0.116 in. dia, 82 deg csk x 0.118 in. dia, 7 holes require helical coil thd 0.086-36 unc-2b (per MS33537) ; surrface finish e 511 color no. 37038 per fed-std-595 & light diffusing polyester coating per sm-c-773450, thickness 0.0010 to 0.0015 in.
01-297-6882
Mounting Bracket
Used on B-52.
01-297-6886
Locking Access Door Ring
Used on B-2SE. cam ring assembly
01-297-7080
Protective Dust And Moistur Plug
01-297-7329
Angle Bracket
Used on lantirn mob shelter set. angle
01-297-7330
Angle Bracket
Used on lantirn mob shelter set. a pad 1.620 x 0.590 x 0.031 in. is attached to the 1st leg, 0.380 in. from the edge angle
01-297-7341
Bow Handle
5.375" overall length unf thread series
01-297-7342
Butt Hinge Leaf
Made from LS427-2; is used on c-1130 crew door frame butt blank
01-297-7382
Spring Holder
01-297-7470
Rim Latch Set
01-297-7515
Mounting Bracket
01-297-7516
Mounting Bracket
01-297-7583
Angle Bracket
Angle
01-297-7584
Angle Bracket
Angle
01-297-7597
Access Cover
0.220" hole diameter paint surface treated
01-297-7598
Access Cover
Enamel semigloss surface treated
01-297-7599
Access Cover
0.256" hole diameter 5.060" outside diameter cover bonded to seal w/silicone adhesive; seal, 5.060 in. od, w/eight holes, 0.157 in. min 0.187 in. max dia on a 4.500 in. bolt circle dia, one hole 0.750 in. min 1.250 in. max dia; furnished w/eight captive screws, p/n 5223439-2 paint surface treated
01-297-7616
Block Section Clamp
18.000" overall length 0.500" overall width glass fiber included in material; clamping arch lined w/rubber, synthetic rectangular
01-297-7644
Mounting Bracket
9.300 in. lg; 8.500 in. w 0/a, 0.420 in. thk, one hole 0.530 in. dia; laminate w/resin polyester, mil-r-21607 grade 2
01-297-7645
Mounting Bracket
9.300 in. lg; 8.500 in. w o/a, 0.420 in. thk, one hole 0.530 in. dia; laminate w/resin polyester, mil-r-21607 grade 2, 1.250 in. from c of hole to end along w; opposite of p/n 500009-3
01-297-7663
Rod End Clevis
0.202" hole diameter passivate surface treated
01-297-7781
Protective Dust And Moisture Cap
01-297-7782
Protective Dust And Moisture Cap
01-297-7783
Protective Dust And Moisture Cap
01-297-7785
Retaining Strap
2.280" overall length 0.500" overall width 1.750" material thickness two legs 0.500 in. square; inside corners stress releived by holes 0.180 in. dia extending into clamping area paint surface treated
01-297-7786
Flush Catch
Matl:button trigger steel, bracket steel, pin steel cadmium surface treated flush lever actuator
01-297-7833
Angle Bracket
Angle
01-297-7887
Extension Handle
End item application sliding padeyes
01-297-8001
Straight Headless Rod
01-297-8116
Detent Plunger
Alternate matl is cres 17-4ph precision investment casting per ams 5343, item thk 0.0003 to 0.0005 in.; one end has id of 0.156 in., od 0.312 in., and is chamfered 0.030 to 0.050 in. x 45 deg
01-297-8216
Drawer Extension Slide
01-297-8277
Angle Bracket
Bend radius 0.375 in.; first leg mtg hole thd 0.375-24unf-2b; color white enamel surface treated angle
01-297-8302
Access Cover
0.120" hole diameter 0.300 in. by 45.0 deg chamfered two places; 0.134 in. min paint surface treated
01-297-8392
Mounting Bracket
Steel
01-297-8393
Mounting Bracket
01-297-8394
Mounting Bracket
114.0 mm lg; 25.0 mm w; 7.0 mm thk; two holes 13.0 mm dia, located 83.8 mm min
01-297-8407
Manual Control Lever
C3.970 in. min
01-297-8424
Threaded Spacing Standoff
Left internal
01-297-8425
Threaded Spacing Standoff
Left internal
01-297-8426
Threaded Spacing Standoff
Includes helical coil insert left internal
01-297-8463
Catch Strike
2.440" overall length 1 additional hole on first surface 0.529 in. min passivate surface treated
01-297-8464
Spring Tension Clip
0.032" material thickness cadmium surface treated
01-297-8467
Bumper
0.938" overall length 0.938" overall width center mounting hole 0.312 in. dia
01-297-8695
Manual Control Lever
Used on 6525-01-224-0194. repair part for x-ray appparatus, radiographic, mdl 6622 a
01-297-8700
Swivel Caster
Used on 6520-01-272-4531. for unit mobility of the dental operating
01-297-8778
Lock-release Lever
Used on foot control ii of dental operating
