01-292-9517
Resilient General Purpose Mount
Pad, shock mount
01-292-9522
Spring Tension Clip
01-292-9523
Spring Tension Clip
01-292-9539
Mounting Bracket
01-292-9582
Angle Bracket
Part number 128B10617-8 is the opposite of part number 128B10617-7 cadmium surface treated angle
01-292-9638
Manual Control Handle
01-292-9644
Mounting Bracket
01-292-9647
Threaded Spacing Standoff
Locking insert included internally threaded full length
01-292-9650
Protective Dust And Moistur Plug
Color black
01-292-9656
Clamping Catch
0.130" hole diameter special
01-292-9871
Access Cover
Groove is 0.490 in wide x 0.054 in deep
01-292-9881
Synchro Clamp
C/o retainer, band, wrapper, t-bolt, trunnion, and nut, self-locking; 18.62 in. internal dia
01-293-0058
Angle Bracket
Phosphate zinc or paint surface treated angle
01-293-0125
Mounting Bracket
Steel, astm A108, comp 1018 or steel, astm A36; alipathatic polyurethane, mil-c-53039 or mil-c-46168 or zinc plate, astm B633, type 2, class fe/zn 13; color black; 6.040 in. min
01-293-0182
Vent Plug
2a thread class 0.563" thread length
01-293-0183
Quick Release Plunger
0.578" thread length 18 thread quantity per inch unc thread series
01-293-0184
Spring Tension Clip
0.020" material thickness heat treat to 240 ksi; hardness rockwell RC46 min
01-293-0600
Mounting Plate
Plate, mounting, flat
01-293-0765
Synchro Clamp
Used on electro optical augmentation system.
01-293-0922
Mending Plate
01-293-0923
Mending Plate
01-293-0933
Loop Clamp
0.750" overall width 0.031" material thickness passivate band surface treated offset mount
01-293-1046
Mending Plate
01-293-1047
Mending Plate
01-293-1050
Angle Bracket
Chromate surface treated angle
01-293-1052
Double Angle Bracket
01-293-1105
Loop Clamp
0.500" overall width 0.032" material thickness rectangular
01-293-1138
Retaining Seal Plate
Used on auxiliary sea water pump on caterpillar diesel engine part number 3406bdt onboard 210 ft wmec coast guard vessels.
01-293-1147
Rod End Clevis
01-293-1176
Hinged Threaded Standoff
0.235" thread length hinged to swivel 90 degrees; 1/4 round male passivate surface treated
01-293-1177
Threaded Spacing Standoff
Countersink thds both ends left internal
01-293-1178
Threaded Spacing Standoff
Two helical coil inserts required p/n MS21209C0420 left internal
01-293-1179
Threaded Spacing Standoff
01-293-1180
Threaded Spacing Standoff
Two helical coil inserts p/n MS21209F1-15 required left internal
01-293-1181
Threaded Spacing Standoff
Two helical coil inserts p/n MS21209F1-15 required left internal
01-293-1193
Helical Compression Spring Seat
Anodize surface treated
01-293-1194
Protective Dust And Moisture Cap
01-293-1195
Protective Dust And Moisture Cap
Two holes 0.230 in. min
01-293-1196
Protective Dust And Moistur Plug
01-293-1199
Webbing Strap
01-293-1201
Bumper
4.120" overall length 2.000" overall width one end offset 0.125 in. h
01-293-1243
Mounting Bracket
4.750" overall length 0.750" overall width
