01-285-9401
Bow Handle
7.500" overall length
01-285-9402
Spring Holder
"anodized, mil-a-8625 TY2 CL2" surface treated
01-285-9407
Mounting Bracket
Used on B-52.
01-285-9415
Access Cover
Used on b-2 se dual pylon.
01-285-9417
Access Cover
Used on b-1 se dual pylon.
01-285-9476
Mounting Bracket
01-285-9510
Synchro Clamp
0.495" hole diameter passivate surface treated
01-285-9821
Mounting Bracket
Used on electro optical (eo) augmentation system.
01-285-9845
Mounting Bracket
Used on 2350-01-136-8738 tank,cmbt,m1,imprv armor. material:aluminum alloy; width, 6.940 in.; height, 5.199 in.; for further information refer to drawing, cage 19207, p/n 12345234
01-285-9846
Angle Bracket
Used on 2350-01-136-8738 tank,cmbt,m1,imprv armor. angle
01-285-9853
Access Cover
Used on 2350-01-091-5405.
01-286-0004
Access Cover
0.310" hole diameter has 2 holes 0.218 in. dia for handle; 2 corner radius 0.125 in.; has synthetic rubber chromate surface treated
01-286-0031
Retaining Strap
2.881" overall length 0.500" overall width 0.064" material thickness passivate surface treated saddle arch
01-286-0306
Lever Bracket
Used on 1010-01-233-9493 upgunned wpns stati.
01-286-0349
Butt Hinge Leaf
3.250" overall length 0.037" material thickness butt blank
01-286-0371
Spring Tension Clip
0.095" hole diameter 0.014" material thickness cadmium or cadmium surface treated
01-286-0441
Manual Control Handle
01-286-0470
Mounting Bracket
01-286-0481
Rod End Clevis
01-286-0522
Bumper
Machine screw
01-286-0636
Mounting Bracket
Used on uh-1 rotary wing aircraft.
01-286-0743
Threaded Spacing Standoff
0.240 in. min. flanged with left internal thread
01-286-0755
Lock-release Lever
Used on amraam lau-129. hitem has 2 holes dia 0.105 to 0.108 in. thru 2 walls w/ c to c dist btwn holes of 1.280 in., dist from edge to hole cntr along lg (2 pl) 0.194 in.; item is heat treated to cond H1025 per mil-h-6875, cld passivate surface treated
01-286-0765
Angle Bracket
Angle
01-286-0815
Retaining Strap
5.060" overall length 0.750" overall width 0.051" material thickness aluminum surface treated saddle arch
01-286-0836
Protective Dust And Moisture Cap
01-286-0858
Mounting Bracket
01-286-0897
Angle Bracket
01-286-0898
Angle Bracket
Angle
01-286-0899
Angle Bracket
Right hand use only zinc surface treated angle
01-286-0900
Angle Bracket
Left hand use only zinc surface treated angle
01-286-0901
Angle Bracket
First leg has one additional hole 0.234 in. dia on same centerline as other holes primer surface treated angle
01-286-0902
Angle Bracket
Zinc surface treated angle
01-286-0903
Double Angle Bracket
Two 1.500 in. square plates attached; 2 0.233 in. min, 0.239 in. max dia holes; 8 0.179 in. min, 0.185 in. max dia holes adjacent angles
01-286-0941
Butt Hinge
83.970" overall length 0.070" material thickness butt
01-286-0944
Clamping Catch
0.158" hole diameter passivate surface treated
01-286-0946
Spring Tension Clip
0.022" material thickness lubricant surface treated
01-286-1116
Resilient General Purpose Mount
01-286-1350
Retaining Strap
1.665" overall length 0.469" overall width 0.051" material thickness saddle arch
01-286-1352
Furniture Glide
01-286-1418
Door Handle
0.218 in. hole dia two places with 0.343 in. dia by 82.0 deg countersink zinc surface treated